Hops

Jester King Brewery in Austin, Texas aging their own hops in an old barn. Image provided by Jeffrey Stuffings.

Hops are the flowers (also called seed cones or strobiles) of the female dioecious (meaning that they have separate male and female plants) plant Humulus lupulus , and are used in brewing for flavor as well as for antimicrobial properties. Although bitterness from boiling hops is generally not desired in sour beers, sour and funky brewers can use hops to help regulate lactic acid bacteria and control acid production to desired levels, especially in aged mixed-fermentation or spontaneous fermentation beers. Additionally, it may be argued that the earthy bitterness from aged hops is desired for lambic based styles (see Hops in lambic below). Potentially other mixed fermentation styles can benefit from some degree of bitterness either from aged or fresh hops such as saisons, farmhouse ales, and experimental styles. So while the mantra for sour beer is that "bitterness and sour don't work together", there are certainly exceptions to this rule. Brewers who are interested in rapid acid production using quick/kettle souring techniques such as wort souring may wish to limit or avoid hop use before acidifying so that sufficient acid is produced quickly.

Hop Composition

The main compounds of interest to brewers in hops are their bitter acids and oils contained in the yellow-colored lupulin glands. There are at least 250 significant aroma and flavor compounds found in hop acids and oils. Alpha acids account for roughly 2-17% of dried hops by mass, beta acids account for roughly 2-10%, and oils account for roughly 0.5-3%, though the exact percentages will vary depending on factors such as the hop varietal, growing region, harvest time, and growth conditions for the year. The rest of the weight of hops is contained in the leafy matter called Bract and is made up of 40-50% cellulose and lignin, 15% protein, 8-12% water (after drying), 8% minerals, 3-6% polyphenols and tannins, 1-5% lipids and fatty acids, 2% monosaccharides, and 2% pectin .

Acids

Alpha acids (also called "humulones" and abbreviated as "α-acids") in hops mostly consist of humulone, cohumulone, and adhumulone. Trace amounts of other forms of humulones are also present but are difficult to quantify and currently have limited research: posthumulone, perhumulone, adprehumulone, and acetohumulone . The ratio of these individual acids to each other can vary based on hop variety much like total iso-α-acid percent, though generally the primary acids are humulone and cohumulone. Cohumulone has been identified by some researchers as a source of a more harsh bitterness, although similar research contradicts this statement . Being hydrophobic, alpha acids are mostly insoluble in wort at typical brewing pH (alpha acids become much more soluble as the pH rises towards 5.9 to 7, which is not typical for wort production ). During boiling, alpha acids are isomerized into iso-alpha acids (also called isohumulones) that are soluble. Isomerization leads to roughly a 70%/30% split between diastereomeric isomers called cis and trans iso-α-acids respectively, with cis iso-α-acids being more stable over time and more bitter. Alpha acids themselves do not taste bitter, but isomerized alpha acids (iso-α-acids/isohumulones) contribute to the bitterness of beer and have antimicrobial properties. Isocohumulone is often cited as being more harshly bitter than the other iso-α-acids, but studies of taste perception of individual iso-α-acids have not agreed with this. However, iso-cohumolone is slightly more soluble than the other acids and therefore a hop with a higher cohumulone composition may result in a beer with higher iso-α-acid for hops of equal iso-α-acid percent and use in brewing but different iso-α-acid breakdown. Alpha acids are susceptible to oxidation and the alpha acid content of a hop will decrease with storage.

There is evidence to show that during wort boiling iso-humulone and perhaps also iso-cohumulone bind with the head forming proteins, Lipid Transfer Protein (LTP) and Protein Z, to help form foam-positive structures in beer. These iso-alpha acids bind less so with LTP than they do with Protein Z. The resulting bound structures have been described as "vesicles", which are protein "bubbles" (but with no gas in them) with thick surface layers . See also Escarpment Labs presentation on the science of beer foam.

Beta Acids (lupulones) are similar in structure to alpha acids and have the analogous individual beta acids (lupulone, colupulone, adlupulone, prelupulone, postlupulone, adprelupukone, and acetolupulone ) to individual alpha acids. In their original form, beta acids do not contribute to the flavor of beer because they are not soluble in beer unless the pH of the boiling wort is significantly raised to around 7 pH (which is not typical in brewing conditions) and the original gravity is relatively low (2-8°P) . They are also not able to isomerize during wort boiling. Beta acids do not become soluble in wort or beer unless they are chemically modified by a process such as oxidation , nor are they soluble in beer when dry hopping . Oxidized beta acids are soluble and can contribute to bitterness in beer. Oxidized beta acids are discussed more under aged hops.

Isomerization of Alpha Acids

The isomerization of alpha acids into iso-alpha acids is mostly dependent on alpha acid content of the hops, time (to a certain extent), temperature, original gravity, hop rate (hop weight), and IBU saturation. Other variables also affect isomerization to a lesser extent such as pH and calcium concentration . The higher the gravity of wort above 1.050 SG, the more proteins coagulate and drop iso-alpha acids out of solution (lower gravity worts are not affected by this). During fermentation, yeast cells can absorb iso-alpha acids, which results in further loss of iso-alpha acids in the finished beer . Lower flocculating yeast strains tend to reduce the IBU in finished beer more than high flocculating yeast . Significant isomerization of alpha acids can occur in water without sugar at all (temperatures around boiling are still required), which is relevant in the production of "hop tea" in traditional farmhouse brewing where hops are steeped in hot water for some time, and this is said to extract bitterness from the hops . Aside from boiling hops in wort, Hydrodynamic Cavitation at a 90°C temperature is another method that results in the isomerization of alpha acids into iso-alpha acids; although an additional 10 minutes of boiling at 100°C was needed to remove DMS and achieve hot break. This method reportedly had a 33% savings in energy costs in one study.

Malowicki and Shellhammer determined a calculation that predicts the isomerization rates of alpha acids into iso-alpha acids at different temperatures. Beginning at the boiling temperature of 100°C/212°F, which could be considered a rate of 100%, at 96°C/205°F the rate is 72%, and at 90°C/194°F the rate is 43%. This rate continues to drop significantly as the temperature of the wort decreases. At 82°C/180°F isomerization occurs at a rate of 17%. At a temperature of 50°C/122°F, the isomerization rate is at 1%, and finally 0% at 45°C/113°F (note that Kishimoto et al. (2021) reported that isomerization begins somewhere between 60-70°C ). This fact has several impacts on brewing processes. For example, when brewing at higher altitudes where the boiling point of wort is less than 100°C/212°F, the isomerization of alpha acids into iso-alpha acids will be reduced to whatever the rate is at that lower temperature. "Hop stands" or "whirlpool additions" where hops are left in contact with hot wort that is less than boiling temperature will continue to isomerize alpha acids .

The hopping rate (weight) and IBU saturation have a drastic effect on IBU's. Aaron Justice reported a higher utilization when using Polaris hops (17.6% alpha acids) versus Tettnang hops (1.9% alpha acids). Two beers were brewed using enough of each of the hop varieties to target a calculated 40 IBU. However, the beer brewed with Polaris hops had 42.6 IBU and the beer brewed with Tettnang hops had only 28 IBU. It was hypothesized that the higher surface area of more hop matter reduces IBU's by binding to iso-alpha acids and possibly other compounds that register on the standardized IBU test. Justice also reported that more IBU pickup from whirlpooling was possible in beers without hops added in the boil, indicating that IBU saturation can limit IBU's, with a maximum IBU being around 100 .

The pH of the wort appears to have no significant effect on the isomerization of alpha acids to iso-alpha acids. Aaron Justice reported a trending slight rise in the conversion of alpha acids to iso-alpha acids when the boil pH was raised from 5.05 (~40% of aa's converted to iso-aa's) to 5.35 (~50% of aa's converted to iso-aa's). However, an Eppendorf BioSpectrometer using ASBC Wort-23 and ASBC Beer-23A was used to measure IBU'S, not isomerized alpha acids specifically (chromatography must be used to measure iso-alpha acids without measuring other bittering compounds) . Bastgen et al. (2019) found that at a boil pH of 5.6, the percentage of iso-alpha acids increased by 32% by extending the boil from 60 minutes to 120 minutes. However, there was no increase at all in iso-alpha acids when the boil pH was 7, but a pH of 7 is not typical in the brewing process . Time is thought to play a large role in isomerization, however, Justice reported that the majority of the IBU from iso-alpha acids in 60 minute additions and in whirlpool additions occurs within the first 10 minutes, with only a 12-30% increase after another 50 minutes of boiling/whirlpooling (higher gravity beers had more isomerization during the final 50 minutes while lower gravity beers had less isomerization during the final 50 minutes of boiling) . Blogger and "garage scientist", John Paul Hosom, who developed the so-called "SMPH Model for estimating IBU's, hypothesized that non-iso-alpha acid bittering compounds that impact spectrophotometer IBU measurements such as oxidized alpha acids are affected by wort pH, rather than the isomerization rate of alpha acids into iso-alpha acids .

See also:

• Brew Strong podcast; "Tackling the IBU" with Aaron Justice.

Oils

There are three primary classes of oils in hops: hydrocarbons (~64% of the total oils), oxygenated compounds (~35% of the total oils), and sulfur compounds (≤1% of the total oils). Individual flavor and aroma active oils each have different thresholds, solubilities, and volatilities, and individual oils can have synergistic interactions with each other. The chemistry of hop oil taste perception is therefore very complicated and overall is not well understood. For example, only recently it has been shown that the amount of hop oils does not correlate to hop aroma intensity when dry hopping, but the composition of hop oils does . While sulfur compounds make up only a very small fraction of the total oils, they have a significant impact on hop flavor .

Hydrocarbons, specifically terpenoids, make up the majority of hop oil. The majority of these terpenoids are myrcene, which characterizes the aroma of hops (although this compound does not carry over well into beer because it is hydrophobic), caryophyllene, and humulene. Most of these compounds are evaporated off by the brewing process, and others are metabolized into different compounds during fermentation . Linalool (citrus, floral, fruity, tropical ) and geraniol (rose-like, musty, floral ) have been identified as the major compounds that contribute to beer flavor in hop varieties such as Cascade .

Hop oil contains a small percentage (~1%) of sulfur related compounds (thiols, sulfides, polysulfides, thioesters, thiopenes, and terpene derivatives). Although these levels are low, the flavor thresholds for these compounds also tends to be very low. Hydrogen sulfide can be released from these compounds during fermentation. Hops that have been treated with sulfur to prevent mildew growth (an older process that is generally no longer used) can result in increased sulfur compound such as sulfuric terpenes, and lend a garlic-like aroma in beer. Few sulfur compounds survive boiling, however late hopping and dry hopping preserves more sulfur compounds which can survive into the beer. Fermentation generally volatilizes sulfur compounds, and some volatilize almost completely during fermentation .

Thioesters are derived from an acid and a thiol. These include S-methyl hexanethioate and S-methyl heptanethioate and derivatives of these, which impart cooked cabbage, sulfuric, and soapy flavors, and their low flavor threshold can have an impact on finished beer. Sulfides and polysulfides found in hops includes dimethyl sulfide (DMS), dimethyl disulfide (DMSD), dimethyl trisulfide (DMST; cooked vegetable, onion). DMTS has been found in wide ranges in hops, from a few ppm to 1450 ppm, and has a very low flavor threshold (1 ppb). These compounds are volatilized during brewing and fermentation, and are generally only found in beers that are dry hopped .

Other thiol (organic sulfur) based compounds contribute to a pleasant aroma and flavor in beer, such as 4-mercapto-4-methyl-pentan-2-one (4MMP), which is found in high quantities in North American varieties such as Simcoe (highest amount), Summit, Apollo, Topaz, and Cascade hops, as well as varieties from Australia and New Zealand. The character of black currant, muscat-like aroma in beer brewed with these hops has been attributed to 4MMP. It is thought that 4MMP is only found in North American, Australian, and New Zealand hops and not European hops because European hops are often treated with copper ions, which has been shown to decrease the amount of 4MMP in hops. Interestingly, beers brewed with these hops showed a 33% increase in 4MMP after fermentation; it is thought that the precursor cysteine conjugate is responsible for the increase in 4MMP during fermentation . The volatile thiols 3-sulfanyl-4-methylpentan-1-ol (3S4MP; grapefruit ), and 3-sulfanyl-4-methylpentyl acetate (3S4MPA; passionfruit, grapefruit ) have been identified in Nelson Sauvin hops as the compounds that give these hops their "wine-like, Sauvignon Blanc" character. Similar thiols have been described as the major contributors to the aroma of Sauvignon Blanc wines themselves: 3-sulfanylhexan-1-ol (3SH) and 4-methyl-4-sulfanyl-pentan-2-one (4MSP/4MMP) .

See also:

• "The Complex Case of Thiols", Craft Beer & Brewing.

Characterizing Hop Flavor and Aroma

Image created by Øystein Meiningen, based on "The Language of Hops: How to Assess Hop Flavor in Hops and Beer." Drexler et al. MBAA Technical Quarterly. Vol 54 2017. This file is permitted to be downloaded and used as a spider graph background.

Image created by Øystein Meiningen, based on "The Language of Hops: How to Assess Hop Flavor in Hops and Beer." Drexler et al. MBAA Technical Quarterly. Vol 54 2017. This file is permitted to be downloaded and used as a flavor wheel.

Hops provide a wide array of aromas and flavors to beer. These flavors and aromas are variety and crop dependent. Hop farmers often provide their own hop flavor and aroma descriptors independently of each other, but attempts to standardize these descriptors have been made as far back as 1756, and as recently as 1978. More recently, Drexler et al. (2017) worked with a perfumer to establish 12 major categories of hop flavor descriptors. Each major category contains more specific descriptors. These descriptors can be measured on a 0-10 scale, and a spider graph can be drawn to represent them. Drexler et al. (2017) proposed that even though expensive gas chromatography is available for hops which measures specific compounds, sensory analysis is still the best way to quantify how different varieties of hops actually smell and taste in beer .

The proposed categories, example hop variety, and the specific descriptors by Drexler et al. (2017) are as follows :

1. Floral (ex: Ella): Elderflower, Chamomile Blossom, Lily of the Valley, Jasmine, Apple Blossom, Rose, Geranium, Carnation, Lilac, Lavender
2. Citrus (ex: Mandarina Bavaria): Grapefruit, Orange, Lime, Lemon, Bergamot, Lemon Grass, Ginger, Tangerine
3. Sweet Fruits (ex: Mosaic®): Banana, Watermelon, Honeydew Melon, Peach, Apricot, Passion Fruit, Lychee, Dried Fruit Plum, Pineapple, Cherry, Kiwi, Mango, Guava
4. Green Fruits (ex: Hallertau Blanc): Pear, Quince, Apple, Gooseberry, White Wine Grapes
5. Red Berries (ex: Monroe): Cassis (Black Currant), Red Currant, Blueberries, Raspberries, Blackberries, Strawberries, Wild Strawberries, Cranberries
6. Cream Caramel (ex: Triskel): Butter, Chocolate, Yoghurt, Honey, Cream, Caramel, Toffee, Coffee, Vanilla, Tonka
7. Woody Aromatic (ex: Relax): Tobacco, Cognac, Barrique, Leather, Woodruff, Incense, Myrrh, Resin, Earthy, Cedar, Pine
8. Menthol (ex: Polaris): Mint, Lemon Balm, Camphor, Menthol, Wine Yeast
9. Herbal (ex: Columbus): Lovage, Thuja, Basil, Parsley, Tarragon, Dill, Fennel, Thyme, Rosemary, Marjoram, Green Tea, Black Tea, Mate Tea, Sage
10. Spicy (ex: Saazer): Pepper, Chili, Curry, Juniper, Aniseed, Nutmeg, Liqorice, Clove, Ginger Bread, Fennel Seeds
11. Grassy-Hay (ex: Herkules): Green-Grassy, Fresh Cut Grass, Hay, Tomato Leaves, Green Peppers, Nettle
12. Vegetal (ex: Summit®): Celery Stock, Celery Root, Leek, Onion, Artichoke, Garlic, Wild Garlic

See also:

• "Influence of Hops and Yeast", Alicia Muñoz Insa presentation at the 2015 Belgian Brewing Conference.
• MBAA Podcast interviews Georg Drexler about his study.
• Experimental Brewing Podcast talks about the Drexler et al. study (starts at ~36 minutes in).
• YCH hop variety database.
• Brulosophy's "The Hop Chronicles", an attempt to characterize hop flavor and aroma.
• Hopsteiner presentation on specific blends of hops that match the flavor profile of another hop.

International Bitterness Unit

Beer bitterness is often described in terms of International Bitterness Units (IBU), or more accurately, Bitterness Units (BU). The European Brewery Convention has adopted the “E.B.C. Bitterness Units,” determined in a similar way and recently updated for dry hopped beers to account for humulinones, as a uniform method that best expresses the true bitter flavor value of beer . These measurements seek to measure the amount of iso-alpha acids, which contribute the majority of bitterness to beer. There are, however, other compounds that contribute to bitterness, such as oxidized alpha and beta acids (see Aged Hops below). These methods include using spectrophotometry, High-Performance Liquid Chromatography-Ultraviolet (HPLC-UV), and liquid chromatography–mass spectroscopy (LC–MS). The ASBC describes these methods in depth on their website (see method 23; requires membership to read). While many brewers argue that the IBU measurement is not that helpful for communicating bitterness to consumers, it is generally agreed upon that IBU measurements are very useful to brewers who are seeking consistency in their products .

Compounds other than iso-alpha acids present several challenges to traditional methods of measuring BU's. Many hop compounds other than iso-alpha acids that have varying levels of perceived bitterness are detected at the same wavelength as iso-alpha acids using spectrophotometry. In addition, oxidized alpha acids are known to contribute to bitterness. As a result, updated methods of using High-Performance Liquid Chromatography-Ultraviolet (HPLC-UV) and liquid chromatography–mass spectroscopy (LC–MS) are generally recommended for measuring bitterness units in dry hopped beers (although models that account for bitterness contribution from compounds other than iso-alpha acids have not yet been completed). In addition to these challenges, iso-alpha acids and other hop compounds that contribute to bitterness degrade over time, thus the perceived bitterness of beer tends to become weaker as beer ages .

Measuring BU's directly requires costly laboratory equipment, and so researchers and enthusiasts have made some progress in creating models that attempt to estimate bitterness units. These models are generally based off of boil time, alpha acid percent of the hops used, weight of the hops used, post-boil volume of wort, and gravity of the wort. These include the Tinseth model, the Garetz model, and the Rager model. These models are often used in brewing software, such as BeerSmith™ and Brewer's Friend. Another model called the 'SMPH' model has been proposed by John Paul Hosom as potential updated model that addresses their limitations in regard to newer hopping techniques such as whirlpool hopping and dry hopping, as well as accounting for IBU's from non-iso-alpha acid compounds Other limitations include differences in brewhouse size and efficiencies. For example, the Tinseth model was developed on a homebrew system using whole leaf hops (see the Experimental Brewing podcast interview with Glenn Tinseth link below).

See also:

• "Dry Hopping Effect on Bitterness and IBU Testing" by Scott Janish.
• Experimental Brewing interview with Glenn Tinseth (52 minutes in).
• "Last Call for IBUs: Fact, Fiction and Their Impact on Your Beer," by Chris McClellan.
• The Brü Lab Podcast Episode 076 | A Modern Method For Predicting IBU w/ John Paul Hosom

Antimicrobial Properties

Hops are known to have antimicrobial properties against Gram-positive bacteria. This includes bacteria that can be present in beer both as spoilage organisms and as intentionally added in sour and mixed fermentation beer such as Lactobacillus and Pediococcus. Gram-negative bacteria found in beer, such as Acetobacteraciae, and are not susceptible to the antimicrobial properties of hops . Certain Gram-positive bacteria strains that have adapted to the brewing environment, such as some strains of Lactobacillus brevis and L. paracasei , are known to be more resistant to the antimicrobial effects of hops. The antimicrobial effect is characterized as inhibiting the growth and lactic acid production of lactic acid bacteria, however, this does not always also include cell death as Lactobacillus that has been inhibited by hops can later be revived . The effectiveness of hops to inhibit Gram-positive bacteria is also dependent on pH; at a lower pH, hops have a greater effect on inhibiting bacteria . Hop extracts have also been demonstrated to be antimicrobial, with colupulone and lupulone being suggested as the strongest inhibitors .

Multiple mechanisms have been proposed to explain why hops are antimicrobially active. One mechanism of the antimicrobial activity of hops is due to the role of iso-alpha alpha acids and possibly similar hop acids (such beta acids and oxidized hop acids) as ionophores, or compounds which can transport ions across cell membranes. While their antimicrobial properties are strong, alpha and beta acids in beer and wort and their effects on brewing are generally disregarded because they do not solubilize . The protonated iso-α-acid (the form of the acid with an associated H+ ion, an H+ ion is a proton) is the antimicrobially active form. This means that for a beer with a given iso-α-acid concentration, the antimicrobial effects will be stronger at lower pH values because a greater percentage of the acid will be protonated. Protonated iso-α-acids act against bacteria by crossing into the cell and dissociating (releasing H+ ions from the iso-α-acid and decreasing the pH within the cell ), therefore disrupting the cellular proton gradient which is necessary for cells to function, before binding an equal charge in metal ions and crossing back out of the cell. Cells with resistance to hop bitter acids are better able to eject disassociated iso-α-acids from the cell and therefore preserve their proton gradients. The mechanism to expel iso-α-acids appears to be specific toward this type of compound rather than by a more general antimicrobial resistance mechanism such as multi-drug resistant bacteria possess . The anti-microbial power of iso-α-acids is pH dependent. At a higher pH (5.6) iso-α-acids begin to lose their anti-microbial properties, but at a typical beer pH (4.3) iso-α-acids inhibited a sample of 6 strains of L. brevis that exhibited a range of general hop tolerance in one study . Hop resistant bacteria cultured in the absence of hop acids can lose their resistance if grown in an environment without antibacterial hop compounds and some hop resistant microbes need to be acclimated to hop acids by growth in sub-limiting levels of antibacterial acids before they are able to resist higher levels .

Another antimicrobial mechanism resulting from oxidative stress has been attributed to both iso-α-acids and humulinic acids . Humulinic acids are either not bitter tasting or much less bitter than iso-α-acids but are similar in structure to and are formed from the degradation of iso-α-acids as well as during the aging of hops . Humulinic acids consist of the "cis-" and" trans-" forms of humulinic acid, cohumulinic acid and adhumulinic acid . This oxidative stress-driven antimicrobial activity is due to the potential for oxidation-reduction (redox) reactions within bacterial cells between Mn2+ ions and these specific hop acids. The redox potential is due to different conditions inside (higher pH, higher Mn2+) and outside (lower pH, lower Mn2+) of the bacterial cell . Iso-α-acids or humulinic acids passing into the cell, form complexes with Mn2+ and transfer electrons out of the cell . By targeted molecular modifications Schurr et al. (2015) determined that the Mn oxidative stress-driven antimicrobial effect of iso-α-acids was more important than the antimicrobial effect of the ionophore proton transfer discussed above in the overall antimicrobial activity of hops. Thus, the antimicrobial effects of humulinic acids have been found to be even stronger than iso-alpha acids, suggesting that aged hops retain at least some antimicrobial properties at least partially from humulinic acids . One study found that adding Mn2+ to a lager beer minimized this effect and slightly increased the cell count of 6 strains of L. brevis that had a range of hop tolerances .

The oxidized forms of hop acids have been shown to have a limited inhibitory effect on Gram-positive bacteria. This might explain the anecdotal experiences of some brewers that have tried using aged hops that were high alpha varieties and produced beer that wasn't sour. Stevens et al. (1961) reported that a strain of Lactobacillus that was cultured from infected beer was inhibited by alpha acids at 40 ppm, beta acids at 10 ppm, iso-alpha acids at 160 ppm, and oxidized beta acids (cohulupone) at 200 ppm. So, while the oxidized beta acids had the least inhibitory power, a high concentration was still inhibitory . Oxidized alpha acids (humulinones) have only been tested for antibacterial properties at a concentration of 50 ppm or less. At 50 ppm, oxidized alpha acids were not able to inhibit two strains of Lactobacillus that were isolated from infected beer, as reported by Hough et al. (1957) . See oxidized hop acids for more information on oxidized hop acids.

Dry hopping has also been demonstrated to inhibit lactic acid bacteria. See Dry Hopping below.

See also:

• Lactobacillus hop tolerance
• Pediococcus hop tolerance

Bacterial Resistance to Hop Compounds

Due to the multiple mechanisms for hop antimicrobial activity, multiple resistance mechanisms are necessary for a Gram-positive bacterial cell to successfully be hop-tolerant. Hop resistance of bacteria will vary by species as well as within a species with individual strains. The environment in which strains are cultured and maintained may also influence their hop tolerance. It is possible for a small subpopulation of individual cells that have a higher tolerance to hops to eventually dominate the overall population . The hop tolerance of lactic acid bacteria strains decreases when they are cultured in hop-free environments and strains cultured in media with increasing concentrations of hop compounds show an increase in hop tolerance. The stability of hop resistance, or the rate at which it is lost when bacteria are cultured in unhopped wort, varies by strain. It can take up to 1 year for maximum loss of hop resistance, suggesting that in some strains have a relatively stable hop resistance. Because of this intra-species variability and dependence on how the strains were cultured, it is difficult to give specific advice about the hop-tolerance of a wide range of strains offered from different sources. As a general rule, some common lactic acid bacteria species used in sour beer and found as beer spoilage organisms like Lactobacillus brevis, Lactobacillus lindneri and Pediococcus delbrueckii have some resistance to hops. Brewers seeking to make acidic beers with higher doses of hops may wish to seek out one of these species. Some hop-tolerant species benefit from pre-culturing in media with below-limiting concentrations of compounds before being used in more highly hopped wort or beer.

See also Pediococcus hop resistance and Lactobacillus hop tolerance.

Hop Derived Compounds In Beer and Biotransformations

An overview of the biotransformation reactions occurring in certain yeast with the required genetic/enzymatic capability. Abbreviations: 3MH 3-mercaptohexanol, 3MHA 3-mercaptohexyl acetate, Cys cysteine, GSH glutathione, TPA terpene alcohol. Credit: Henrik Svedlund. Source: Svedlund, N., Evering, S., Gibson, B. et al. Fruits of their labour: biotransformation reactions of yeasts during brewery fermentation. Appl Microbiol Biotechnol 106, 4929–4944 (2022). https://doi.org/10.1007/s00253-022-12068-w

The flavor and aroma compounds found in leaf/pellet hops are different than the hop-derived flavor and aroma compounds found in finished beer (other than in the case of dry hopping). The brewing process (particularly boiling), and fermentation greatly affect the composition of flavor and aroma compounds that are found in beer. For example, boiling wort and hops isomerizes non-bitter alpha acids into bitter iso-alpha acids. During the boiling of the wort, many compounds found in hops are evaporated, such as many of the various sulfur compounds found in hops. The terpene hydrocarbons which make up most of the hop oil content in hops (myrecene, humulene, and caryophyllene) are completely removed by fermentation. It is believed that these terpene hydrocarbons stick to the yeast cells and fall out of solution during fermentation .

A "biotransformation" is any change in a chemical's structure that is initiated by a living organism . It has been hypothesized that biotransformations of some kind are taking place in beer during fermentation and explain changes to hop compounds during fermentation and beer storage. Some carbonyl compounds found in hops (citral, geranial, nerol, citronellal, and methyl ketones) can be used as a food source by yeast during fermentation. Cyclic ethers such as linalool oxides, karahana ether, hop ether, and rose oxide (aroma of roses ), increase after fermentation and have been identified as secondary metabolites produced by yeast during metabolism from hop derived precursors. Esters found in hops can be converted into ethyl esters by yeast during fermentation; for example, geranyl esters found in Cascade hops can be hydrolyzed into geraniol (flowery). The terpenoid citronellol (citrus and floral ) can be esterified by yeast fermentation into citronellyl acetate (fresh, rosy, fruity odor reminiscent of geranium oil ). Yeast strains differ in their ability to convert these compounds. For example, one study found that lager yeast was able to form acetate esters of geraniol and citronellol, but ale yeast was not .

In addition to biochemical changes to hop compounds, yeast derived flavor compounds that are independent of hops such as esters and phenols can affect the overall sensory characteristics of hop compounds in beer. Therefore, different strains of yeast can greatly impact the overall organoleptic experience of hop flavors and aromas in finished beers .

Terpenes

Terpenes and terpenoids (monoterpene alcohols) can also be transformed by fermentation. Studies have found that geraniol and nerol can transform into linalool by a strain of S. cerevisiae, as well as nerol and linalool into alpha-terpineol, which can then be further transformed to terpin. Geraniol can also be converted into citronellol, and the content of geraniol and citronellol can be increased in finished beer by increasing the initial content of geraniol, which is found in higher quantities in some varieties of hops (Citra, for example). Linalool, nerol, and alpha-terpineol gradually decrease during fermentation and aging (perhaps being transformed into ethers, which is a class of organic compound that contains an oxygen atom connected to two alkyl or aryl groups), while nerol and citronellol gradually increase. Geraniol also decreases during fermentation, but not as drastically as linalool. It has been hypothesized that the bioconversion of geraniol into citronellol could be by means of glycosidic activity (although evidence for glycosidic activity in S. cerevisiae in regards to hop derived compounds is very weak; see Hop Glycosides). Post-fermentation dry hopping preserves linalool and alpha-terpineol, and limits citronellol to trace levels .

Takoi et al. (2012) used Citra hops with a high content of geraniol added late in the boil, and reported a steep decline on geraniol during the first three days of fermentation with a lager yeast strain. Linalool had a gradual decline but ended up at higher levels than geraniol in the finished beer. Citronellol had a sharp increase during the first three days of fermentation and then remained at a stable level until the end of fermentation. However, after storing the beer at 15°C (59°F) for 1 week, the amount of citronellol more than doubled. This indicated that active fermentation may not be required for the transformation of geraniol into citronellol (the yeast was filtered before packaging the finished beer, after a storage time of 6-8 days at 13–15°C and then at 0°C for 2–3 weeks). The enzyme NADPH dehydrogenase 2, encoded by the OYE₂ gene in some yeast strains, was proposed as the mechanism for this transformation. Interestingly, Takoi et al. (2012) also showed that coriander seeds, which also have high levels of linalool and geraniol, have a nearly exact same effect on beer, with a beer made with 0.5 g/L of coriander seed resulting in 20 ppb of citronellol and a beer made with 0.75 g/L of coriander seed resulting in 30 ppb of citronellol. The Citra beer had a citrus and "green" aroma, while the coriander beers had a very floral aroma with a slight citrus impression. They also conducted a sensory experiment with different levels of geraniol and citronellol added to linalool to see if small amounts of these would affect the flavor of a large dosage of linalool, and the results confirmed that small increases of geraniol and citronellol increased flowery and fruity flavors even in the presence of high dosages of linalool . The data for the Citra beer is shown below:

Takoi et al. (2014) continued their research into monoterpene biotransformations. They determined that some varieties of hops have higher concentrations of geraniol (floral flavor) than others, which when used in beer, can lead to higher citronellol levels (citrus flavor) in beer that wasn't present in the hops or wort. They found that while traditional German hops such as Saaz and New Zealand hops contain very little geraniol, American hops such as Bravo, Citra, Cascade, Mt. Hood, Mosaic, Chinook, Apollo, Amarillo, and others contain relatively large amounts of geraniol, with significant variations from different crop years. In this study, they measured the amount of linalool, geraniol, and citronellol in beers that were dry hopped at different time points: before yeast was added (labeled "pre-yeast" in the table below, and represents something similar to whirlpool hop additions), 3 days after yeast was added, and at the end of fermentation. For each of these timings, they tested three different hop varieties that contained high levels of geraniol: Cascade, Bravo, and Mosaic. Overall, the amount of linalool in the finished beers wasn't affected by the timing of the dry hop. The amount of citronellol was also not affected by the timing of the dry hop except for the Bravo hops where the post-fermentation hopping resulted in about half the amount of citronellol than it did for the pre-fermentation and 3-day fermentation dry hop timings (see the bar graph based on the data from Takoi et al. 2014 below). The timing of the dry hop had the largest effect on geraniol: the earlier the dry hop, the less geraniol was present in the finished beer for all three hop varieties, with hops added pre-fermentation producing the lowest amount of geraniol and hops added post-fermentation producing the most geraniol in the finished beers. As in their previous study, citronellol increased during the first three days of fermentation, remained relatively stable for the rest of fermentation, and then increased again during storage. Geraniol dropped significantly during the first three days of fermentation in the case of the pre-yeast and 3-day dry hop timing and increased slightly during storage. This data indicates that while earlier dry hopping reduces geraniol, only certain varieties of hops have an increase in citronellol depending on the dry hop timing. It's been suggested that the transformation of geraniol to citronellol involves unknown mechanisms that are relatively complex, particularly because the rate of the disappearance of geraniol does not map onto the rate of increase in citronellol, and when post-fermentation dry hopping there is a high amount of free geraniol but not a corresponding increase in citronellol during storage .

See also this table which shows the higher geraniol levels from post-fermentation dry hopping (labeled "Timing 1") versus lower geraniol levels from pre-yeast (labeled "Timing 2") and 3-day fermentation dry hopping (labeled "Timing 3").

Other yeast species can also convert monoterpenes. For example, a strain of Kluyveromyces lactis was found to reduce geraniol to citronellol. This strain and a strain of Torulaspora delbrueckii produced linalool from both geraniol and nerol, and could also form geraniol from nerol . Many species of Debaryomyces, Kluyveromyces, and Pichia were found to transform geraniol into linalool, and nerol into linalool and alpha-terpineol . Colomer et al. (2020) measured the monoterpenes in two experiments before and after inoculating with different strains of Brettanomyces that had varying degrees of beta-glucosidase activity. They found that the strains with the least beta-glucosidase activity had the least impact on biotransformation, but the increase in beta-citronellol was higher than what has been reported in biotransformation studies with Saccharomyces . See Brettanomyces hop biotransformation for more information.

In general, different yeast strains have a large impact on how hops are perceived in the final beer, including both perceived bitterness and flavors. For example, POF+ (phenolic positive) strains of Saccharomyces cerevisiae tends to mask the hop-derived aromas in dry hopped beers . A beer hopped with the Tradition hop variety produced fruit flavors when fermented with Abbaye ale yeast, and woody/spicy flavors when fermented with US-05. When the beer was brewed with Citra hops, with US-05 the beer had sweet fruits/citrus flavors and more bitterness, but when fermented with the Abbaye ale strain the beer had a more one dimensional sweet fruit/floral flavor and less bitterness .

See also:

• Escarpment Labs presentation by Richard Preiss on biotransformation.
• MBAA Podcast #282: New Belgium's tests with mid-fermentation dry hopping.

Glycosides

In addition to terpenes and monoterpene alcohols being found in hops in a free form, they are also present in the form of glycosides, which are flavor compounds that are bound to a sugar molecule. Plants use glycosides for a range of metabolic purposes. The amounts and types of glycosides in hops varies by hop variety, and can be affected by plant fertilization and harvest timing . In their bound form, glycosides are flavorless. Studies on hop compounds elude to the possibility of compounds being produced by the glycosidic activity of S. cerevisiae, however direct evidence of glucosidic activity in S. cerevisiae is lacking. Daenen (2008) reviewed the glycosidic activity of many strains of S. cerevisiae, and found that only a few strains expressed any real glucosidic activity and none that exhibited exo-beta-glucosidase which would be required to break glycosidic bonds in the beer/wort. Daenen did find that enzymatic activity from some strains of Brettanomyces can efficiently release these bound compounds and release their flavor and aromatic potential . Beta-glucosidase enzyme can also be added to beer to enhance the breakdown of glycosides and intensify hop-derived flavors and aromas. For example, one study showed an increase in citrus, orange, grapefruit, and tropical pineapple in a Cascade dry hopped beer that had beta-glucosidase enzymes added to it . There is also some evidence to support that there is higher glucosidase activity in seeded hops, which are generally not used in the brewing industry . Hops also contain polyhenols that are bound in glycosidic form that could contribute a small amount of bitterness (see also Bru Lab Podcast Episode 055; Hop Bitterness And Polyphenols w/ Dr. Martin Biendl).

The effects of beta-glucosidase on hops may be limited even in ideal conditions using pure beta-glucosidase that is highly efficient in beer where beta-glucosidase activity by yeast is limited. Sharp et al. (2017) determined that hops contain such a small amount of glycosides that their release doesn't contribute much to hop flavor and aroma. While previous studies focused on hop extracts, they studied glycosides in whole leaf hops for the first time and found non-significant levels of hop-derived monoterpenes from glycosides even when using pure beta-glucosidase extracted from almonds. For example, linalool was increased by 16.5 μg/L when using the highest hopping rate, but this amount has little impact on the overall aroma and flavor of the beer. The terpenes citronellol, terpineol, nerol, and geraniol were also not increased in significant amounts, however, the fatty alcohol 1-octanol (waxy, green, citrus, orange, aldehydic, fruity ) was increased significantly . The alcohol octanol can be esterified into octyl acetate, which is a classically "citrusy" aroma, so perhaps certain yeasts can create this ester during mid-fermentation hopping .

See Glycosides for more information on glycosides.

Thiols

Sulfur-based compounds bound to a hydrogen atom known as thiols have also been shown to be produced by yeast fermentation from the hop derived precursors cysteine or glutathione via yeast β-lyase activity. This β-lyase activity is expressed by strains of Saccharomyces cerevisiae that have the IRC7 gene. This activity takes place within the yeast cells which uptake the bound thiol precursors and then expel the free thiols. Most industrial brewing and wine strains of S. cerevisiae do not have a functional version of this gene due to a lack of selective pressure. Even in strains with a functional version of the IRC7 gene, the expression of the gene is repressed in nitrogen rich substrates such as wort (~4 mins in). The cysteine and glutathione precursors are also found in malt, hops, certain varieties of wine grapes (Sauvignon blanc, Gewürztraminer, Semillon, Chardonnay and Riesling grapes), and rice, with levels varying greatly depending on varieties of the plants. In addition to some strains of Saccharomyces cerevisiae that express the genes to produce thiols, strains of the yeasts Metschnikowia pulcherrima, Torulaspora delbrueckii, Lachancea thermotolerans, Candida zemplinina, and the bacteria Lactobacillus plantarum have also been found to produce thiols . So far, science has found that these include the volatile thiols:

• Grape and hop based thiols:
  • 3-mercaptohexan-1-ol (3MH; also referred to as 3-sulfanylhexan-1-ol, 3SH; tropical fruit)
  • 4-mercapto-4-methylpentan-2-one (4MMP; also referred to as 4-methyl-4-sulfanylpentan-2-one, 4MSP; blackcurrant)
• Hop based thiols (Nelson Sauvin hops):
  • 3-sulfanyl-4-methylpentan-1-ol (3S4MP; grapefruit)
  • 3-mercaptopentanol (3MP; also referred to as 3-sulfanylpentan-1-ol, 3SP)

Acetylation (acetate) variations:

• 3-sulfanyl-4-methylpentyl acetate (3S4MPA; passionfruit, grapefruit)
• 3-mercaptohexyl acetate (3MHA; passionfruit)

Typically, in beer and wine, the amount of free thiols that are formed from these precursors is less than 1%, perhaps due to poor activity of β-lyase activity in acidic media and inhibition by polyphenols. However, these thiols were found in beers dry hopped separately with Amarillo, Hallertau Blanc, and Mosaic hop varieties. The amounts of these two thiols were higher than expected based on the content of these thiols in the hops alone . Dry hopping temperature plays a role, with with 18-24°C being optimum for 3Mh and 3MP, and 28°C being optimum for 3S4MP. Mash hopping can potentially increase thiols, while using copper in the brewing or winemaking process can reduce them . In order to get around the nitrogen caused suppression of the IRC7 gene in brewing yeast, Omega Yeast Labs has bioengineered a yeast strain called Cosmic Punch™ (British V OYL-011) to produce significant amounts of thiols from hops and malted grains. Berkeley Yeast also offers bioengineered yeast strains that produce thiols. See also this MTF thread speculating on how Brettanomyces might produce thiols.

See also:

• "Thiols" articles on Top Crop from Omega Labs.
• "The Locksmith: Utilizing Bioengineered Yeast and High Bound Thiol Precersour Hops and Phantasm Powder to Thiol Drive Beer," by Scott Janish.
• "Thiol-Driver," by Scott Janish.
• Charles Faram Blog; Introduction to Thiols in Hop Oils.
• IRC7 + CRISPR = Cosmic Punch - MBAA podcast with Dr. Laura Burns and Lance Shaner from Omega Yeast.
• False Bottom Girls podcast interview with Dr. Laura Burns from Omega Yeast.
• MBAA Podcast Episode 268 Free Thiol Release with Cécile Chenot.
• Practical advice from Michael Tonsmeire on The Mad Fermentationist blog.
• Craft Beer & Brewing Magazine interview with New Zealand hop breeder Ron Beatson.

Lightstruck

See Aging and Storage.

Aged Hops

Aging hops leads to oxidation of acids and oils. Generally, brewers seek to avoid this to preserve the aromatic and bittering properties of their hops by freezing them and storing them in vacuum sealed packaging (oxygen exposure is by far the larger factor for hop degradation, followed by ambient room temperatures, which is significant because hops are often not stored in vacuum sealed packaging). However, some beer styles, including lambic and historical styles, make extensive use of aged hops. Aged hops still retain some antimicrobial properties at least partially from the formation of humulinic acids (see Antimicrobial Properties of Hops), and they can be used for microbial inhibition. In addition to their antimicrobial activity, aged hops contribute important flavor and aroma compounds and precursors to beer, while not contributing much of a strong bitterness from iso-alpha acids. These flavor descriptors often include herbal, tea-like, Earth-like, and a more dull bitterness. Low amounts of Isovaleric Acid might also contribute to the complexity of a beer that has been brewed with aged hops (although the presence of isovaleric acid in aged hops is considered temporary, and will eventually age out of hops that are aged). Historically, some brewers had issues keeping mildew from growing on aged hops that are aged in higher humidity areas (sulfur was used to combat mildew, which often gave the beer a sulfur, rotten egg aroma) .

In lambic brewing, the term aged hops refers to hops (usually Noble varieties such as Tettnang, Saaz, Target, and Hallertau) which have been aged for 3-5 years in non-refrigerated conditions, and in burlap sacks or some other oxygen permeable bag . It should be noted that the term "aged hops" can also refer to any sort of hop aging (especially in scientific literature), including short-term hop aging (1-6 months, for example) at refrigerated or non-refrigerated temperatures, and in oxygen-rich or vacuum sealed packaging. Much of the information below references hops that have been aged in warm conditions for shorter time periods than what hops are aged for in lambic brewing. The additional aging of hops that are used in lambic brewing or similar beers might have different effects than what has been studied in hops that are aged for shorter periods of time.

For techniques and usage amounts of aged hops, see Aged Hops in Lambic.

Aging Hops

Typically, only low alpha acid hops are used (high alpha acid hops may lead to more hop character and higher inhibition of lactic acid bacteria than desired possibly due to oxidized acids). The hops are typically bound in burlap sacks/paper bags or something similar that allows for exposure to oxygen, and then they are left to age in preferably low humidity conditions at room temperatures to warm temperatures (warmer temperatures will encourage faster aging). Changes in the environment such as temperature shifts are not a concern; for example Jester King Brewery in Austin Texas ages hops in a horse barn. The hops should are traditionally aged for 2+ years. Monitor for mold growth during this time, and discard any hops that show visible signs of mold growth. Some brewers prefer to age the hops until the cheesy character (Isovaleric Acid) is gone, while other brewers do not mind the presence of this cheesy character (for example, some lambic beers display isovaleric acid character even after packaging). While hop leaves are generally preferred over pelletized hops, if aging pellets, it has been advised to break the pellets up so that the entirety of the hop material is exposed to the air.

Freshly harvested hops (also called "wet hops") should not be aged. Freshly harvested hops should be dried first, as is normal for hop processing, before aging in order to prevent mold growth (see this article from Michigan State University on measuring moisture levels and this AHA article on drying hops for home growers and this MBAA podcast interview with Val Peacock on industrial hop drying).

See also:

• Joshua Martinez MTF thread on using a rotary composter to pulverize pellet hops for aging.
• MTF thread on general tips on aging hops.

Chemistry and Characteristics

During aging and if exposed to oxygen, compounds in hops oxidize into different compounds known collectively as "oxidative polar compounds" or OPC's. Hao et al. (2020) reported 39 different OPC's in aged hops, with 15 of them derived from alpha acids, 15 derived from isomerized alpha acids, and 9 from beta-acids . Many of these oxidation derived compounds are considered "hard resins" (meaning they are soluable in alcohol) and contribute bitterness and antimicrobial properties to beer. Examples of "soft resins", which are not soluable in alcohol, are alpha and beta acids .

Summary of Oxidized Hop Acids

Alpha Acid Derived Compounds
Oxidized Compound	Precursor	Beer Soluble (Y/N/?)	Bitterness Level	Notes
Humulinones (cohumulinone, n-humulinone, and adhumulinone)	Alpha acids (cohumulone, humulone, and adhumulone)	Y	66% as bitter as iso-alpha-acids	In hops, alpha-acids are degraded to humulinones in the presence of air, with higher temperatures leading to more rapid conversion.
tricyclooxyisohumulones A and B, deisopropyltricycloisohumulone, and tricycloperoxyisohumulone A	Alpha acids	?	?	Along with humulinones and 4'-hydroxy-allohumulinones, they are considered aging indicators of of hop oxidation.
Abeo-isohumulone	Humulinone	?	Not reported; might contribute to bitterness of beers with high amounts of aged hops.	Derived from the oxidation of humulinone in hops. Found in naturally aged Saaz and Nugget hops over a long period of storage.
4'-hydroxy-allohumulinones	Humulinones	?	Not reported; might contribute to bitterness of beers with high amounts of aged hops.	Believed to be derived from the oxidation of humulinone in hops. They are more stable than humulinone over time and are thus thought to be useful indicators of the degree of oxidation in hops.
4'-Hydroxyallo-cis-humulinones and cis-oxyhumulinic acids	4'-hydroxy-allohumulinones	Y	Contributes to bitterness quality	These are formed during boiling where 4'-hydroxy-allohumulinones are isomerized into 4'-Hydroxyallo-cis-humulinones for the first 60 minutes of boiling, and then the 4'-Hydroxyallo-cis-humulinones are slowly degraded into cis-oxyhumulinic acids after 60 minutes of boiling. After 120 minutes of boiling, 40-50% of the 4'-hydroxy-allohumulinones is transformed into 4'-Hydroxyallo-cis-humulinones and cis-oxyhumulinic acids. These are thought to effect the bitterness quality of beer, and as hard resins they could help improve head retention .
Scorpiohumulinols A/B and dicyclohumulinols A/B	4'-hydroxy-allohumulinones	?	?	Potentially makes up the majority (70%) of compounds derived from the degradation of 4'-Hydroxyallo-cis-humulinones in beer stored at 40°C over 12 weeks.
Beta Acid Derived Compounds
Oxidized Compound	Precursor	Beer Soluble (Y/N/?)	Bitterness Level	Notes
Hulupones (cohulupone, hulupone)	Beta acids (colupulone, lupulone)	Y	84% as bitter as iso-alpha-acids (short-lasting alpha-acid-like bitterness); colupulone has a flavor threshold of 7.9 umol/L	Degradation rate of beta acids into hulupones increases with temperature. Has a relatively low absorption in wort (4.8–10.4%). May also degrade into other unknown compounds other than hulupinic acids.
Hulupinic Acids	Hulupones	Y	Contributes marginal bitterness to beer; flavor threshold of 69 umol/L	Has a relatively low degradation in wort.
Tricyclocolupone epimers A/B	Beta acids (colupulone)	Y	Contributes long-lasting lingering and harsh bitterness; flavor threshold of 38-54 umol/L	Found to survive the brewing process up to 50% in a Pilsner style beer.
Dehydrotricyclocolupones epimers A/B	Beta acids (colupulone)	Y	Contributes long-lasting lingering and harsh bitterness; flavor threshold of 40 umol/L	Found to not survive the brewing process in a Pilsner style beer, so it might not contribute to beer bitterness.
Hydroperoxy-tricyclocolupone epimers A/B	Beta acids (colupulone)	Y	Contributes long-lasting lingering and harsh bitterness; flavor threshold of 20 umol/L	Found to not survive the brewing process in a Pilsner style beer, so it might not contribute to beer bitterness.
Hydroxy-tricyclocolupone epimers A/B	Beta acids (colupulone)	Y	Contributes long-lasting lingering and harsh bitterness; flavor threshold of 14-17 umol/L	Found to not survive the brewing process in a Pilsner style beer, so it might not contribute to beer bitterness.
Nortricyclocolupone	Beta acids (colupulone)	Y	Contributes bitterness; flavor threshold of 90 umol/L	Found to survive the brewing process.
Epoxycohulupone and Epoxyhulupon	Beta acids (colupulone, lupulone)	?	?	Newly discovered; not much is known about them.
Iso-Alpha Acid Derived Compounds
Oxidized Compound	Precursor	Beer Soluble (Y/N/?)	Bitterness Level	Notes
cis-alloisohumulone and trans-alloisohumulone	Iso-alpha acids (cis-isohumulone and trans-isohumulone)	Y	?	cis-alloisohumulone was found in trace levels in a Pilsner style beer at all different aging points, but trans-alloisohumulone remained undetected.
trans-humulinic acid and cis-humulinic acid	Iso-alpha acids (cis-isohumulone and trans-isohumulone)	Y	No bitterness	Minor levels in wort, but stable through the brewing process. Higher levels were detected in beers aged in oxygen permeable PET bottles versus glass bottles. Humulinic acid content increases over the storage of beer over many years as iso-alpha acids decrease. It has been suggested that the decomposition of iso-alpha acids into humulinic acids over time plays a role in the decrease in perceived bitterness of aged beer.
Hydroperoxy-cis-alloisohumulones and Hydroperoxy-trans-alloisohumulones	Iso-alpha acids (cis-isohumulone and trans-isohumulone)	Y	?	Iso-alpha acids degrade into these in beer that is exposed to oxygen after just 1-2 hours. Cis-isohumulone degrade into hydroperoxy-cis-alloisohumulones, while trans-isohumulone degrade into Hydroperoxy-trans-alloisohumulones and tricyclohumol. They are also formed during the wort boiling process, but are reduced by 50% during the fermentation process. Hydroperoxy-trans-alloisocohumulone increases as beer is stored in bottles over many years (1, 4, and 10 years were measured in one study), while hydroperoxy-cis-alloisocohumulone is less stable and decreases. In PET bottles, both types of hydroperoxy-alloisohumulones decreased to zero after 4 years of storage at room temperature. While the degredation of iso-alpha acids into hydroperoxy-alloisohumulones occurs very quickly when in the presence of oxygen, the degradation of hydroperoxy-alloisohumulones occurs much more slowly during storage at room temperature.
Hydroxyl-cis-alloisohumulones and Hydroxyl-trans-alloisohumulones	Hydroperoxy-cis-alloisohumulones and Hydroperoxy-trans-alloisohumulones	Y	?	Hydroperoxy-alloisohumulones are further degraded into their respective hydroxyl-alloisohumulones (cis and trans) via metal ions or UV light. Similar to hydroperoxy-alloisohumulones, hydroxyl-trans-alloisohumulones slowly increase during storage of bottles at room temperature over many years (1, 4, and 10 years), while hydroxyl-cis-alloisohumulones slowly decrease. In PET bottles, both types degrade to nearly 0 (from 0.39 umol/L to 0.08 umol/L) after 4 years at room temperature. When beer is intentionally oxidized, the hydroperoxy-alloisohumulones degrade very quickly over 24 hours into their hydroxyl-alloisohumulones derivatives.
Tricyclohumulactol	Hydroperoxy-alloisohumulones	Y	?	Only detected in a model solution; not detected in fresh or aged beer possibly due to low concentrations and/or coelution with isobaric molecules, exposing a technical difficulty of detecting these compounds in beer.
Scorpiohumols	Hydroxyl-trans-alloisohumulone	Y	?	Same as Tricyclohumulactol.
Tricyclocohumol, Tricyclocohumene, Isotricyclocohumene, Tetracyclocohumol, and Eptitetracyclocohumol	Trans-isohumulone (iso-alpha acid)	Y	Bitterness thresholds in beer as umol/L: 30, 5, 10, 70, 70 (Trans-isohumulone is 20). Characterized as "lingering harsh bitterness".	The most abundant oxidation derived hop compounds in aged beer. All are derived from trans-isohumulone, which is the iso-alpha acid that is less stable than cis-isohumulone. Trans-isohumulone degrades into these faster at warmer temperatures and lower pH (no degradation at a pH of 6, slower degradation at a pH of 3, and very fast degradation at a pH of 1). Even differences as small as 0.1 pH (4.2, 4.3, and 4.4 pH values were tested) can make a significant difference in the degradation rate of trans-isohumulone into tricyclocohumol, with lower pH values leading to faster degradation. After storing beer in brown bottles at 28°C for 8 months, these degradation products were detected at high amounts. Tricyclohumol remains relatively stable, even in the presence of oxygen.

Acids

During aging, both alpha and beta acids oxidize and degrade with warmer temperatures and more oxygen exposure having a greater impact. The generally accepted theory is that oxygen interacts directly with hop acids. This event is called "autooxidation". An alternative theory to this is that oxygen indirectly oxidizes acids by first oxidizing the hop oils and turning them into pro-oxidants, which then oxidize the hop acids which are mixed in with the oils within the lupulin glands . The oxidation of hop acids corresponds with an increase in the Hop Storage Index (HSI), which is a practical way of measuring the overall freshness of hops. As the oxidation of hop oils rises, the measured HSI number on a lot of hops increases . These oxidized compounds lead to a higher amount of non-alpha-acid bitterness compounds in aged hops and have a remarkable effect on the bitterness of the beer. The bitterness from oxidized hop compounds has been described as more earthy, harsh, and astringent than the sharper, cleaner bitterness from iso-alpha acids .

Aging hops while exposed to oxygen develops a cheesy aroma due to isovaleric acid, isobutyric acid, and 2-methylbutyric acid. These acids are produced by the oxidative cleavage of acyl side chains of the hop resins . These cheesy oxidation compounds can be esterified to form wine-like and fruity tasting compounds (see Esters below and Aging and Storage) .

Storage conditions and variety play a large role in how acid content in hops changes over time. Beta acids are generally more resistant to oxidation than alpha acids. A study by Mikyška and Krofta (2012) found that after 12 months of storage at 20°C in open air, pellet hops lost 64-88% of their alpha acid content and 51-83% of the beta acid content, with the beta acids dropping off more significantly after 6 months (alpha acid content declined steadily throughout the aging period). These amounts varied with different Czech hop varieties (Saaz, Sládek, Premiant, and Agnus), and beta acids degraded slower than alpha acids as seen below (percentages listed below are how much percent was lost):

Storage	Oil	Hallertau Magnum (Pellet, 14% AA)	Saaz (Pellet)	Sládek (Pellet)	Premiant (Pellet)	Agnus (Pellet)	Saaz (Leaf)	Vital (Leaf)	Pure Beta Acid
Open air at 20°C for 12 months
	Alpha acids		-80%	-88.3%	-64.3%	-78.2%
	Beta acids		-60.5%	-83%	-53.7%	-51%	-50%	-77.5%	-99%
Open air at 40°C for 3 months
	Alpha acids	-100%
Vacuum sealed at 20°C for 12 months
	Alpha acids		-20.6%	-24.9%	-22.2%	-21.7%
	Beta acids		-2.7%	-1.7%	-2.1%	-1.2%
Vacuum sealed at 2°C for 12 months
	Alpha acids		-1.1%	-5.5%	-0.3%	-1.4%
	Beta acids		-1.7%	-2.3%	-0.4%	-0.5%

It has been established that many factors influence the initial content of alpha and beta acids, such as cultivar (variety), cultivation area, climate and environmental conditions, harvest year, and harvest date. For example, early harvest dates result in hop cones that are not fully developed and contain less alpha/beta acids, and late harvest dates can produce hop cones with lower alpha/beta acids as these acids begin to degrade. Thus, optimal harvest dates occur when the hop cones reach their maximum size but before they become brittle and hop acid degradation begins. Skomra and Koziara-Ciupa (2020) found that harvest date also affects how alpha and beta acids degrade over time during storage. They looked at alpha and beta acid degradation differences for 4 varieties of hops grown at the same farm, but harvest at 3-4 different dates (7-10 days between harvest dates) . The hops were stored at 5°C and 20°C in aerobic conditions for 12 months . As expected, the lower storage temperature of 5°C preserved the alpha and beta acids better than the warmer 20°C storage temperature. In general, an earlier harvest date also resulted in greater degradation of alpha and beta acids, but there were some exceptions to this. For example, Sybilla Harvest Date II produced the most stable alpha acid content (harvesting too early or too late resulted in less stable alpha acid content), while for Magnet Harvest Date II resulted in the most degradation of alpha and beta acids and Harvest Date III was preferable for alpha acid stability. In general, the stability of beta acids depended more on the harvest date than the stability of alpha acids . See the table below.

Skomra and Koziara-Ciupa (2020) also reported that for the first 3 to 6 months, the alpha and beta acids were relatively stable. The cooler storage had a longer period of initial stability than the warmer storage. After the initial period of stability, the alpha and beta acids began a rapid drop around 9 months of total storage. From 9-12 months, the rate of decline in alpha and beta acids was much slower and seemed to somewhat stabilize .

Storage	Oil	Sybilla (Leaf)	Puławski (Leaf)	Magnat (Leaf)	Magnum (Leaf)
Open air at 5°C for 12 months (Harvest dates I, II, II, and only for Magnat/Magnum IV)
	Alpha acids	-10.8%, -4.5%, -7.9%	-11.0%, -6.4%, -6.8%	-25.8%, -40.8%, -2.3%, -9.3%	-17.7%, -4.5%, -12.9%, -11.2%
	Beta acids	-7.6%, -6.3%, -8.5%	-28.1%, -10.9%, -17%	-33.3%, -37.2%, -21.1%, -22.3%	-28.1%, -7.6%, -3.9%, -5.2%
Open air at 20°C for 12 months (Harvest dates I, II, II, and only for Magnat/Magnum IV)
	Alpha acids	-28.5%, -11.3%, -27.1%	-18.6%, -35.3%, -37.6%	-35.4%, -56.8%, -31.7%, -36%	-38.3%, -25.7%, -28.9%, -24.4%
	Beta acids	-26.4%, -38.6%, -49.5%	-43.3%, 45.7%, 54.1%	-46.3%, -66.6%, -59.8%, -59.2%	-53.7%, -28.1%, -16.8%, -19.9%

Oxidized alpha acids (humulinones) are similar in taste perception to iso-α-acids, but have been described as less bitter (an average of about 66% as bitter on a 1 to 1 basis). The quality of the bitterness from oxidized alpha acids has been described in one study as "smoother and less lingering" than iso-alpha acids; this was attributed to humulinones being more polar than iso-alpha acids and therefore do not stick or linger on the tongue as long as iso-alpha acids . While the taste threshold of iso-alpha acids is 5-6 mg/L in light lager, the threshold for humulinones has been measured to be 8 mg/L in light lager (note that this is an average; tasters vary widely in how much bitterness they perceived from different bitter compounds) . Humulinone content increases in hops after being pelletized (whole leaf hops have less humulinones). In fresh pellet hops that have a relatively low humulinone content, the humulinones contribute little to the bitterness of the beer when boiled, however when dry hopped they readily dissolve into the beer and have a significant impact on the beer's bitterness. With heavy dry hopping, the humulinones also decrease iso-alpha acid content of beer with more than about 25 IBU's, but not in beer with less than about 20 IBU. The decrease in iso-alpha acids and perceived bitterness/IBU is partially made up for the bitterness of the humulinones themselves (humulinones are picked up in IBU measurements with a spectrophotometer and as such it has been suggested that IBU's be measured more accurately with HPLC). In beers with less than 20 IBU, high dry hopping rates greatly increase the bitterness/IBU due to the bitter humulinones . Humulinones also increase foam creation and stability by binding with the foam positive protein, Protein Z, via hydrogen bonding .

The rate of humulinone formation is limiting. Maye et al. (2016) showed that humulinone formation occurred rapidly during hop pelletization, and the concentration peaks during this time (these researchers found that further exposure to air did not increase humulinone content). They speculated that this is because when whole leaf hops are baled, only 20% of lupulin glands are broken, whereas when they are pelletized 100% of the lupulin glands are broken. In contrast, Taniguchi et al. (2013) found that humulinone formed slowly over 40 weeks in pellets that were stored at 20°C, but at 40°C and 60°C storage temperature they formed quickly and then diminished to very low levels at 10 weeks and 2 weeks respective to the higher storage temperatures. This demonstrated that warm storage increases the rate of humulinone formation. In addition, the oxidized hop compound 4′-hydroxy-allohumulinone increased trailing behind the humulinone formation and at a similar concentration at 20°C over 40 weeks of storage, and were much more stable than humulinones when stored at 40-60°C for 40 weeks . The exact mechanism by which alpha acids are converted to humulinones is not known. The amount of humulinone correlates strongly with the Hop Storage Index (HSI) . Humulinone content in long-aged hops (1+ years) has not been studied.

Oxidized beta acids produce some compounds that also contribute to the perception of bitterness, specifically hulupones. Unlike humulinones which form relatively quickly from the oxidation of alpha acids, hulupones form at a much slower rate . Also unlike humulinones, they survive boiling and fermentation. While some sensory analysis of beers containing oxidized beta acids describes the resulting bitterness as "harsh and clinging", another analysis by Krafta et al (2013) described the bitterness of oxidized beta acids in beer when added in their pure form at the beginning of the boil as "pleasant and not lingering". The more degradation of beta acids into oxidized beta acids that occurs in hops, the more bitter beers brewed with these hops will be . Two other compounds other than hulupones have been identified as being produced by the oxidation of beta acids, epoxycohulupone and epoxyhulupone. Their effect on beer flavor is not yet known; however, it is believed that hulupones have a greater impact on beer flavor and bitterness than these compounds .

The bitterness of hulupones has received some debate among researchers. In 1973, a researcher found that hulupones are about 50% as bitter as iso-alpha acids. Briggs et al stated the complete opposite, and that hulupones are twice as bitter as iso-alpha acids. More recent studies using modern analysis techniques found that on a weight for weight basis, hulupones are 35-40% as bitter as iso-alpha acids in one study, and another found that they were 84% (+/- 10%) as bitter as iso-alpha acids (note that this is an average; tasters vary widely in how much bitterness they perceived from different bitter compounds) . While the taste threshold of iso-alpha acids is 5-6 mg/L in light lager, the threshold for hulupones has been measured to be 7-8 mg/L in light lager .

Both humulinones and hulupones have been identified as forming due to the oxidation of hop acids. However, other researchers have reported that both of these bitter compounds formed during the boiling of hops, and another during the storage and aging of beer. In all cases, the amounts of the compounds directly correlated with the amount of hops used .

Other compounds have been associated with the oxidation of beta acids and are extracted during wort boiling. These are described as giving a long-lasting, lingering bitterness on the palate. They include hydroxytricyclo-lupulone, dehydrotricyklolupulone, and hydroperoxytricyklolupulone .

IBU

The overall effect of oxidized compounds in aged hops has been shown by Val Peacock, a former scientist at Anheuser-Busch. Peacock stored hops at four different temperatures for 18 months. His data showed that although the alpha acid content in the hops and the iso-alpha acid content in the beers brewed with them decreased the older the hops were stored, the measured IBU of the different beers was about the same. This is because the oxidized acids in hops show up in the same spectrum as iso-alpha acids when using the ASBC method of measuring IBUs with a spectrophotometer . This data is shown below. Caleb Buck's experiment seen below supports this. Although it has not been shown that oxidized alpha and/or beta acids can inhibit lactic acid bacteria, if they do, then this might help explain reports of using aged hops that originally had a high alpha acid content retaining a strong inhibitory effect towards lactic acid bacteria.

Storage Temperature	Alpha Acid in Hops	Iso-Alpha Acids in Beer	Beer IBUs
-15°F	3.2%	19.8 ppm	13.5
25°F	2.91%	18.1 ppm	12.0
45°F	1.71%	14.4 ppm	13.5
70°F	0.41%	2.9 ppm	11.0

Kishimoto et al. (2021) reported similar results when making beers with forcibly aged hops. They aged Magnum hop pellets (14% AA) at 40°C and exposed to air for a number of different days: 3, 5, 7, 10, 14, 21, 30, and 90 days. The hops aged for 14 days had 9.8% AA, 21 days had 4.4% AA, 30 days had 1.2% AA, and 90 days had 0% AA. The IBU (measured with a spectrophotometer using Method Beer-23A from the American Society of Brewing Chemists) for the different beers made with the aged hops was more or less the same despite how much alpha acids were left in the aged hops. However, beers brewed with the different aged hops reflected a rapid decrease in iso-alpha acids in the beers made with the aged hops. Perceived bitterness also decreased for the beers made with the aged hops, but not as much as the decrease in ppm of iso-alpha acids, again demonstrating the oxidized hop compounds carry some bitterness, but less bitterness than iso-alpha acids . See Figure 5 from Kishimoto et al. (2021):

It is therefore advised that brewers ask hop providers that offer aged hops what the original alpha acid percentage was when the hops were fresh, as well as the variety. This could be an important factor when determining how bitter the aged hops will taste, and potentially also how much they will negatively impact lactic acid bacteria growth. See also "Aged Hops in Lambic" below and this MTF thread on IBU's from aged hops.

Oils

Data from "Aging of hops and their contribution to beer flavor" by Kai C. Lam, Robert T. Foster and Max L. Deinzer. Aged I: 2 weeks at 90°F; Aged II: 60 additional days at 90°F.

Hop oils also generally degrade over time, however, their degradation rates are more complex. Lam et al. (1986) found that aging both cascade and North American grown Hallertauer Mittelfrueh resulted in an increase in grapefruit-like character, although the compound that caused this was not identified. In the case of Cascade the intensity of this flavor correlated with the age of the hops . In the Hallertauer hops, aging resulted in an increase in a spicy/herbal character , which is in agreement with reports of oxidized sesquiterpenes (specifically humulenol II, humulene diepoxides, caryophyllene, and to a lesser extent humulene monoepoxides and alpha-humulene) contributing a spicy/herbal flavor to beer . Many of the oils followed in the Lam et al. (1986) study which increased during a short accelerated aging period (2 weeks at 90°F) then decreased during extended aging (60 additional days at 90°F). The cascade hops lost more of the fruity/citrusy hop oils (myrecene, linalool, and geranial) than Hallertauer, suggesting that different strains of hops can withstand aging better than others. The concentration of hop oils are affected by the brewing process and fermentation (see the table) . Another study found that beta-ionone (classified as a ketone, and characterized as "floral" and "woody" ) increased in beers brewed with hops that were aged for 30 days at 40°C versus beers brewed with aged hops .

A 2017 study at the Shellhammer lab looked at how trained panelists and consumers perceived a lager beer dry hopped with slightly oxidized Hallertau Mittelfrüh hops (exposed to oxygen once, then stored at 38°C for two weeks) versus highly oxidized (daily exposure to oxygen and stored at 38°C for two weeks). They found that the trained panelists detected more characteristics that are associated with noble hops; e.g. more woody, earthy, and herbal characteristics in the lager beers dry hopped with oxidized hops. They also found the oxidized hopped beers to be more bitter (probably due to oxidized alpha and beta acids). Consumers were not statistically able to tell the difference. The study determined that oxidized hops might serve to provide nuanced increases in noble hop character . In a similar study by Hengyuan et al. (2023), aging Saaz hops for a short amount of time (aged at 30 ℃ in a ventilated environment for 5 days) reduced the grassy and resinous character and improved the spicy and woody character of single hopped beers (hopped at three points in the boil and dry hopped). Consumers also preferred this beer over the other samples, including fresh Saaz. However, over-aging Saaz hops resulted in less preference with consumers (30 ℃ for 10 days, 40 ℃ for 5 days, or 40 ℃ for 10 days). This effect was not demonstrated by Simcoe hops, however, indicating that short aging is only beneficial for some hop varieties. Under the same aging condition with Simcoe hops, consumers preferred the fresh Simcoe, and any degree of aged Simcoe was less preferred. The beers with aged Simcoe hops were described as having less fruity and floral character and more dry, thin bitterness .

• "Increasing Bitterness By Dry Hopping", article by Scott Janish on oxidized alpha acids.
• Hulupones - oxidized beta acids.

Polyphenols

Polyphenols, including polyphenol flavanoids, also degrade in hops as they age. However, storage conditions have less of an impact on the degradation of polyphenols compared to alpha and beta acids. Mikyška and Krofta (2012) found that regardless of how the hops were stored polyphenols started to decay after about 6 months and after 12 months aged hops lost about 30-40% of polyphenols and 20-30% of flavanoids .

Esters

During fermentation, it is believed that esters are produced by yeast metabolism from hop compounds such as alpha acids, beta acids, polyphenols, and hydrocarbons because they are not found in unhopped beer or in hops themselves. These esters include ethyl 2-methylpropanoate (citrus, pineapple, sweetness), ethyl 2-methylbutanoate (citrus, apple-like), ethyl 3-methylbutanoate (citrus, sweetness, apple-like), 2-phenylethyl 3-methylbutanoate (floral, minty), and 4-(4-hydroxyphenyl)-2-butanone (citrus, raspberry) . Kishimoto et al. found that some beer esters were increased when using unidentified pellet hops (described in the study only as "a bitter variety of 11.5% alpha acid") that were aged for 30 days at 40°C versus using fresh pellet hops that were stored cold (4°C). Specifically, in the beers that used the aged hops, they found a significant increase in citrus esters (ethyl 2-methylbutanoate, ethyl 3-methylbutanoate, and 4-(4-hydroxyphenyl)-2-butanone), and a decrease in "green, hop-pellet-like, and resinous" compounds such as myrcene and (Z)-3-hexen-1-ol in the beers made from aged hops. The beers brewed with aged hops were described as more citrusy, while the beers brewed with fresh pellet hops were described as more "hop pellet-like", resinous, floral, and "green". The authors speculated that since these esters were not present in beers brewed without hops that they were derived from the humulone and lupulone oils in the hops during yeast fermentation .

Oxidation of alpha acids, beta acids, and iso-alpha acids can lead to the formation of isovaleric acid, isobutyric acid, 2-methylbutyric acid, and 3-methylbutyric acid. These compounds can also be produced by fermentation without hops, but in smaller amounts, with ale strains producing more than lager strains. These acids can then become esterified during fermentation and beer aging to produce the compounds ethyl isovalerate, ethyl 2-methyl butyrate, and ethyl 3-methyl butyrate, which have been suspected to be partially responsible for wine-like character in aged beers and have been measured to form in beer after about 3 months of storage at room temperature . See also Esters in Aging Beer.

Thiols

Kishimoto et al. found an increase in the thiol 3-methyl-2-butene-1-thiol (MBT) in beers that were brewed with unidentified pellet hops (described in the study only as "a bitter variety of 11.5% alpha acid") that were aged for 30 days at 40°C versus using fresh pellet hops that were stored cold (4°C). Interestingly, this thiol was higher in beers where the aged hops were added to the boil rather than when they were added after the wort was cooled. The authors were not able to determine whether or not the MBT was derived from yeast fermentation, or from boiling the hops, but aging the hops increased the precursors for MBT . MBT has been described as the thiol that produces the "skunky" aroma in lightstruck beer .

See Also

• "Hop Storage", MoreBeer blog. 07/15/2015.
• Hop Freshness – Part 1: Hop Degradation and the Supply Chain and Hop Freshness – Part 2: Hop Bitter Acids by Balmy Juice Brewing.

Aged Hop Suppliers

• YCH offers 1-2 oz bags for homebrewers and 44 lb bags of aged hops; contact for more information.
• Hops Direct "Choice Debittered/Aged Hops" (Leaf - Cascade).
• Hops Direct "Choice Debittered/Aged Hops" (Pellet - Columbus).
• Freshhops "Lambic Hops" (Leaf - Willamette)".
• Yakima Valley Hops "Lambic / Aged Hops" (Pellet).
• Farmhouse Brewing Supply "Lambic Hop Blend" (Pellet - Blend of varieties that are aged for ~5 years and then pelletized [94]).
• The Malt Miller (UK).
• Northwest Hop Farms (BC, Canada).
• BSG sometimes offers aged pellet hops for commercial brewers; contact for details. See this MTF thread on experiences with these hops.
• Ted from Hop Heaven on eBay sells 8 oz and 1 lb bags of aged pellet and leaf hops. See this MTF thread on reviews of this product.
• Humlegårdens (Sweden); several varieties of aged whole leaf hops, 100 gram quantities.

Cryo Hops® and Debittered/"American Noble" Hops

YCH Hops has patented a process of extracting hop oils from hops using a proprietary cryogenic separation process that is claimed to preserve all of the components of each hop fraction. They also distribute the leftover hop material as "Debittered Leaf" or "American Noble". These Debittered Leaf products have been reported to taste like low flavor/aroma/alpha versions of their original variety (for example, debittered Mosaic tastes like lower alpha Mosaic). They reportedly do not have the same character has aged "lambic" hops .

Techniques

Kettle and Mash Hopping

Kettle hopping sour beers can be a difficult thing for the new sour beer brewer. The usage of hops generally inhibits most lactic acid bacteria species, however there are many exceptions to this. Lactic acid bacteria can have a range of hop tolerance, with species such as Lactobacillus acetotolerans that tolerated Goose Island's Bourbon County Stout at 60 IBU . Some breweries report that their house lactic acid bacteria can tolerate IBU ranges up to 10-20 IBU. White Labs claims that their L. delbuekii (WLP677) is tolerant of up to 20 IBU, however, most Lactobacillus cultures from yeast labs are not hop tolerant . See the Lactobacillus culture charts and hop tolerance for more information.

For both mixed fermentation sour beers and kettle sour beers, hops are often not used at all. In the case of kettle sours, sometimes brewers opt to add hops after the wort has been soured (see Wort Souring). Commercial brewers in the USA must by law use 7.5 pounds of hops for 100 barrels of beer (malt beverages without hops can still be approved by the FDA instead of the TTB; contact the TTB for guidance ). Since there is no US regulation for when the hops must be added, mash hopping might be a considered technique for commercial breweries in the US and in other parts of the world where hops are a requirement for beer (mash hopping retains only about 30% of the IBU that a 60 minute boiling addition does ). In historical German Berliner Weisse brewing, mash hopping or boiling hops during the decoction were also typical techniques (see Berliner Weisse historical brewing). Another historical technique for adding hops to beer is to add a hop tea (hops boiled in water), for example in historical raw ale brewing . For lactic acid cultures that are hop tolerant, hops can be used as a way to inhibit the amount of acid produced by them if the brewer desires this. Another advantage of using at least some hops in the kettle is that various compounds from hops contribute to head retention, and using a small amount of hops in the kettle (and perhaps dry hopping) can greatly assist with head retention in sour beers.

A popular technique for 100% Brettanomyces Fermentation is to use a typical IPA recipe. Hops do not inhibit Brettanomyces yeast. Some of the fruity characteristics of Brettanomyces can complement the fruity character of hops such as Citra, Amarillo, and Galaxy. For beers that are fermented with just S. cerevisiae and Brettanomyces but not lactic acid bacteria (such as some American farmhouse ales), Old World and noble hops are often used as well as North American and New Zealand/Australian citrusy hops, depending on what flavor and aroma profile the brewer is intending.

See also:

• "Hoppy Sour Beers", Dec 2016 BYO article by Michael Tonsmeire.
• MTF thread on barrel-aged NEIPA/dry hopping before barrel aging; inspired by Sour Hour Podcast #117 with Kevin Osbourne.

Whirlpool Hopping

On commercial systems, adding hops during the whirlpool has become a common technique. The idea is that hopping during the whirlpool will decrease the amount of isomerization of alpha acids in the final beer, while providing flavor and aroma from the hops.

Aaron Justice reported that a considerable amount of isomerization occurs on both a 150 BBL system (75-90 minutes of total steeping time), a 50 BBL system (65-80 minutes of total steeping time), and a 5 BBL pilot system (35-40 minutes of total steeping time). Justice reported an average of 30% utilization (the amount of iso-alpha acids from the potential alpha acids), with a 12.2% deviation. The deviations were based on the gravity of the wort and the amount of hops added before the whirlpool. With lower gravity worts and worts with less kettle additions, a high increase in utilization was observed. Most of the IBU's were gained within the first 10 minutes of the whirlpool, with only very small increases in IBU (~3 IBU) after 10. This data indicates that the total whirlpool steeping time and thus brewhouse size does not necessarily have a large impact in the amount of isomerization that occurs during commercial whirlpooling. The temperature of the whirlpool was not reported .

Dry Hopping

Dry hopping is the technique of adding hops to beer that has finished fermenting or is in the process of fermenting. Historically, dry hopping is associated with English pale ales of the 1800's, and it was re-discovered by Fritz Maytag of Anchor Brewing Company in 1975 when the company brewed the first American IPA, Liberty Ale (20 mins in). Brewers have had positive and interesting results dry-hopping sour and funky beer. Often fresh American or New Zealand varieties that complement fruit flavors are chosen, however, other varieties have been used as well, including English and German hops. Just as in dry hopping normal beers, dry hopping sour/funky should be done after the beer has matured. Dry hopping for around 1-3 days before packaging the beer is adequate for extraction, depending on whether or not the beer is recirculated or agitated (agitation of the beer while on contact with the dry hops attains full extraction in 24 hours) . Hopping rates generally range from 0.5-1 ounces per 1 gallon of beer (1-2 pounds per bbl or 3.7-7.5 grams per liter) to achieve hop-forward flavors, although lesser rates can be used to achieve a more subtle character (see the threads below) .

Dry hopping can contribute to bitterness in beer through oxidized alpha acids and oxidized beta acids. Oxidized alpha acids can also reduce iso-alpha acids in beers that begin with more than 25 IBU from iso-alpha acids, potentially reducing percieved bitterness after dry hopping (see Oxidized Alpha Acids above). Some alpha acids will also dissolve into the beer, which are estimated as being 10% as bitter as iso-alpha acids. Dry hopping also has a linear impact on the pH of beer regardless of the starting IBU or pH: the pH rises by 0.14 per pound of hop pellets per barrel of beer in a beer that started with a pH of 4.2 (~0.5 ounces per gallon or 3.7 grams per liter) . This rise in pH might be less in more acidic beers that are dry hopped since pH is a logarithmic scale. Dry hopping can also reduce head retention in beers, although this is variety dependent (one study found that dry hopping with Eureka and Apollo hops increased head retention, while dry hopping with Bravo, Centennial, and Cascade decreased head retention). Extended dry hopping times (after 3 days) can also reduce head retention .

See also:

• Bru Lab podcast Episode 079 - Impact Dry Hopping Has On Bitterness, IBU, and pH w/ Dr. John Paul Maye.
• The Rare Barrel reports on an anecdote that dry hopping in a less sour beer extracts better hop aroma, and Brettanomyces preserves the character.
• MTF thread by Dave Janssen on experiences with doing long-term dry hopping with noble hops in sour beers. See also Dave's research on a 1911 saison that was dry hopped long term.
• MTF thread on the possibility/mechanism of dry hopping contributing to the "funky" character of sour beers.
• MTF thread on dry hopping with aged hops.
• MTF thread from Benedikt Koch on using aged hops in a natural cider, inspired by Revel Cider.

Inhibiting Lactic Acid Bacteria

Dry hopping inhibits Gram-positive bacteria such as Lactobacillus. Humulinic acids have been found to greatly inhibit bacteria (see Antimicrobial Properties). Other compounds such as non-isomerized alpha acids, oxidized hop acids, or the small amount of isomerization of alpha acids that happens in beer at room temperature , could contribute to inhibiting lactic acid bacteria. See antimicrobial properties above. See also reported data below.

• Caroline Whalen Taggart's data point on the effects of dry hopping on L. plantarum (GoodBelly). No hops finalized at a pH of 3.53, and the dry hopped version finalized at a pH of 4.35. She used around 4 grams per gallon of 10-15 AA hops .
• Per Buer's experiment on the effects of dry hopping on Lactobacillus:

• "CLevar" on Ratebeer.com data point on Lactobacillus being inhibited by hops, but not as much by iso-alpha acid hop extract.

The Freshening Power of the Hop (Hop Creep)

Also known as "dry hop creep", it was first discovered in 1893 by Brown and Morris that dry hopping increases the ABV of beers and dries them out. Dry hop creep, along with the secondary fermentation of Brettanomyces in long aged British ales of the late 19th and early 20th centuries, were once characterized as the potential mechanisms by which long aged ales could retain a high level of carbonation in casks . It was proposed that the likely cause is the release of glycolytic enzymes that break down starches into sugars which viable yeast can then ferment. Brewers normally aim to control the final alcohol percentage in a beer through brewhouse operations rather than postfermentation dilutions with lower/higher alcohol beers or water. This approach to brewing is called "brewing to final gravity." Due to the need to have a predictable ABV for government regulatory reasons, unexpected fermentation is, therefore, a concern for many breweries . Hop creep can also result in additional attenuation and higher carbonation after packaging, as well as diacetyl production.

Historically, there have been two studies published on the phenomenon of hops releasing glycolytic enzymes that break down starches during dry hopping: Brown and Morris (1893) and Janicki et al. (1941). More recently, several researchers and brewers have revisited this phenomenon. Brown and Morris (1893) discovered that hops could break down maltodextrin, but failed to identify the enzymes from the hop plant material and hypothesized (probably incorrectly) that tannins were inhibiting the enzymes. Janicki et al. (1941) came to similar conclusions regarding the enzymes and tannin inhibitors, and they also concluded that the enzyme activity was independent of hop variety, geography, age, storage conditions, pH values between 4.1 and 4.8, and that one or more additional unknown factors were at play .

More recent studies have shown that there is a difference in this enzymatic power between different hop varieties. Cibaka et al. (2017) reported an increase in ABV when dry hopping with Amarillo and Sorachi Ace hops, but not when dry hopping with Citra or Hallertau Blanc. Interestingly, they also found that Mosaic hops resulted in the opposite effect; the Mosaic dry hopped beer dropped from 4% ABV to 3.6% ABV. It was hypothesized (possibly incorrectly) that Mosaic hops might release some sort of unidentified molecule that inhibits yeast fermentation/growth or viability. Cibaka et al. (2017) also demonstrated that late kettle additions might work to combat dry hop creep; the beer dry hopped with 2 g/L of Sorachi Ace finished at 5.1% ABV, while a beer that received a late kettle addition of 2 g/L of Sorachi Ace in addition to 2 g/L of Sorachi Ace dry hop finished at 4.3% ABV (the control with no dry hop finished at 4.0% ABV) .

Kirkendall et al. (2018) found that hop varieties also have a varying ability to ferment dextrins. They reported the following ABV increases when dry hopped in a pale ale at one pound per barrel: Centennial hops (+0.27%), Citra (+0.12%), Simcoe (+0.33%), Cascade (+0.49%) and Amarillo (+0.49%). Prolonged contact with Centennial hops (42 days) increased the ABV even more so and resulted in a nearly 1% ABV increase. Rousing the hops into suspension hastened the increase in ABV compared to samples that were left still. From their results, it appears as though contact with hops during dry hopping continues the breakdown of starches and dextrins into fermentable sugars. They also concluded that dry hopping at a temperature that is too cold for the yeast strain in the beer to ferment resulted in no change in ABV. They compared the enzymatic activity of Centennial hops that were stored at -20°C versus room temperature storage and found that there was no significant difference, indicating that the unidentified enzymes are relatively stable .

Kirkpatrick and Shellhammer (2018) found that the enzymes responsible for the conversion of dextrins into sugars include amyloglucosidase (removes glucose from non-reducing ends of α-1,4 and branching α-1,6 linkages, with a preference for α-1,4 linkages and longer chain oligosaccharides), α-amylase (hydrolyzes randomly along glucopolysaccharides to produce maltose, maltotriose, maltopentaose, and maltohexaose products from amylose as well as maltose, glucose, and branched dextrins from amylopectin), β-amylase (saccharifiying enzyme, cleaving maltose in small amounts from nonreducing ends of glucopolysaccharides, and to a minor extent, maltotriose), and limit dextrinase (debranches limit dextrins at α-1,6 linkages, producing linear α-1,4 chains which can further be degraded by the combined action of amylases). They were able to successfully extract them from Cascade pellet hops using commercially available assays (enzyme specific para-nitrophenyl blocked oligosaccharide substrates). The amount of α and β-amylase found in Cascade hops was well below that of malted barley, but within the range reported in other plant leaves. These enzymes are denatured by high temperatures, and as such would be denatured when boiling hops. They reported a similar increase in ABV of 1.3% after 40 days when dry hopping a beer with Cascade hops (and a decrease of 1.9°P) at a rate of 10 g/L. They also found that the hops contained glucose and a small amount of fructose, which accounted for a sugar increase of 0.02−0.03 °P per gram of hops. More studies on whether or not the amount of dry hopping has a large effect needs to be done, and whether or not warmer temperatures speed up the enzymatic breakdown of dextrins, and the authors hypothesized that the rate of dextrin break down could be slowed by dry hopping at lower temperatures . Rubottom and Shellhamer (2023) later demonstrated that drying hops at 150°F reduced the amount of enzymes in dried pellitized hops versus drying them at 130°F .

Kirkpatrick and Shellhammer (2018) also reported that the exposure time of the beer to the dry hop material played a significant role in the breakdown of dextrins. Most of the breakdown of dextrins occurs within 5 days (+0.7% ABV), but continued slowly up until at least 40 days (+1.3%). They also tested removing the hops via centrifuge and storing the beer at 10°C or 20°C. Their results suggested that the effect of the enzymatic breakdown of dextrins by hops appears to only be active when in contact with the hops and that once the beer is removed then this breakdown of dextrins stops. The authors suggest that to avoid as much breakdown of starches and over-attenuation from dry hops as possible, brewers can limit the amount of time sits on the hops and reduce the temperature, however, it is also important to consider how this might impact the product's flavor and careful measures should be taken to balance the over-attenuation problem and overall beer quality . After removing the beer from the hops, a second diacetyl rest has been suggested as a way to clean up any diacetyl or off-flavors that the yeast produces from the additional fermentation during dry hopping . Other recommended solutions to avoiding hop creep is pasteurizing, filtering, or cold crashing out the yeast before dry hopping, storing the beer cold so that the yeast remains inactive, reducing dry hopping amounts, and dry hopping before fermentation is finished .

Teraoka et al. (2021) argued that enzymes present in dry hops are not derived from the hop plants themselves, but microbes living on the hops and that the reported variability of starch degrading enzymes present in hops is due to the varying environmental conditions created by drying hops that encourage or discourage microbial growth. It has been reported that proteobacteria are the dominant type of bacteria that grow on hops, with the majority of them being Pseudomonas and Sphingomonas, with Pseudomonas having being previously reported to produce alpha-amylase. However, the authors recommend that further research is needed to identify which microbe species might be producing these enzymes on hops. They found that hops treated with the anti-microbial chemical sodium azide resulted in hops with much lower starch degrading enzymes. They also reported that alpha-amylase decreased in dried leaf and pellet hops over 3 months of anaerobic storage (storage temperature did play a role in the degradation rate of the enzymes). Alpha-amylase stayed relative consistent in fresh hops during storage. Beta-amylase remained stable over the three month storage time regardless of hop type. The authors also acknowledge another possible variable being that hop seed material might contain starch; however, seeded hops are generally not used in the brewing industry . See also MBAA Podcast episode 229 "Is Hop Creep Caused by Microorganisms?" with Dr. Charlie Bamforth.

Bruner et al (2021) investigated whether or not yeast strain selection has an impact on hop creep with the goal of finding if any strains would reduce the potential for dry-hop creep. They examined 30 different Saccharomyces yeasts from different yeast labs, and measured the real degrees of fermentation (RDF) that occurred after dry-hopping post fermentation. With the exception of two strains, all of the yeasts re-fermented the beer after dry hopping, indicating that yeast strain selection won't reduce the chances for dry hop creep. There were two exceptions to this. The first was a diastatic strain of Saccharomyces cerevisiae (SafAle™ BE-134), which was able to break down starches in the beer prior to dry hopping due to the diastatic properties of this yeast strain. The other exception was a strain of Saccharomyces mikatae that is used as a co-fermenter in wine fermentations and is a poor attenuater of wort. The study also found no correlation between flocculation and attenuation from dry-hop creep, but suggested that further research be done to investigate the belief that higher flocculating strains could reduce the negative effects of dry hop creep .

A Masters thesis by Tanriverdi (2024) demonstrated that that longer contact times of hops in beer significantly promoted enzymatic activities involved in glucose production, maltose degradation and isoamyl acetate hydrolysis. The same observations were evidenced at higher temperatures. It was noted that a dry heat treatment of hops prior to incubation revealed to reduce the release of glucose and the hydrolysis of isoamyl acetate. Surprisingly, only a high dosage of 10% v/v ethanol in beer resulted in inhibition of amylolytic enzymes. For this dosage, esterase activity remained intact. Concerning the influence of hop variety, only amylolytic enzymes of Simcoe hops exhibited pronounced activities compared to other varieties. Finally, cryo pellets exhibited lower enzymatic activities compared to T90 pellets and whole cones, which indicates that enzymes could be mainly found in vegetative material .

See also:

• Kirkpatrick and Shellhammer poster at the 2017 ASBC Annual Meeting.
• CDR BeerLab® experiment showing dry hop creep effects.
• Article on Rockstar Brewer Academy on how dry hop creep can cause diacetyl.
• Dry Hop Creep presentation by Caolan Vaughan in Australia.
• CBC presentation on dry hop creep by Allagash Brewing Company.
• Methods for avoiding hop creep and diacetyl production from hop creep explained by Nick Zeigler ("Hop and Brew School" podcast).
• MBAA podcast episode 98 on dry hop creep.
• Episode 008 | The Freshening Power Of Hops with Jake Kirkendall on the The Brü Lab podcast.
• One Drop Brewing Co's "Clean Fusion" method of using a centrifuge to remove yeast before dry hopping in order to avoid hop creep.

Aged Hops in Lambic and Other Spontaneous Fermentation Beer

Brasserie-Brouwerij Cantillon aging their hops; image provided by Dave Janssen.

Modern lambic traditionally uses aged hops at a moderate rate to help limit and select for microbes and regulate acid production. Modern Lambic brewers cite rates in the range of roughly 450 grams of hops per hectoliter of finished beer (0.6 ounces per gallon) (~43 min in) (see also the notes pertaining hopping rates on the Cantillon page), with some brewers possibly going above this range. The age of hops used depends on the producer and their preferences/stock. Cantillon uses hops that are roughly 3 years old, while 3 Fonteinen reports using hops that are over 10 years old (~48 minutes in). Jester King reported using 0.66 - 0.75 pounds of whole leaf aged hops per BBL (0.34-0.39 ounces per gallon) in their spontaneously fermented ales (~31:00 mins in). Lambic brewers either add their hops while still collecting wort, sometime before the wort comes to a boil (also known as "first wort hopping"), or shortly after boil is reached (~48 min in). The hops are then boiled with the wort for essentially the full length of the boil . The resulting lambic beers are often surprisingly bitter, especially when young. Historically, there is some evidence that lambic brewers used a combination of aged hops and fresh dried hops. Not all aged hops are the same; different varieties/sources result in different levels of residual alpha/beta acids (probably not zero), oxidized acids, IBU's, perceived bitterness, and inhibition of lactic acid bacteria. Varieties with high acids and hop oils probably have more residual acids and oils, and aging times/conditions may not be ideal enough to completely age high alpha/beta/oil hop varieties. Therefore, it is impossible to give a blanket statement on how much aged hops to use given a specific lot of aged hops. Andrew Holzhauer from Funk Factory Geuzeria suggests tasting aged hops for bitterness and adjusting the amount of hops depending on how bitter they taste , while James Howat from Black Project suggests making a small batch and having the wort/beer analyzed for IBU's and adjusting accordingly.

For example, homebrewer Caleb Buck performed an experiment comparing two different hopping rates for spontaneously fermented beer at home using whole leaf aged hops that were independently tested to have 0.5% alpha acids and 0.2% beta acids and were obtained from Hops Direct in Junuary 2016 . The two rates tested were 0.3 ounces of aged hops per gallon and 0.6 ounces per gallon, both added at the beginning of the boil . Samples of the two worts were sent to Sweetwater Science Labs to perform IBU analysis using the ASBC standard IBU test. Interestingly, the results were 72 IBU and 127 IBU respectively. The unexpectedly high IBU might be due to the variety of aged hop, as well as oxidized hop acids showing up in the standard IBU test (see Peacock's data here that showed that aged and fresh dried hops produce a similar IBU). After about 7 months, one of the 0.3oz/gal batches got down to a pH of 3.6, a second batch at 0.3oz/gal got to a pH of 4, while the 0.6oz/gal batches remained within a pH of 4.2 - 4.3. From this experiment, Caleb will attempt using only 0.15 oz/gal of aged hops which should be closer to 30 IBU and so that more acidity can be achieved. James Howat from Black Project Spontaneous Ales suggests making sample wort with the hops that will be used for a larger batch and sending that sample off for IBU testing in order to more easily achieve the desired IBU's. More detail can be found on Caleb Buck's collected data on cooling rates, acidity from hopping rates, and other collected data over a multi-year, multi-batch experiment and Caleb's interview on this experiment on BasicBrewing Radio.

See also:

• "Lambic characteristics - FG and IBUs in Geuze" on Hors Categorie blog.
• "Hops in spontaneous fermentation" on Hors Categorie blog.
• MTF discussion on methods of aging leaf and pellet hops.
• MTF discussion on the general benefits of using aged hops in sour beers.
• MTF discussion on IBU's, alpha acids, oxidized bittering compounds, etc. might play a role in aged pellet hops.
• Lambic
• Spontaneous Fermentation
• Gueuze and Lambic Character

Historic hopping in lambic and other mixed-fermentation beer

While modern lambic uses aged hops almost exclusively, it was common for historic lambic to blend both aged and fresh hops. The exact ratio of fresh to aged hops changed over time and could vary depending on the harvest (poor hop years may have relied more heavily on aged hops while years of good harvests would make more use hops of the recent harvest). In addition to the difference in hop age between modern and historic lambic, hopping rates also differ significantly between modern and aged hops. It is important to note that the quality of these hops are certainly different from modern hops, and that hop origin could have a significant influence on suggested hopping rates (see the hopping rate table and notes regarding hop origin conversion factors from historical texts). While hop quality would have improved moving to the modern day while hopping rates were dropping, there is mention in historic lambic literature of lambic in the late 1800s being more bitter than lambic from the mid-1900s (and, subsequently, similar to historic saison in the increased hop presence in a mixed-fermentation beer)

Historical documents dealing with Belgian brewing show a steady progression from high doses of fresh hops in lambic to the sort of hop composition and origin that are in use today. In 1851 Lacambre mentions rates for Belgian hops of 760-860 g/Hl and specifically highlights the use of young hops. Belgian brewing scientist Henri Van Laer recommended a hopping rate of 700-800 g/Hl in 1890, roughly in agreement with Lacambre though slightly lower. In the early 1900s, citing information from 1896, Le Petit Journal du Brasseur mentions a hopping rate of 540 g/Hl using a mix of Belgian and Bavarian hops and a split of 2/3 young, 1/3 old in good years (and 50/50 in bad years). In 1928 Le Petit Journal du Brasseur recommends a larger proportion of aged hops (2/3 aged, 1/3 fresh) and rates of 600g/Hl of Belgian hops. Considering the difference in strength in German and Belgian hops, this fits with a stable or decreasing hopping rate from that given in the early 1900s. In 1937 exclusive use of aged hops is recommended, though as noted in 1946, year old hops may be preferable to hops that were aged longer in poor conditions. Also in the 1940s Le Petit Journal du Brasseur recommends hopping rates of 400-500 g/Hl, roughly in agreement with modern times, and notes that the lambic of this time was softer than historic lambic.

(In Progress) Lambics aren't the only historic mixed-fermentation beer to make use of aged hops. Though the specific mention of aged hops for saison and bieres de garde does not seem to be the norm, aged hops were used at times, such as when more acidity was desired. These hops were also more likely to be used toward the beginning of the brewing season in months like October where the current harvest may have been considered too fresh for proper use. Notes: Give some discussion of hopping saison and bieres de garde. See hopping grisette table for some hopping rates, PJB, etc.

James Howat of Black Project Spontaneous Ales uses 0.5 ounces of aged hops per gallon of beer for spontaneously fermented beers brewed using traditional lambic techniques .

See also:

• MTF discussion on using aged hops in other styles of beers, including historical references and tips on producing lambic-like character from aged hops and commercial cultures.
• MTF discussion on leaving hops beer fermented with Brettanomyces long term; inspired by historical English brewing methods.

Spent Hops

There has been some research and experimentation on using spent hops (mostly spent dry hops) in a second beer.

• MTF thread containing summaries of science and historical use of re-using spent hops.

Hop Extract Products

• Craft Beer & Brewing Magazine Podcast Episode 202: Brandon Capps of New Image Brews Better IPAs Through Chemistry.

See Also

Additional Articles on MTF Wiki

• Cantillon
• Glycosides
• Spontaneous Fermentation
• Lactobacillus
• Lambic

External Resources

• "Free Exhaustive Literature Review on Hops (Humulus lupulus L.)," Keven Bélanger Harbour; Journal of the American Society of Brewing Chemists.
• BarthHaas Hop Harvest Guide with flavor wheels.
• "Hop Queries"; Stan Hieronymus's hops newsletter.
• Hop Growers of America video presentations (YouTube).
• Virginia Tech Virginia Cooperative Extension "Hops" webpage: growing and agriculture resources.
• "The Hop Plant Dissected" by Lisa Meoli, 2015.
• "Hoppy Sour Beers", Dec 2016 BYO article by Michael Tonsmeire.
• "Dry Hopping Effect on Bitterness and IBU Testing" by Scott Janish.
• YCH hop variety database.
• Per Buer's Video Demonstration of how dry hopping inhibits Lactobacillus.
• Blog Article on Brett and Glycosides by Cy Wood.
• "How hops prevent infection", by Lars Garshol.
• "Unlocking Hop and Fruit Flavors from Glycosides", HBT article by Dennis L Waldron.
• Beer Legends Hop Varieties - gives vital statistics on hops including acid content, physical cone characteristics, storage and growth details, and oil content.
• TTB Hop Requirements for USA commercial breweries.
• Blog article on hops in spontaneous fermentation by Dave Janssen
• Cohumulone ranges by hop variety.
• "CRISPR Yeast and Hop Compounds" by Dr. Matt Humbard; a critical response of yeast being modified to make two hop compounds.
• Summary of a Shellhammer presentation on dry hop saturation, bitterness from dry hopping, and hop creep (Pat's Pints blog, Jan 2019).
• Hop and Brew School podcast interview with Vinnie Cilurzo from Russian River Brewing, Jay Goodwin from The Rare Barrel and Charlie Johnson from the Ronin Fermentation Project on using fresh and aged hops in sour beer.
• Overview of scientific evidence of health benefits of polyphenols.
• Survivable Compounds Handbook.
• The hops that built craft beer – a documentary | The Craft Beer Channel.