Difference between revisions of "Sanke Fermenter"
| Line 1: | Line 1: | ||
| + | '''Sanke Fermentors''' are a relatively cheap alternative to purchasing a stainless steel conical fermentor. A brand new Sanke Keg and a Brewers Hardware Sanke Fermentor Keg Kit can be purchased for $200. Compare that to $640 for a similar sized Blichmann. | ||
| + | |||
| + | == Advantages to fermenting in a stainless steel Sanke == | ||
| + | * Safer than a glass carboy | ||
| + | * Little to no light or oxygen exposure | ||
| + | * Harder to scratch than plastic | ||
| + | * Able to be safely pressurized for transfering with CO2 | ||
| + | |||
<gallery> | <gallery> | ||
File:Brewers hardware sanke.jpg|Brewers Hardware Sanke Fermentor Kit | File:Brewers hardware sanke.jpg|Brewers Hardware Sanke Fermentor Kit | ||
Revision as of 07:50, 1 April 2015
Sanke Fermentors are a relatively cheap alternative to purchasing a stainless steel conical fermentor. A brand new Sanke Keg and a Brewers Hardware Sanke Fermentor Keg Kit can be purchased for $200. Compare that to $640 for a similar sized Blichmann.
Contents
Advantages to fermenting in a stainless steel Sanke
- Safer than a glass carboy
- Little to no light or oxygen exposure
- Harder to scratch than plastic
- Able to be safely pressurized for transfering with CO2
Brewers Hardware Sanke Fermentor Kit
Sanke Fermentor with a waterless airlock
Sanke Fermentor with a 3 piece airlock
Parts You'll Need
Brewers Hardware Sanke Fermentor Kits
- American Sanke Keg Fermentor Kit without Thermowell $74.00
- American Sanke Keg Fermentor Kit with Thermowell $84.00
Sanke Fermentor With a Waterless Airlock
- Legally Obtained Sanke Keg
- TC20CLAMP 2" Tri Clover Compatible Clamp $7.00
- TC20FER14AMP 2" Tri Clover Compatible Ferrule - Long $8.50
- F1GASSIL Silicone Flat Half Gasket for 2" Tri Clover Compatible Cap $2.00
- Silicone Waterless Airlock $4.00