Soured Herb, Spice, and Vegetable Beer

From Milk The Funk Wiki
Revision as of 21:42, 28 September 2016 by DanABA (talk | contribs)
Jump to: navigation, search

(In progress)

Sour Herb, Spice, and Vegetable beer is mixed fermentation, sour or brett beer with the addition of spices, herbs, or vegetables. These beers, along with Soured Fruit Beers would fall into the 2015 BJCP style of 28C - Wild Specialty Beer. Here we will discuss the use of spices, herbs, and vegetables in sour beers and give recommendations based off of those brewed by MTFers and commercial brewers.

Spices

For spices, generally fresher is better. Whole spices maintain their freshness better than pre-crushed spices, and it is recommended to use the freshest spices you can get and to crush them fresh right before using them rather than to use pre-crushed spices. On a home scale this can be easily accomplished with a mortar and pestle. Commercial producers may find that blenders or coffee grinders are better for larger spice quantities. Smell you spices before using them. If they seem stale or muted, it might be a good idea to look for fresher spices.

Some types of spices, such and flowers or citrus zest, may not need to be crushed before use. These spices can be found fresh as well as dried, and fresh spices will generally have stronger or more complex aromatics. For zesting your own citrus fresh, both a zester or a vegetable peeler will work to remove the zest. Using a vegetable peeler may give more complexity[1], and peelers give more manageable pieces of peel.

When to add and Methods of Extraction

Spices are commonly added between flameout on the hot side and secondary on the cold side. In order to preserve the aromatic properties of spices, they are generally better added later in the brewing process. They can also be added by preparing tinctures and dosing the beer or by soaking the spices in hot water in a sealed mason jar and then adding the mixture. Both of these methods can help to limit the possibility of microbe pickup from adding spices on the cold side.

  • Decoction – A decoction is a boiled tea of the spices/herbs/etc. Using higher heat and a longer duration of a gentle boil helps to extract bittering compounds. Experiment with the spices you want to use to determine the proper time and temperature combination. The benefit of doing a tea extract compared to simply adding herbs/spices to the boil is that the tea approach gives the brewer added control of flavor balance and can help to prevent the extraction of too much bitterness or other overpowering flavors.
  • Alcohol extraction: Also called a tincture, this is an extraction of flavor compounds from the herbs and spices by cold soaking in pure or high-concentration alcohol. Chemical compounds are differentially soluble in alcohol compared to water and alcohol can better extract hydrophobic compounds such as some essential oils, resins, and organic acids. Tinctures can be made using varying alcohol percentages which may lead to different results in the extraction. Tinctures are generally a very concentrated and convenient for extracting and storing herbs. Tinctures also offer a good level of control over the dosage. Brewers can experiment with the dosage of tinctures by creating test blends of tincture (at the drops level) with samples of the beer that will eventually receive the tincture or a similar beer. 20% alcohol is the minimum requirement for shelf-stability. Tinctures may not viable if you are trying to measure or maintain a certain ABV as you will be adding alcohol along with the herbs/spices.
  • Barley wine or wine extraction Wine can also be used as a method of extraction and preserving herbs. White wines are more often used traditionally due to the high tannin content of red wine, which may interfere with alkaloid rich herbs. Wine extraction may also be adapted to imperial or high gravity beer samples, such as using a barleywine, for steeping high volumes of herbs in the beer and then dosing the extraction back to larger batches later. If using this method, consider the influence of the solvent, which has its own flavor, along with the flavor of the herbs or spices you are using. This method is also not recommended if you need to maintain a certain ABV.
  • Cold pressing- Cold pressing is similar to a French press in mechanics, but using cold water for extraction. Using sterile water, such as boiled and cooled water, is recommended. 2-24 hours maceration of solids is often needed for this method. Cold extraction allows for retention of volatile compounds that would be lost by extraction methods involving heat. This is especially true if this method is used after or near the end of fermentation so that volatile compounds are not lost during fermentation.

Herbs

Herbs can be used fresh or dried.

When and how to add

The same basic consideration for spices apply to herbs. Herbs are typically added between the end of the boil and secondary fermentation/aging.

Dandelions

The following is provided by James Sites [2]:

  1. Since you want to use the petals only (or maybe not), you want to pick your flowers away from anywhere that sprays and you want to pick them around noon or so, when the flowers are fully open. Ingo Janssen adds: pick the dandelions when they are young and the flower is about to open. You can then pick the petals in one go, just tear away the green leaves around them and you're left with a nice compact set of petals.
  2. After you pick your flowers you're going to want to depetal them as soon as possible because they will eventually close, making it a more difficult process. If you get a little green with the petals, don't worry about it, as long as most of what you have is the yellow.
  3. The optimum ratio for dandelion wine is 100 grams of petals per 2 quarts of water. In my last beer I used 760 grams (25.7 oz.) for approximately 5 gallons of water, so about 3/4ths of that amount, with good results. For reference, that amount took me about 2 hours to pick and about 7 hours to depetal. It's an intensive process. Get ready for your fingertips to be dark brown.
  4. Since you can freeze the petals, you can do this in stages until you have enough to make the tea for your beer.
  5. After you have gathered enough petals, you want to soak them in hot water for 2 days to make the tea. I just put them into a mashtun and pour boiling water over them and close the mashtun. Stir the petals at least twice a day.
  6. After the two days, separate the petals from the water (another reason a mashtun is useful) and use it however you want. If you're an extract brewer, you can add extract directly to the water and brew the rest of your beer normally. If you're brewing all grain, I'd use the dandelion tea as sparge water.

See also:

Elderflowers

The following is provided by Raf Soef of Bokkereyder [3]:

  • Pick the elderflowers in the early morning, they're at their best then. After a day of sitting in the sun, part of the aroma has evaporated, and it recovers at night.
  • If you hold the flowers upside down, tap it, and the yellow powder falls out, they're at their prime to be picked.
  • One night maceration will do. No matter how well you cut off the branches, there will still be a whole bunch left. One night maceration extracts the noble aroma of the flowers and not the green/peppery aroma of the branches (or at least to a lesser extent).
  • If you chill your beer before the maceration, to get an actual 'cold' maceration, the extraction is even more pure.
  • Barrel age the elderflower lambic for another half year, it will make it way more balanced.
  • Respect the nature of your beer and the nature of the flower and you'll be happy.

Coffee

Generally, cold brewed coffee is used or "dry beaning" is used where cold brewed coffee or whole coffee beans are added to the beer shortly before packaging. Cold brewed coffee can be added incrementally to taste. If "dry beaning", 12-48 hours are recommended to fully extract the coffee from the beans. There are many differing opinions on what types of varieties and roasts to use; the best advice is to test several coffees and choose the one that best fits the beer. The best drinking coffee may not be the best coffee to use in a sour beer, and different coffees might be better suited for different beers [4]. See this MTF discussion.

Vegetables

Some suggestions on using hot peppers: The spice is in the seeds. Removing the seeds will shift the balance toward flavor and away from spice. Some suggest removing the seeds, and others say they like the qualities of the seeds but are careful to control contact time[5].

When and how to add

Many vegetables, such as squashes/gourds and root vegetables contain starches which you may wish to convert to fermentable sugars by including the vegetables in the mash.

General Usage Suggestions

(in progress) This table gives some suggestions based off of what has worked for MTFers and commercial breweries. It is not a completely exhaustive list, and you are encouraged to add your experiences and experiment outside of this list. Before using anything, be sure that it is safe to use and does not pose a health risk. Parts of some plants that have other parts commonly used for spices as well as plants similar to those used as spices can be toxic (e.g. Rhubarb leaves, parts of elderberry plants, some varieties of juniper). Similarly, if foraging always be 100% sure of what you are picking. Take someone with you with experience if you do not have the appropriate experience and take pictures of what you pick. There is a saying "There are old mycologists and bold mycologists but there are no old & bold mycologists." First and foremost be careful when foraging anything.

- Use single spices until you know how they affect the beer and then blend accordingly for balance. Collect notes on your amounts, process and the full range of any ingredient to help for future beers.

- Look for balance when blending spices with teas and tinctures. For example, wood sorrel (Oxalis acetosella) is rather tangy tart and blends well with nutmeg or star anise in darker ales, but maybe better with lemongrass or ginger in lighter beers.

- Fresh living herbs can taste and give off drastically different flavors and concentrations than dried or dried/crushed versions and can also be very different than powdered forms. This may be especially true of more delicate and tender herbs such as lavender, lemon balm , dandelion, wood sorrel and fresh basil, compared to herbs such as thyme, rosemary, fennel and other more fibrous herbs.

  • Do you have some input from your experiences brewing sour herb/spice/vegetable beers? Please add your thoughts in this MTF Facebook thread.
  • As spices are typically used in small amounts, we've presented this table in units of g/l to avoid awkward decimal values. To help those who are metrically challenged, follow this link to convert to oz/gal.
Spice/Herb/Vegetable Format Amount Added in Contact Time Commercial Examples
Basil Fresh leaves 1.5 g/l Secondary 1-2 weeks [6]
Beats Fresh and Funky More is better Anywhere hot side to aging and conditioning More is better Dock Street Ain't Nothing to Funk With
Beets Juice (Lakewood® brand) 13-64 fl oz/gal (3.4-16.9 fl oz/l) [7] Secondary 1-2 months (less for kettle sours) Jester King Hibernal Dichotomous 2015
Chocolate
Cilantro Fresh leaves >2.25g/l [8]
Citrus zest
Coconut
Coffee Whole beans ~11-12 g/l [9] Secondary 48 hours All Systems Go by The Rare Barrel, Coffee Minotaur by Orpheus Brewing, Lunex by Black Project
Coriander Whole, freshly crushed Many examples of Gose
Cucumber Fresh, skinned and sliced <1/2 cucumber per gallon[10] secondary
Elderflowers Whole, fresh Secondary Cantillon Mamouche
Ginger Root Dried ~3.5 g/l [11] (~52 minutes in) Secondary Minimal contact (TRB uses a Torpedo/hop rocket) The Rare Barrel Sourtooth Tiger
Grains of Paradise dried, crushed Rare Barrel Grainsta's Paradise
Fenugreek leaves a bit less than 0.4 tbsp/gal [12]
Hay Mash Jester King Repose
Hibiscus Dried 2-8 g/l (boil)/2-4 g/l (secondary) [13] 5-15 mins in Boil (longer time in boil for more tartness) Bend Brewing Co. Ching Ching Berliner.
Honeysuckle Fresh 1 gallon volume per 5 gallons of beer [14] secondary
Mushrooms Upright White Truffle Gose; Jester King Snörkel
Oak See Barrel Alternatives
Peppercorns, black dried, crushed
Peppercorns, Pink dried, crushed
Peppers, hot Upright Fatali Four
Rhubarb Fresh secondary Cantillon Zwanze 2012
Rosemary Fresh Leaves 4-6" sprig per 5 gallons[15] End of boil to secondary
Spruce Tips Fresh 10-12g/gallon[16] Secondary 3 days room temp, 3 days cold crash[16]
Tea Dried leaves 50-100 grams in 1 L water cold brewed 24-36 hours [17] Secondary
Thyme Jester King Hibernal Dichotomous 2015
Vanilla Whole pods Rare Barrel Home Sour Home
Wakame (Seaweed) ~70 grams for 20 liters [18] secondary
Yarrow Upright Flora

See Also

Additional Articles on MTF Wiki

External Resources

References

Von Seitz Theoreticales Brewery. theoreticales.com