Changes

Jump to: navigation, search

Eccentric Beekeeper Bulldog

1,659 bytes added, 13:24, 24 December 2015
no edit summary
The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See [[Barrel#Racking_Canes|this page]] for other barrel racking canes.
[[File:EBK Bulldog Overview.jpg|300px|thumb|right|Overview of the Essentric Beekeeper Bulldog]]
==Overview==
(To do) [[File:EBK Bulldog Overview.jpg|none|200px|thumb|400px|Overview of the Essentric Beekeeper Bulldog]]
[[File:EBK Bulldog Closeup.jpg|none|thumb|400px|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.]]
[[File:EBK Bulldog Pressure Release.jpg|none|thumb|400px|Adjustable emergency pressure release.]]
[[File:EBK Bulldog Underside.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]]
==Parts List==
[[File:EBK Bulldog Parts.jpg|right|600px]]
 
* [https://www.brewershardware.com/3-8-Compression-X-1-2-MNPT-Bored-Through-Fitting.html 3/8" Compression X 1/2" MNPT Bored Through Fitting, CF3812]
 
* [https://www.brewershardware.com/Silicone-O-Ring-for-3-8-OR38.html Silicone O-Ring for 3/8", OR38]
 
* [http://www.homebrewing.org/Stainless-Steel-Racking-Cane-30_p_904.html Stainless Steel Racking Cane, 3/8" OD x 30" Long]
 
* [http://www.amazon.com/gp/product/B007GDY3CU?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT]
 
* [http://www.amazon.com/gp/product/B003GSL35O?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Stainless Steel Pipe Fitting, Reducing Bushing, 1/2" NPT Male X 1/4" Female]
 
* [https://www.brewhardware.com/product_p/cross12.htm Stainless Steel Pipe Fitting, 4-Way Cross, 1/2 NPT Female]
 
* [http://www.williamsbrewing.com/MALE-NPT-CORNY-POST-ADAPTER-P3404.aspx Male NPT Corny Post Adapter, P14]
==Parts List==* [http://www.williamsbrewing.com/CORNELIUS-TYPE-GAS-SIDE-PLUG-P3332.aspx Cornelius-Type Gas Side Plug, P53] - This no longer includes the needed Universal Poppets (our item L92) or Ball Lock O Rings (To doitem D12). You will need one L92 and one D12 in addition to this post to complete your male in gas fitting. * [http://www.williamsbrewing.com/UNIVERSAL-POPPET-VALVE-P2924.aspx Universal Poppet Valve, L92] * [http://www.williamsbrewing.com/BLACK-KEG-FITTING-O-RING-BALL-LOCK-P59.aspx Black Keg Fitting O Ring - Ball Lock, D12] * [https://www.brewershardware.com/2-Tri-Clover-X-1-2-Male-NPT.html 2" Tri Clover Compatible X 1/2" Male NPT, TC20M12]
[[File:EBK Bulldog Parts.jpg]]<br /><br /><br /><br /><br />
==See Also==
Retrieved from "http://www.milkthefunk.com/wiki/Special:MobileDiff/3653"

Navigation menu