Foeder

From Milk The Funk Wiki
Revision as of 10:37, 30 October 2019 by DanABA (talk | contribs)
Jump to: navigation, search

A foeder (pronounced FOOD-er) is the Dutch word for a large wooden barrel set vertically and used for either long term fermentation or primary fermentation. In Dutch, the synonym "vaten" is often used, which translates to English as "vat". The term "vat" is used in the United Kingdom. It is written as "foudre" in French, or "foedre" by some American breweries (the word "foudre" in French more typically means "thunderbolt" [1]). A foeder can range in size from 600 to 1 million liters [2][3][4][5].

Images

  • Casey Brewing and Blending wine barrels converted to foeders

  • Smaller sized Foeder example in a brewery located in Dusetos, Lithuania

  • Bearded Iris Brewing 1000G foeders

  • Bearded Iris Brewing small foeder for experimental brews for primary fermentation and inoculation.

Care

"As for the Foeders, you'll want to get the Foeder in place and swollen right away. Hot Liquor from your HLT will do the job. I really like to set up a CIP type loop. About 1 bbl of HLT liquor in the foeder then a loop with a spray ball up top in the foeder through the manway hole. Then we use a product called ACTO 140 sold by Berko chems [Birko Chemicals]. We loop that for about 30-60min. Then rinse with HLT liquor. Then if you can't purge with CO2 and fill with beer the next day we fill the Foeders up with potassium metabisulphite and citric acid. The rate is 2g of Kmeta and 1g of citric acid per litre of filtered water. Then keep this in the Foeder till you are ready to empty and fill with beer." - Chad Yakobson in an email to Brad Primozic; independently verified and approved for publication by Chad Yakobson in a private email with Dan Pixley [6].

As with barrels, thoroughly rinse the citric acid and potassium metabisulphite from foeders before filling them. Flush them with CO2 as well before using them if possible [7].

Rocky Mountain Barrel Company advises that when hydrating a new dry foeder, it is best to fill it incrementally. Otherwise, the pressure from being completely full will be too strong for any leaks towards the bottom of the tank to seal [8].

See also:

Repairs

  • Brandon Jones recommends wet liner epoxy to seal cracks in barrels; use on the inside as per the manufacturer's instructions [9].

Designs

Egg shaped

Egg shaped foeders sit horizontally and are reminscient of an egg shape. This has the benefit of taking advantage of vertical space, as well as limiting headspace moreso than traditional foeders [10].

Suppliers/Manufacturers

The following businesses specialize in the crafting and/or selling of foeders.

See Also

MTF Threads

Additional Articles on MTF Wiki

External Resources

References

  1. ↑ Foudre. French Wikipedia. Retrieved 10/23/2019.
  2. ↑ Dutch Wikipedia. Rodenbach (brouwerij). Retrieved 10/23/2019.
  3. ↑ Martyn Cornell. Zythophile magazine. 10/18/2019. Retrieved 10/23/2019.
  4. ↑ Ron Pattenson. Shut Up About Barclay Perkins blog. 05/10/2019. Retrieved 10/23/2019.
  5. ↑ Jim Dykstra. "What is a Foeder?". The Beer Connoisseur. 09/08/2016. Retrieved 10/23/2019.
  6. ↑ Conversation with Brad Primozic on the Milk The Funk Facebook group. 3/5/2015.
  7. ↑ Conversation with Mike Makris of The Rare Barrel and Brandon Jones of Yazoo Brewing Co regarding rinsing and flushing foeders. 12/22/2015.
  8. ↑ [https://www.facebook.com/rockymbc/photos/a.10151106541736918/10156661511646918/?type=3&theater Rocky Mountain barrel Company Facebook post. 10/30/2019.]
  9. ↑ Brandon Jones. Milk The Funk Facebook group thread on repairing a crack in a foeder. 11/17/2018.
  10. ↑ Shane Stewart and Ryan Buxton. Milk the Funk Facebook gropu post on egg shaped foeders. 02/16/2018.
  11. ↑ Conversation with Jeff Porn on MTF. 5/25/2015.
Retrieved from "http://www.milkthefunk.com/w/index.php?title=Foeder&oldid=12873"