13,703
edits
Changes
added section "Notes on Fermentation Timeframes"
Once the wort has fermented out (allowing 2 weeks total is a good rule of thumb), decant the beer and pitch the collected yeast into 500ml of starter wort, again lowering the pH of the starter wort to 4.5 with lactic acid. After the starter wort has been fermented, the yeast should have enough of a population to ferment out a 1 gallon batch of wort. Keep the recipe of the wort simple, and in the 1.050 gravity range. The yeast cell count should be high enough at this point to out-compete bacteria and lower the pH of the wort within a few days. The pH of the 1 gallon batch, therefore, does not need to be lowered, although the brewer may choose to do so anyway. For [[Wild_Yeast_Isolation#Safety|safety reasons]], test to make sure that the beer fully attenuated and has a pH of 4.5 or less. Allow for one month after fermenting the 1 gallon batch of beer before sampling. If it smells like feces or vomit, do not sample it and throw it away. If the beer smells ok, feel free to sample the beer to see if the wild yeast produced a good tasting beer. David Thornton from [[SouthYeast Labs]] estimates that only about 10% of yeast that can fully attenuate produces favorable results, so failures are to be expected (keep trying!) <ref name="Thornton"></ref>. Fermenting a few batches of beer at different temperatures is a useful method for identifying the ideal fermentation temperature range for the yeast.
See also:* See [https://www.facebook.com/groups/MilkTheFunk/permalink/1676671082361099/ advice from DeWayne Schaaf and others on bioprospecting techniques without isolating microbes on MTF].
* See [[Mold]] for identifying mold and safety issues with mold.
* Microbes cannot be accurately identified based on what their pellicle looks like. See [[Pellicle#Pellicle_Appearance_as_a_Microbe_Identifying_Indicator|Pellicle]] for more information. ===Notes on Fermentation Timeframes===Some wild captures might take a long time to ferment. Most wild caught, non-isolated cultures that can ferment the sugars in wort take 2-4 weeks to ferment, although some can take longer and some can take less time (even just a couple of days). This is impossible to predict due to the impossibility of predicting what microbes are in a non-isolated wild culture. For example, wild ''Brettanomyces'' might take a long time to finish fermenting (up to 8 months to reach a stable gravity, according to Matt Spaanem). In some experiences, krausen will form for a few days, and then drop, and then form again (presumably as another microbe starts fermenting). Others ferment long and slow over a month or so. Once re-pitched with higher cell counts, often the fermentation times will hasten, but other times they will not. The best piece of advice is to take gravity readings to determine when the fermentation is finished instead of relying on visual indicators. Even though there could be a krausen and signs of fermentation, if the fermentation is going slow then it is possible that the sugars in the wort are not being fermented effectively (this might improve upon re-pitching as this should help select for microbes that can withstand this environment; see reference for more details on MTF members' experiences) <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1777108328984040/ DeWayne Schaaf, Christophe Boebion, Tobias Häberli, Justin Amaral, Bryan from Sui Generis blog, Matt Spaanem, Josh Regenold, Guy Greenhalgh, Jason Pallett, Caroline Whalen Taggart. Milk The Facebook group on how long fermetnation takes for wild caught cultures. 08/01/2017.]</ref>.
===Safety===