Changes

'''Dimethyl sulfide (DMS)''', sometimes spelled "dimethyl sulphide" <ref name="pubchem"></ref>, is the simplest type of [https://en.wikipedia.org/wiki/Thioether thioether] <ref name="Scheuren2016">[http://onlinelibrary.wiley.com/doi/10.1002/jib.301/full Evaporation behaviour of DMS in an aqueous solution at infinite dilution – a review. H. Scheuren, M. Baldus, F.-J. Methner and M. Dillenburger. 2016]</ref>, which are sulfur containing oils that are generally considered off-putting in beer <ref>[https://en.wikipedia.org/wiki/Thioether Wikipedia. Thioether. Retrieved 03/01/2016.]</ref><ref name="Anness">[http://onlinelibrary.wiley.com/doi/10.1002/j.2050-0416.1982.tb04101.x/abstract DIMETHYL SULPHIDE—A REVIEW. B. J. Anness andC. W. Bamforth. 1982.]</ref>. The flavor and aroma of DMS have been characterized as being like cooked sweetcorn, tomato sauce, and celery. In beer, it is sometimes confused with methyl thiocetate, ethanethiol, and dimethyl trisulphide. DMS in beer originates from malt-derived precursors, S-methyl methionine (SMM) and dimethyl sulphoxide (DMSO), and to a lesser extent can be formed during fermentation by certain microbes <ref name="aroxa">[http://www.aroxa.com/beer/beer-flavour-standard/dimethyl-sulphide/ Aroxa. Dimethyl sulphide. Retrieved 03/01/2016.]</ref>. Small amounts of DMS have also been found in hops, which is volatilized during boiling <refname="Scheuren2014">[http://onlinelibrary.wiley.com/doi/10.1002/jib.156/abstract Decomposition kinetics of dimethyl sulfide. H. Scheuren, J. Tippmann, F.-J. Methner, and, K. Sommer. 2014.]</ref>. The flavor threshold of DMS is 30-50 µg/liter. Low levels above threshold between 30-100 µg/liter are considered acceptable and even beneficial to some lagers in the United Kingdom (but not in Germany) <ref name="beersmith"></ref> (~25 minutes in), and maybe some traditional farmhouse ales that are not boiled (see [[Dimethyl_Sulfide#Considerations_for_Historical_Examples_of_Raw_Ale|Considerations for Historical Examples of Raw Ale]]). However, amounts above 100 µg/liter are generally considered offensive for any beer. Ales typically have below the flavor threshold of DMS <ref name="Anness"></ref>. The basis of the understanding of DMS and it's creation in beer was uncovered in the late 70's and early 80's. DMS is a common compound found throughout nature, including having an importance in cycling sulfur in ecosystems involving algae and other microbes, helping the navigation of seabirds, and is found in many foods such as corn, cabbage, parsley, asparagus, potatoes, beef, Camembert cheese, fish (carp), tea, cocoa, milk, wine, rum, beetroot, black truffles, and seafood <ref name="Scheuren2016"></ref><ref name="bamforth">[http://www.asbcnet.org/publications/journal/vol/abstracts/ASBCJ-2014-0610-01.htm Dimethyl Sulfide – Significance, Origins, and Control. Charles W. Bamforth. 2014.]</ref>.

Normal procedure for [[Sour_Worting|kettle souring]] techniques is to boil the wort a second time after the pH has been lowered. The pH is lowered by adding lactic acid bacteria (generally a species of ''Lactobacillus''), and allowing them to ferment and produce lactic acid. In this case yet another consideration is the effect of low pH on the decomposition of SMM into DMS. The [[Dimethyl_Sulfide#Mashing_and_Boiling|half-life table above]] demonstrates that a decrease of -0.3 pH increases the half-life by 5.5 minutes at 100°C. Unfortunately we do not have data to show how low pH values effect the half-life of SMMin reality <ref name="Scheuren2014"></ref>, but assuming it the effect is linear then the conversion of SMM into DMS during the second boil would be greatly reduced. Assuming the effect of pH on SMM half-life is linear, and that every -0.3 pH increases the half-life by 5.5 minutes at 100°C, the half-life table could hypothetically be updated to include data that looks something like what we present in the first column as seen below: