Difference between revisions of "Eccentric Beekeeper Sampling Syringe and Purging Wand"
(Created page with "The '''Eccentric Beekeeper Sampling Syringe and CO<sub>2</sub> Purging Wand''' are two simple devices for sampling through a 3 piece airlock and for purging any sort of vessel...") |
(No difference)
|
Revision as of 11:12, 24 October 2018
The Eccentric Beekeeper Sampling Syringe and CO2 Purging Wand are two simple devices for sampling through a 3 piece airlock and for purging any sort of vessel, including those with a small opening. These were discussed on Milk The Funk "The Podcast" Wiki Kwiki Episode #003.
Contents
CO2 Purging Wand
The CO2 Purging Wand can be hooked up to Cornelius type ball lock connector. The stainless steel tubing is available on Amazon. The drive regulator is optional for allowing a very precise flow rate of gas.
Parts list.
Drive regulator setup
Demonstration:
Sampling Syringe
The sampling syringe is made up of the same stainless steel tubing attached to a 100 cc plastic syringe with a small section of 1/4" ID, 3/8" OD plastic tubing.
Build and demonstration:
Demonstration with Sanke fermenter (for the sanke Fermenter build, see Sanke Fermenter):