Changes

Unless very large amounts are added, most fruit does not greatly change the overall alcohol content of the beer that it is added to since most fruit is within the 1.045-1.060 starting gravity range, or lower <ref>[http://www.brsquared.org/wine/CalcInfo/FruitDat.htm Ben Rotter. "Fruit Data: Yield, Sugar, Acidity, Tannin". Improved Winemaking website. 2011. Retrieved 03/16/2018.]</ref>. Wine grapes are a notable exception to this, which have high starting gravities that produce 10-15% ABV wines. When adding fruit with average gravities to beer and allowing it to re-ferment, small changes to the ABV can occur based on the amount and type of the fruit, the format of the fruit, and the ABV of the beer. For example, if a fruit puree that has a typical gravity of around 1.045 is added to a 10% ABV beer, the more puree that is added then the more it will dilute the total ABV of the beer. Fruit concentrates and dried fruit may add more alcohol than when added in juice/whole fruit format because the water content of the fruit has been removed, although lower dosages of concentrate/dried fruit might result in only small or insignificant ABV increases. The gravity of whole fruit or juice can be fairly easily determined by using a refractometer. [http://sourbeerblog.com/a-guide-to-blending-sour-beer-with-fruit/ Matt Miller of Sour Beer Blog] provides a calculator that can help predict alcohol changes based on the gravity and quantity of the fruit (and beer), and [https://www.themadfermentationist.com/2010/10/adding-fruit-to-beer-increases-alcohol.html Michael Tonsmeire of The Mad Fermentationist] provides a calculation as well.