Eccentric Beekeeper Sampling Syringe and Purging Wand

The Eccentric Beekeeper Sampling Syringe and CO₂ Purging Wand are two simple devices for sampling/purging through a 3 piece airlock and for purging any sort of vessel, including those with a small opening, with the goal of minimizing oxygen exposure. These were discussed on Milk The Funk "The Podcast" Wiki Kwiki Episode #003.

CO₂ Purging Wand

The CO₂ Purging Wand can be hooked up to Cornelius type ball lock connector. The stainless steel tubing is available on Amazon. The drive regulator is optional for allowing a very precise flow rate of gas.

• 

  Parts list.

• 

  Drive regulator setup

Demonstration:

Sampling Syringe

The sampling syringe is made up of the same stainless steel tubing attached to a 100 cc plastic syringe with a small section of 1/4" ID, 3/8" OD plastic tubing.

Build and demonstration:

Demonstration with Sanke fermenter (for the sanke Fermenter build, see Sanke Fermenter):

See Also

Additional Articles on MTF Wiki

• Eccentric Beekeeper Bulldog
• Sanke Fermenter
• Mixed Fermentation Aging
• Barrel