Changes

The most effective and preferred method is to heat the inside of the oak barrel to at least 140°F (60°C) for 20 minutes with hot water or steam. This has been found to be an effective way of killing ''Brettanomyces''within the wood of 3-year old barrels infected with '(In Progress)'Brettanomyces''. Note that this might not be hot enough to kill other heat tolerant microbes, however, these heat tolerant species tend not to be beer spoilers. Treatments that are higher in temperature and longer should be fine with steam, however, if hot water is used then the longer the water is exposed to the barrel the more character from the barrel that gets soaked out <ref>[https://www.ncbi.nlm.nih.gov/pubmed/25989358 Heat inactivation of wine spoilage yeast Dekkera bruxellensis by hot water treatment. Fabrizio, Vigentini, Parisi,Picozzi, Compagno, Foschino. 2015.]</ref><ref name="Agnolucci_2017">[https://link.springer.com/article/10.1007/s11274-017-2345-z Brettanomyces bruxellensis yeasts: impact on wine and winemaking. Monica Agnolucci, Antonio Tirelli, Luca Cocolin, Annita Toffanin. 2017.]</ref>

Ozone has been shown to be an effective way to kill ''Brettanomyces'' that is buried in the wood of oak barrels (it has been found to burrow as deeply as 8 mm into oak barrels), but the ozone must be applied for an adequate time to allow for the ozone to diffuse into the oak. The amount of time needed to completely kill ''Brettanomyces'' living within barrels with ozone is not known, but it was found that 30 minutes of exposure to 40 mg/m³ ozone concentration was not enough time <ref>[https://www.researchgate.net/profile/Raffaele_Guzzon/publication/225890726_Survey_of_the_yeast_population_inside_wine_barrels_and_the_effects_of_certain_techniques_in_preventing_microbiological_spoilage/links/5472f6170cf2d67fc035d45f.pdf </ref>. The concentration of ozone is known to be a more important killing factor than time, therefore some recommend filling the barrel with liquid ozone, or rinsing with hot water first to open the pours pores of the wood and then rinsing with ozone liquid <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1860978937263645/?comment_id=1861100817251457&comment_tracking=%7B%22tn%22%3A%22R5%22%7D Nate Ferguson of Escarpment Labs. Milk The Funk Facebook thread about using ozone to sanitize barrels. 10/24/2017.]</ref><ref>[https://www.winesandvines.com/features/article/109491/Barrel-Washing-Protocols Wines & Vines website. "Barrel-Washing Protocols". Jan 2013. retrieved 10/24/2017.]</ref>.  The most effective and preferred method is to heat the inside of the oak barrel to at least 140°F (60°C) for 20 minutes with hot water or steam. This has been found to be an effective way of killing ''Brettanomyces'' within the wood of 3-year old barrels infected with ''Brettanomyces''. Note that this might not be hot enough to kill other heat tolerant microbes, however these heat tolerant species tend not to be beer spoilers. Treatments that are higher in temperature and longer should be fine with steam, however if hot water is used then the longer the water is exposed to the barrel the more character from the barrel that gets soaked out <ref>[https://www.ncbi.nlm.nih.gov/pubmed/25989358 Heat inactivation of wine spoilage yeast Dekkera bruxellensis by hot water treatment. Fabrizio, Vigentini, Parisi,Picozzi, Compagno, Foschino. 2015.]</ref><ref name="Agnolucci_2017">[https://link.springer.com/article/10.1007/s11274-017-2345-z Brettanomyces bruxellensis yeasts: impact on wine and winemaking. Monica Agnolucci, Antonio Tirelli, Luca Cocolin, Annita Toffanin. 2017.]</ref>.