Difference between revisions of "Soured Fruit Beer"
m |
m |
||
Line 46: | Line 46: | ||
* Pureed fresh - pureeing fresh fruit has the benefit of extracting the fruit flavor faster. It also sinks to the bottom of the fermenter <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1172395836121962/?comment_id=1172413292786883&offset=0&total_comments=10&comment_tracking=%7B%22tn%22%3A%22R4%22%7D Conversation with Dara Rae on MTF regarding puree. 11/1/2015.]</ref>, so the problem of floating whole fruit is avoided. Puree can be difficult to rack the beer off of, and more beer may be lost compared to using whole fruit. Some brewers choose to heat pasteurize freshly made puree. | * Pureed fresh - pureeing fresh fruit has the benefit of extracting the fruit flavor faster. It also sinks to the bottom of the fermenter <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1172395836121962/?comment_id=1172413292786883&offset=0&total_comments=10&comment_tracking=%7B%22tn%22%3A%22R4%22%7D Conversation with Dara Rae on MTF regarding puree. 11/1/2015.]</ref>, so the problem of floating whole fruit is avoided. Puree can be difficult to rack the beer off of, and more beer may be lost compared to using whole fruit. Some brewers choose to heat pasteurize freshly made puree. | ||
* Aseptic puree - Same as "Pureed Fresh", but has already been pasteurized. This is usually the case for commercially available puree. We recommend [http://www.oregonfruit.com/specialty-fruit-products Oregon Specialty Fruit] or [https://www.perfectpuree.com/ The Perfect Puree] for quality commercial puree. These purees often have antioxidants such as citric and absorbic acids, cane sugar, and other juices added to them <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1308527842508760/?comment_id=1308584599169751&comment_tracking=%7B%22tn%22%3A%22R1%22%7D Conversation with Ehren Schmidt about Perfect Purees having cane sugar and acids added to them on MTF. 05/18/2016.]</ref>. Check the ingredients list of any product before ordering it. Much like fresh purees, aseptic purees or pulps may result in a fair amount of volume loss at packaging, and some puree making it into the final package can be problematic for gushing <ref name='Adi mango pulp discussion'>[https://www.facebook.com/groups/MilkTheFunk/permalink/1234801133214765/ Adi mango pulp discussion]</ref>. See the [http://www.oregonfruit.com/fruit-brewing/category/brewing-with-fruit/brewing-faq Oregon Fruit webpage] for tips on usage amounts and how to use puree for brewing (they recommend 1/2 to 2 pounds of puree per gallon of finished beer). | * Aseptic puree - Same as "Pureed Fresh", but has already been pasteurized. This is usually the case for commercially available puree. We recommend [http://www.oregonfruit.com/specialty-fruit-products Oregon Specialty Fruit] or [https://www.perfectpuree.com/ The Perfect Puree] for quality commercial puree. These purees often have antioxidants such as citric and absorbic acids, cane sugar, and other juices added to them <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1308527842508760/?comment_id=1308584599169751&comment_tracking=%7B%22tn%22%3A%22R1%22%7D Conversation with Ehren Schmidt about Perfect Purees having cane sugar and acids added to them on MTF. 05/18/2016.]</ref>. Check the ingredients list of any product before ordering it. Much like fresh purees, aseptic purees or pulps may result in a fair amount of volume loss at packaging, and some puree making it into the final package can be problematic for gushing <ref name='Adi mango pulp discussion'>[https://www.facebook.com/groups/MilkTheFunk/permalink/1234801133214765/ Adi mango pulp discussion]</ref>. See the [http://www.oregonfruit.com/fruit-brewing/category/brewing-with-fruit/brewing-faq Oregon Fruit webpage] for tips on usage amounts and how to use puree for brewing (they recommend 1/2 to 2 pounds of puree per gallon of finished beer). | ||
− | * Concentrates and extracts - Concentrates can lose aromatics due to the process, and are generally not as recommended. However, some manufacturers such as Kings Orchards uses a process that reintroduces the aroma back into the concentrate <ref name="kohlmorgen">[https://www.facebook.com/groups/MilkTheFunk/permalink/1167993543228858/?comment_id=1168045469890332&offset=0&total_comments=25&comment_tracking=%7B%22tn%22%3A%22R4%22%7D Conversation with Kyle Kohlmorgen on MTF regarding fruit. 10/23/2015.]</ref>. Other manufacturers have been reported to produce high quality concentrates, such as Coloma. Some brewers use concentrates/extracts blended with puree or whole fruit. See [https://www.facebook.com/groups/MilkTheFunk/permalink/1955721414456063/ this MTF thread] for a discussion on the benefits of using concentrates. | + | * Concentrates and extracts - Concentrates can lose aromatics due to the process, and are generally not as recommended. However, some manufacturers such as Kings Orchards uses a process that reintroduces the aroma back into the concentrate <ref name="kohlmorgen">[https://www.facebook.com/groups/MilkTheFunk/permalink/1167993543228858/?comment_id=1168045469890332&offset=0&total_comments=25&comment_tracking=%7B%22tn%22%3A%22R4%22%7D Conversation with Kyle Kohlmorgen on MTF regarding fruit. 10/23/2015.]</ref>. Other manufacturers have been reported to produce high quality concentrates, such as Coloma. Some brewers use concentrates/extracts blended with puree or whole fruit. See [https://www.facebook.com/groups/MilkTheFunk/permalink/1955721414456063/ this MTF thread] for a discussion on the benefits of using concentrates. Extracts tend to be more singular in flavor, and combining different extracts from different companies has been suggested (or blending extract with real fruit/puree to help boost the flavor of certain fruits such as blueberries). |
* Juice - Make sure there is no sugar or preservatives added <ref name="kohlmorgen"></ref>. R.W. Knudsen and Lakewood Organic brand juices have been recommended if available <ref name="Coffey_pomegranate">[http://www.alesoftheriverwards.com/2015/11/pomegranate-margarita-gose.html Pomegranate Margarita Gose. Ale of the Riverwards Blog. Ed Coffey. 11/13/2015. Retrieved 11/19/2015.]</ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1247842675243944/ MTF Thread on Lakewood Juice. 03/07/2016.]</ref>. Juice ferments out faster than whole fruit. This gives the advantage of being able to add a little bit at a time to the secondary fermenter, and being able to add to taste. | * Juice - Make sure there is no sugar or preservatives added <ref name="kohlmorgen"></ref>. R.W. Knudsen and Lakewood Organic brand juices have been recommended if available <ref name="Coffey_pomegranate">[http://www.alesoftheriverwards.com/2015/11/pomegranate-margarita-gose.html Pomegranate Margarita Gose. Ale of the Riverwards Blog. Ed Coffey. 11/13/2015. Retrieved 11/19/2015.]</ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1247842675243944/ MTF Thread on Lakewood Juice. 03/07/2016.]</ref>. Juice ferments out faster than whole fruit. This gives the advantage of being able to add a little bit at a time to the secondary fermenter, and being able to add to taste. | ||
* Dried/Dehydrated - Make sure they are oil and sulfur free. Oils can be considered a processing aid, and don't have to be listed on the ingredients list. | * Dried/Dehydrated - Make sure they are oil and sulfur free. Oils can be considered a processing aid, and don't have to be listed on the ingredients list. |
Revision as of 11:07, 17 January 2018
The acidity and fruity characteristics in many mixed-fermentation beers make them good candidates for fruit additions. It is not recommended to put fruit into a beer to cover up some major flaw or off character. Fruit can complement a good beer but it will likely not fix problems. Quality fruit is expensive and you'll want to start from a good base if you are going to invest the time and money in good fruit for a beer.
Some producers use the term maceration to describe the addition of fruit or herbs to a beer. Maceration in beer is the extraction of flavor-active and colored compounds as well as other constituents of fruits and herbs by soaking them in the beer. The rate at which compounds are extracted during maceration depends on factors such as temperature and pH.
Contents
[hide]When To Add Fruit
When to add the fruit depends on the style of beer and what the brewer is going for. Generally, fruit is added after a sour or mixed fermentation beer has finished aging and maturing. This preserves the fruit character more than other methods. For example, a mixed fermentation sour beer might take 6-12 months for the Brettanomyces character to develop fully. After this maturation, the fruit should be added, and then aged for another 1-2 months. For a kettle sour, the same rule applies, but the time frame is generally much shorter. Since kettle sours generally mature much faster than mixed fermentation beers, fruit can be added much sooner. For example, if the kettle sour is done fermenting after two weeks, fruit can be added at that time.
Another method would be to add the fruit earlier on during the aging process. This can help extract more from fruit skins or seeds, but some of the more delicate aromas and flavors of the fruit could age out of the beer in that time. For example, Belgian kriek style beers are sometimes aged on cherries for 6-12 months, which is believed to be the time required to fully extract the character from the cherries and pits [1].
A combination of adding fruit earlier on in the fermentation, and then again after the beer has matured is another technique that brewers have used. For example, The Lost Abbey's Framboise de Amorosa is aged in a wine barrel for a year and during that time receives three separate additions of raspberries [2].
Fruit juice can also be added at bottling time and is usually used as the priming sugar source when this is done. This is considered an advanced technique that requires knowledge of the amount of sugar in the juice. The brewer should calculate the amount of sugar that is in the fruit juice and how much fruit juice should be used so that over-carbonation does not become a problem.
Fruit can be added at any other point in the brewing process as well. For example, some brewers have tried adding fruit to the mash, boil, or during primary fermentation. Adding fruit this early in the brewing process generally results in less fruit character. Some fruits might benefit from these different approaches, such as citrus based fruits being added in the boil (see the Usage Suggestions below).
Pasteurizing fruit is optional if the beer is a mixed fermentation beer (contains living Brettanomyces). Generally, the low pH, alcohol, and hops will prevent the growth of any microbes on the fruit. there is a possibility of wild yeast living on the fruit potentially adding to the character of the beer. If this is not desired, for example for kettle sours where the brewer does not want to risk contamination of their cold side equipment, the fruit can be pasteurized or the brewer can use a pasteurized fruit product such as a puree or juice. For tips on pasteurizing fruit, see this AHA article. For more information on the forms of fruit (puree, juice, whole, etc.) and various concerns/approaches to using those forms, see the Forms of Fruit below.
For how long to age the beer on fruit, see Aging Vessels and Refermentation and Usage Suggestions contact time below.
Aging Vessels and Refermentation
Aging Vessels
(In progress)
In general, the fruit is added to a new vessel of some sort, and the beer is gently transferred to this new vessel to rest on the fruit for the determined re-fermentation time. Some homebrewers will also dump fruit directly into the primary fermenter itself. This can be a challenge in regards to minimising oxygen due to splashing and physically getting fruit into certain types of fermenters such as glass carboys that have a small opening. For homebrewers, vessels such as plastic buckets are a good option because fruit can easily be added and removed afterwards. When racking beers to another vessel, the vessel should be purged with CO2 if possible, although this isn't always necessary (if the beer does not seem to contain a lot of acetic acid or ethyl acetate, purging the oxygen may not be needed). The vessel should be cleaned and sanitized before hand, although for some brewers sanitizing tanks isn't always necessary for mixed fermentation sour beers since that environment really only allows Brettanomyces and some lactic acid bacteria to thrive (which are already in the beer). there should be about
For commercial brewers, having a screen of some sort at the bottom of the vessel is beneficial for helping to separate the fruit material from the beer after the aging. For example, Funk Factory Geuzeria built a tap and stainless screen for aging sour beer on fruit in an oak barrel. Some brewers also use IBC Totes for aging beer on fruit. Puree or juice can easily be added directly to an oak barrel, but there must be enough room for the fruit and the re-fermentation.
(To do: add info from this thread: https://www.facebook.com/groups/MilkTheFunk/permalink/1770502506311289/)
Refermentation
Whenever fruit is added to a a beer that hasn't been pasteurized, a re-fermentation will occur because new sugars from the fruit are introduced to the microbes that are still alive in the beer. This re-fermentation can take some time to being, and some time to finish, depending on the beer. In general, the fruit should be allowed to finish fermenting before packaging.
When adding fruit to a non-pasteurized beer that does not contain living Brettanomyces but does contain living S. cerevisiae (for example, kettle sours), a re-fermentation will often occur a day or two after adding the fruit. This re-fermentation can last 1-2 weeks until the sugars from the fruit are fermented. Sours such as kettle sours that do not contain living Brettanomyces can be treated like adding fruit to any other type of "clean" beer (see this article, for example). Beers that are fully pasteurized, for example from a flash pasteurizer, or aged for longer than 6 months or so, will not re-ferment the fruit because all of the yeast is dead.
Things change a little when adding fruit to aged sours that contain living Brettanomyces. When adding fruit to an aged, non-pasteurized sour beer that contains Brettanomyces, a secondary fermentation will generally occur after a few days of adding the fruit, and will generally last 1-2 months (see contact times below). A seven-day lag time is not unheard of, as this follows the growth cycle of many Brettanomyces strains. The visual indicators of this fermentation will depend on the strain(s) of Brettanomyces and other microbes that have survived the previous aging process, and can range from active fermentation to developing a pellicle to having no visual fermentation at all. Active fruit fermentation may cause fruit particles to clog the airlock or bung and prevent the vessel from venting pressure. This may cause the airlock to shoot off or worse. The Rare Barrel prevents this problem in vigorously re-fermenting beers by stabling foil over the bung holes of barrels of actively fermenting fruit beer rather than using a bung[3] (~52 minutes in). Raf Soef uses stainless mesh from a tea ball on the bottom of bungs to prevent fruit pieces from clogging the bung or airlock [4]. Raf also suggests filling only 80% of the capacity of the vessel with fruit and beer, and then topping up after the re-fermentation of the fruit [5].
When using whole fruit, it is typical for the fruit to be carried to and held at the top of the fermenter due to carbonation. Some producers have voiced concern over the fruit sitting for prolonged periods of time in contact with air and prefer to push the fruit cap down periodically (and to ferment in such a vessel as to allow this)[3] (~40 minutes in). If you are fermenting in carboys and feel that you are getting acetic character from the fruit cap being in contact with air you can swirl the carboy periodically. Note that many who have used whole fruit have not noticed any problem with a fruit cap being in contact with air, so you may or may not find that this is a concern for you[6].
Forms of Fruit
(in progress)
Fruit is available to the brewer in multiple different forms.
- Whole or sliced fresh - Use a CO2-purged keg or minimize headspace in a carboy. Mold and acetic acid bacteria can grow on the skins of floating fruit [7]. Brettanomyces can also produce acetic acid in the presence of O2, and it is possible that this is the source of acetic acid sometimes found in beers with floating fruit rather than acetic acid bacteria. Some brewers like to swirl the fermenter every few days or to keep the alcohol in contact with the fruit, though some others report no ill effects from not swirling the fermenter (and this is impractical in commercial settings). If using a barrel or larger fermenter, you may try using a punch-down technique. If punching down the fruit, purge the headspace of the vessel with CO2 to avoid oxygen exposure to the beer. Allow the fruit to get fully or possibly even over-ripe (not rotten) for best flavor. Whole fruit may take longer to ferment but it also can give the most complexity [8]
- Whole or sliced frozen - Bulk freezing fruit has a few main potential benefits. First, freezing fruit helps to break down cell walls, which may make the fruit easier to access for yeast and bacteria in the beer [9]. Freezing fruit can also knock back the microbes present on the fruit. Note however that freezing does not kill all the microbes on the fruit. Finally, freezing fruit allows the brewer (especially the homebrewer) to take advantage of local and seasonal fruits when they may not have a use ready for those fruits in season. Frozen fruits are also available as IQF, or individually quick frozen fruit. IQF fruit is frozen but each berry is distinct rather than a single frozen mass. This allows for easier handling, helps prevent clumping, makes for easier fitting of fruit into small openings in carboys or barrels, and allows screening and removal of bad looking fruit. The cell walls of IQF fruit are less broken down than bulk frozen fruit, so there might be a slower extraction rate when using IQF [10]. Defrost frozen fruit in the microwave or in the fridge over night. The fruit doesn't necessarily have to come all the way up to cellaring or room temperature. Adding frozen fruit without thawing it first is probably fine as well. The beer and frozen fruit will come back up to ambient temperatures over night [11].
- Pureed fresh - pureeing fresh fruit has the benefit of extracting the fruit flavor faster. It also sinks to the bottom of the fermenter [12], so the problem of floating whole fruit is avoided. Puree can be difficult to rack the beer off of, and more beer may be lost compared to using whole fruit. Some brewers choose to heat pasteurize freshly made puree.
- Aseptic puree - Same as "Pureed Fresh", but has already been pasteurized. This is usually the case for commercially available puree. We recommend Oregon Specialty Fruit or The Perfect Puree for quality commercial puree. These purees often have antioxidants such as citric and absorbic acids, cane sugar, and other juices added to them [13]. Check the ingredients list of any product before ordering it. Much like fresh purees, aseptic purees or pulps may result in a fair amount of volume loss at packaging, and some puree making it into the final package can be problematic for gushing [14]. See the Oregon Fruit webpage for tips on usage amounts and how to use puree for brewing (they recommend 1/2 to 2 pounds of puree per gallon of finished beer).
- Concentrates and extracts - Concentrates can lose aromatics due to the process, and are generally not as recommended. However, some manufacturers such as Kings Orchards uses a process that reintroduces the aroma back into the concentrate [7]. Other manufacturers have been reported to produce high quality concentrates, such as Coloma. Some brewers use concentrates/extracts blended with puree or whole fruit. See this MTF thread for a discussion on the benefits of using concentrates. Extracts tend to be more singular in flavor, and combining different extracts from different companies has been suggested (or blending extract with real fruit/puree to help boost the flavor of certain fruits such as blueberries).
- Juice - Make sure there is no sugar or preservatives added [7]. R.W. Knudsen and Lakewood Organic brand juices have been recommended if available [15][16]. Juice ferments out faster than whole fruit. This gives the advantage of being able to add a little bit at a time to the secondary fermenter, and being able to add to taste.
- Dried/Dehydrated - Make sure they are oil and sulfur free. Oils can be considered a processing aid, and don't have to be listed on the ingredients list.
- Zest - the zest (outer layer) of citrus fruit is often used in beer. It is often added to the end of the boil, but tinctures can also be made and added after or during fermentation, or citrus zest can be added to the beer directly. See this MTF thread for tips on sources for zest.
Fruit varieties and usage suggestions
Specific notes on select fruit varieties
- Apples - Orchard apples often contain interesting wild yeasts and bacteria, and can be chopped and added directly into secondary; do not pasteurize or freeze for maximum microbial potential [17].
- Apricots - Apricot pits contain a cyanide precursor, though unpitted apricots, and sometimes exclusively the pits (e.g Cascade Noyaux) are used with success in beer. This would suggest that the amount of cyanide in pits is likely low enough to be ok [18], and that the pits may add a certain character that some brewers desire. If you are concerned about it, then do not use apricot pits. Cantillon reports limiting the contact time of their lambic with apricots for 8 weeks, otherwise the beer becomes too acidic. This may be due to microbes living on the apricot skins and is likely not due to acids in the apricots themselves. Cantillon uses 2/3 pitted and 1/3 unpitted apricots [19].
- Autumn Olive - This is a shrub producing small tart fruits native to Asia and found naturalized in eastern US (though it is considered invasive).
- Black Currants - Finding black currant juice without added sugar can be difficult because of the juice’s high acidity. Keep this in mind when tasting the juice, as the amount of added acidity after refermentation can make the beer unpalatable [20].
- Blackberries - Adds citric acidity; milder flavor compared to raspberries. Works well mixed with cherries. Can also add a lot of tannin character to a beer [21].
- Cherries - Both sweet and sour varieties of cherries are available. Generally sour cherries are used in beer. They are more difficult to find and to source some you may need to look into smaller local farmers or frozen or juice options. Varieties of sour cherries include Schaerbeekse (traditional in lambic), Montmorency, Balaton, Morello and Amarelle. The stones also produce some character and can add to the beer, so you may want to consider leaving the pits in with some or all of the fruit. Cherry pits also have a cyanide precursor (see Apricot, above); however given the success of many brewers using whole cherries in beer for decades or more, the levels of cyanide precursor in cherry stones may not be an issue. If you are concerned about it, then remove the stones from cherries when using whole fruit. See Glycosides for more information.
- Cranberries - Consider adding a some raspberries to go with the cranberries for added complexity [22].
- Elderberries - Avoid using underripe elderberries (and elderberry leaves); they may contain cyanide precursors [23]. Elderberries are very strong flavored [24]. See also WV Elderberries Wine Farm for information on elderberry harvesting.
- Fuyu Persimmon - Works well with fruity Brettanomyces character. Allow fruit to get overripe, and then squeeze the fruit to remove from the skins, and press the flesh through a sieve to remove the seeds [25].
- Grapefruit - Can be combined with zest (as can other citrus fruits). Use 5-10 grams of zest for ~5 gallons. Some prefer pink grapefruit [26].
- Grapes - Wine grapes are preferable for their depth of flavor compared to table grapes. Consider both the influence of the juice of the fruit as well as the potential to pull tannins and flavor/aroma from skins. Some homebrewers have experimented successfully with blending finished wine with beers, and for many brewers you will have much easier access to good wine than good wine grapes [27] [28]. If you are interested in sourcing quality grapes and you live in a wine region, make friends with your local wineries. It will probably be good for you even if grape requests do not bear fruit (see what I did there, that was pretty funny).
- Bryan of Sui Generis Blog discusses fermenting with wild North American grapes.
- Funk Factory's "Cervino" and associated MTF thread.
- Winemaker Dara Rae ferments wines with B. anomala, and other cross overs between sour beer and wine.
- Thread on using wine grapes in sour beer, with links to other MTF threads.
- Jeff Porn of Atom Brewing Company's simple method of removing stems from grapes.
- Kiwi - Peel and dice or slice; optionally freeze. Leave out skins [20].
- Kumquat - Can get too bitter if too many are used. It doesn't take much to get a nice citrus and rind character [26].
- Loquot - Leave out pits.
- Lychee - Not much yield when using whole fruit. Difficult to work with because it has a tough rind and large seed. Flavor can be subtle. Recommended to use juice or puree instead of whole fruit [29].
- Passion fruit - When using whole fruit, use the pulp only. Whole passion fruit can be expensive, so puree or pulp is a good option. Goya Fruta brand has been recommended at 1 package per gallon, and can be found at world markets (Asian and Latino groceries) [30].
- Paw Paw - It can be burdensome to remove the flesh from the skins and seeds by hand. MTFer Mark W. recommends using a potato ricer for this [31].
- Pineapple - Leave the skins out.
- Prickly Pear - Difficult to process. Some advise burning the hairs off and leaving on the skins, however the skins may contribute a slight "pithy" character (some brewers report getting no pithy character by leaving on the skins). Some brewers blend into a puree, and use a food processor to remove the seeds. Others use a press to press out the juice and leave the skins/seeds behind. Others advise to cut them up, add a cup of water, and bring them up to 180°F, and then use a potato masher to mash them up. Hang in a hop sack to drain over night. They are high in pectin and mucilage, so using pectinase to help with clarity is an option (see using pectinase instructions below) [32][33].
- Quince - Very aromatic, but also has pectin haze. Also able to be used are Japanese flowering quince (Chaenomeles) [20].
- Raspberries - Advice: use a fine-mesh bag for whole fruit or a fine-mesh strainer for puree since seeds/skins may not settle even with extended aging. Frozen products tend to be more consistent than fresh [20]. Raspberries can pair well with both pale and darker sour beers.
- Rose hips - dried forms can just be added without processing. Some recommend to freeze, boil and strain the rose hips (especially if sanitary conditions are required). Although they may not make a large impact on flavor, removing the seeds is recommended for avoiding extra beer loss, and they reportedly become very "gooey" [34]. See also this youtube video on removing the seeds.
- Sea Buckthorn - Adds a lot of acidity; add less to more sour beers. Juicing tends to be the most popular approach. See quantities below [35].
- Sumac - Provides a lot of "lemony" acidity. Can boil it, but don't boil for too long or the nice red color will turn brown.
- Strawberry - It is thought that the seeds might carry a lot of p-coumaric acid, which can transform into 4-vinylphenol and 4-ethylphenol in the presence of Brettanomyces, which tastes like plastic. Some people have had luck juicing strawberries and removing any seed or vegetal material (or using strawberry juice) to avoid plastic flavors [36][37]. To remove pulp and seeds, MTF members have advised using a flotte lotte, basket press, or Breville Juice Fountain Elite juicer [38].
- Tamarind - Provides an umami flavor that some people might not like [20].
- Vanilla Fruit (Beans/Extract) - Organic/natural recommended for extract. Start at 1 teaspoon per 5 gallons of beer, and add more to taste. For whole beans, cut long ways and scrape out the insides, add entire bean. Balances well with acidity, and some have reported that it adds some mouthfeel to Brettanomyces based beers [39][40].
- Watermelon - Watermelon flavor can be difficult to achieve. Jeffrey Airman of Paradox Brewing Co. uses fresh watermelon with the rind, and supplements with a lot of juice [41]. Steph Cope of CraftHaus Brewing Co used 10 large watermelons/3bbls of kettle soured gose. An immersion blender was used to pulverize; it took a long time for that much watermelon to drop clear, and low yield (but strong watermelon flavor) [42]. Thomas Morley recommends that the watermelon pulp be filtered out to avoid the cloudiness issues (Jester King uses a press [43]) [44]. James Sites advises juicing the watermelon, then reducing it to remove the water content [45]. Bob Sylvester advises using an "overwhelming amount" of watermelon, and using some of the rind to bolster the flavor [46].
- Yuzu - Juice form can be very strong. Taste first. Start with 1 ounce per gallon, and add more to taste [47].
Usage Suggestions
"Contact time" in the table below is for mixed fermentations with Brettanomyces. Kettle sours or beers that do not contain live Brettanomyces can have a much shorter fruit contact time (generally 1-2 weeks). All contact times are assumed to be applied in secondary, and at the end of aging. Keep in mind that this is just a general guideline for usage amounts. Brewers should consider their base beer's characteristics such as abv, flavor profile, acidity levels, etc. when considering how much fruit to add. It is common for lambic brewers to age much higher fruit to beer ratios and then blend back with unfruited lambic to the desired g/L amount. If you are really trying to nail the perfect fruit amount, applying this sort of technique could be useful (assuming you have suitable beers around to blend back). This will allow you to try different blend ratios to determine the appropriate amount of fruit for your beer and desired outcome. In regard to fruit ratios, Belgians calculate fruit ratios by : Fruit ratio (g/l) = (KG of Fruit / (KG of fruit + liters of beer))*1000 [48]. Maintain a temperature range from 65-75°F (18-24°C) during the fermentation of the fruit if possible, however temperature swings during fruit fermentation are generally more forgivable than when temperatures swing during primary fermentation.
Fruit displacement isn't a huge concern; 10 pounds of fruit generally requires an extra gallon of head space (the exact volume depends on the volume of the fruit [49]). However, the fruit will usually re-ferment, causing a blow off, so allowing for extra headspace is a good idea. This site might assist with calculating the displacement volume of fruit.
Fruit can be used for a 2nd steeping and second use of fruit can still provide flavor and color, but in a more subdued way than first use. Both Jester King and the Rare Barrel use fruit more than once, and Jester King reports preferring their second use fruit beers to their first due to more subtlety and balance[50] (~15 minutes in). Other breweries, including Cantillon[51], The Bruery, and Upright[52], also report multiple conducting steepings of fruit, at least at one point if not currently.
Jay Goodwin from The Rare Barrel suggests using 42 lbs/oak barrel (0.7 lbs/gallon) as a good starting point for fruit puree [53] (~22 minutes in).
Don't be afraid to experiment outside of these guidelines.
- Click here and comment on the MTF thread to add your recommendations to this wiki!
- Click here to convert pounds per gallon to grams per liter.
Fruit | Juice | Concentrate | Purée | Dried | Whole | Contact Time | Commercial Examples |
---|---|---|---|---|---|---|---|
Apple | 0.5 lb/gal [20] | 1-2 lb/gal [17] | 6-8 weeks | ||||
Apricot | 0.75 lbs/gal[50] (~56 minutes in) | 1-2.5 lbs/gal | 6-8 weeks | 300 g/l (2.5 lbs/gal) Cantillon Fou Foune - 2/3 pits, 1/3 unpitted - max 8 weeks contact time [19] | |||
Autumn Olive (Autumn Fruit) | 1-1.5 lbs/gal [20] | 2 lbs/gal [20] | 6-8 weeks | ||||
Black Currant | 24-36 fl oz/gal [20] | 3 weeks juice/6-8 weeks whole | |||||
Blackberry | 0.7-3 lbs/gal [20] | 6-8 weeks | 350 g/l (2.9 lb/gal) Tilquin Mure | ||||
Blueberry | 2[54]-3 lbs/gal | 6-8 weeks | |||||
Cantaloupe | 0.5 lb/gal [20] | 6-8 weeks | |||||
Cherry (Tart) | 12-24 fl oz/gal | 4-8 fl oz/gal [20] | 2+ lb/gal [55] | 0.5-1.5 lbs/gal [56] | 1-3.3 lbs/gal | 3 weeks juice/6-8 weeks whole [20]. Lambic brewers/blenders sometimes age longer (6-12 months)[1] | 200 g/l (1.67 lbs/gal) Cantillon Kriek, 300 g/l (2.5 lbs/gal) Cantillon Lou Pepe Kriek, Oud Beersel Oude Kriek, 400 g/l (3.33 lb/gal) |
Clementine | 1 lb/gal [26] | 5 weeks [26] | |||||
Coconut | |||||||
Cranberry | 32 fl oz/5 gal [57] | 1 lb/gal [22] | 6-8 weeks | ||||
Elderberry | 0.5 lbs/gal [20][24] | 6-8 weeks | |||||
Fuyu Persimmons | 2.5 lbs/gal [20] | 12 weeks [20] | |||||
Grape (Table) | |||||||
Grape (Wine) | 2-3 lbs/gallon | 300 g/l (2.5 lbs/gal) Cantillon St. Lamvinus and Vigneronne | |||||
Grapefruit | 3.5-5.5 fl oz/gal [26] | ||||||
Guava | 1-2 lbs/gal [20] | 6-8 weeks | |||||
Key Lime | 100mL/gal [58] | Added as priming sugar at bottling | |||||
Kiwi | 2 lbs/gal [20] | 6-8 weeks | |||||
Kumquat | 0.25-0.60 lbs/gal [26] | 6-8 weeks | |||||
Loquat | 2 lbs/gal | 6-8 weeks | |||||
Mango | 18 fl oz / gal [14] (note that this resulted in significant loss of beer volume); 2 lbs/gal | 6-8 weeks | |||||
Nectarine | 1-2 lbs/gal | 6-8 weeks | |||||
Olallieberries | 3 pounds per gallon (maybe on the higher side but good)[59] [60] | 2 months [59] | |||||
Passion Fruit | 250-500mL per 5 gal [61] | 0.5-1 lbs/gal [62][63] | 6-8 weeks | ||||
Paw Paw (pawpaw) | >1 lb/gal (flesh only) [64] | > 2 weeks (at ~1lb/gal)[64] | |||||
Peach | 0.5-2 lb/gal [20] | 1-2 lbs/gal | 6-8 weeks | ||||
Pear | 6-8 weeks | ||||||
Persian Lime (loomi/dried lime/black lime) | ~1 lime per gallon, or less [65][66] | One quarter added during boil, rest added to secondary for 6-8 weeks (or all added to late boil, or all added to secondary) | Upright Brewing Saison Vert. | ||||
Pineapple | 1 pineapple/gal [20] | 6-8 weeks | |||||
Plum | 2-3 lbs/gal[67] | Some prefer shorter contact (1-2 weeks) and higher rate, others suggest longer contact (3+ months) and lower fruiting rates[67] | 250g/l (2 lbs/gallon) Tilquin Quetsche (contact time of 4 months)[68] | ||||
Pomegranate | 8-13 fl oz/gal [20][69] | 6-8 weeks | |||||
Prickly Pear | 0.5 lb/gal [20] | 6-8 weeks | |||||
Quince | 2 lb/gal [20] | 6-8 weeks | |||||
Raspberry | 1-2.5 lbs/gal | 6-8 weeks | 200 g/l (1.67 lbs/gal) Cantillon Rose de Gambrinus, 300 g/l (2.5 lbs/gal) Cantillon Lou Pepe Framboise | ||||
Rhubarb | 0.5-1.0 lb/gal [20][70] | 6-8 weeks | |||||
Rose Hips | 2oz/5gal (flameout) [71] | bottling time (secondary) | |||||
Salmonberries | 1 lbs/gal [72] | 6-8 weeks | |||||
Sea Buckthorn | 2-8 grams/liter of fruit before juicing [35] | 6-8 weeks | |||||
Strawberry | 0.5-1 lbs/gal [20] | 2-3 lbs/gal | 6-8 weeks | ||||
Strawberry Guava | 3 lbs/gal (blend down if needed) [73] | 6-8 weeks | Lanikai Brewing Company's Forever Summer. Strawberry guava is added on hot side when other fruits are used, or cold side when not. Remove seeds and skin [73]. | ||||
Vanilla Fruit (Beans) [39] | (Extract) 2 teaspoons/5 gal | (Whole pods) 1/2-2 beans per 5 gal | Rare Barrel Home Sour Home | ||||
Watermelon | 40-64 fl oz/gal [20][44] | 6-8 weeks | Jester King Hibernal Dichotomous (12% watermelon juice [43]), and another beer rumored to use 30% fresh watermelon juice [44]. | ||||
Yuzu (citrus) | 1-5 oz/5gal [47][74] | ~2 lbs/5 gal [47] | Added at packaging | ||||
Zante Currant | 5-10 fl oz/gal | 0.2-0.4 lbs/gal | 4-8 months [75] |
Removing fruit
(In Progress) Once your fruit beer has reached the character you desire, you will want to remove the beer to a packaging/further aging vessel or to a final package while leaving the fruit behind. Depending on the type and form of fruit you used, this can be a challenging task. Juices should not present a problem and purees will generally settle out. Larger chunks or whole fruits (fresh, frozen, or dried) may be more easily avoidable however some fruits, such as raspberries, tend to disintegrate and can be especially troublesome. Link to this MTF post
Filtering and Removing Haze
Over time, most beer will clear eventually. However, there are methods for clearing fruited beer quicker and perhaps to a greater degree than natural conditioning.
Filtering
Some types of fruit and/or brewing systems may require filtering. One option is to use a filter, such as a GW Kent Lenticular Filter Housing, a steel housing bag filter, or an inline filter. If a filter like this is going to be used as the primary filter, it is advised to use two that can be split off so that one can be cleaned while the other continues to run (see this MTF thread showing Casey Brewing's setup). On a homebrew level, using any system that is designed to filter dry hops from the fermenter should also work for filtering fruit. Examples include using a fine mesh bag on either the receiving or exiting end of a siphon, using a 300 micron stainless steel "Dry Hopper for Glass Carboys" which fits over the receiving end of most homebrew auto-siphons, or a corny keg dip tube screen (also fits on steel racking canes [76]). Filtering may not remove haze from pectin. Some brewers believe that pectinase can help with getting the fruit to separate from the beer [77]. For filtering fruit that has been added directly to a barrel, Brandon Jones advises securing a stainless steel scrubby to the end of a barrel racking cane using a stainless worm clamp [78].
See also Nate Ferguson's guide to filters for commercial brewers (pending an actual write up for the wiki).
Removing Haze
Different types of fruit contain differing levels of pectin, which cause haze. One option, and perhaps the preferred option for both commercial and homebrewers, is to use pectic enzyme (more formally called pectinase). Pectic enzyme is available from brewing supply retailers, and is available in both powdered and liquid format. The liquid format tends to be easier to use, and requires less of it to work. Add the pectic enzyme when adding the fruit (before re-fermentation of the fruit) if possible, but the pectic enzyme can be added after the fruit ferments as well. Pectic enzyme is sensitive to ethyl alcohol, so a 50-100% increase in the dosage that the manufacturer recommends may be needed when adding it to an alcoholic beverage. Using this much pectic enzyme should not contribute a flavor difference or impact the health safety of the beer. The beer should clear in a matter of weeks at the most [79]. Some brewers believe that the use of pectinase also helps improve the quality of the fruit flavor [77].
Another option is to try to use BSG Biofine® Clear after the beer has fully extracted the fruit. Be sure to cold crash the beer down as close to 0°C as possible when using this product. Use a higher dosage if the beer is not clarifying. This product should produce clear beer in most circumstances, however there have been reports of it not clearing up pectic haze [80].
See Also
Additional Articles on MTF Wiki
External Resources
- Table of fruits with starting gravities, TA, pH, and tannin.
- Phenol Explorer website for various foods.
- Approximate pH of some fruits and vegetables.
- Shaun Hill's advise on using International Citrus Units to measure fruit additions.
- Beer and Wine Journal Table of Fruits with water, sugar, and acid percentage.
- Another table of water and sugar percentages of various fruits.
- Brix readings of different fruits.
- Food Volume to Weight Conversions (assisting with determining volume displacement of fruit).
- Tips from Chad Yakobson of Crooked Stave, Walt Dickinson of Wicked Weed, and Jeffrey Stuffings of Jester King.
- MTF Thread on adding wine to beer (homebrew).
- "Punch Down Beer", blog article on Funk Factory Guezeria on fruiting in an upright barrel and punching down fruit.
- "A Guide to Blending Sour Beer With Fruit" by Matt Miller; includes ABV and TA calculators for fruit additions.
References
- ↑ Jump up to: 1.0 1.1 Raf Soef. Milk The Funk Facebook group. 04/08/2017.
- Jump up ↑ "Framboise de Amorosa". The Lost Abbey website. Retrieved 07/26/2017.
- ↑ Jump up to: 3.0 3.1 The Sour Hour #14: with Jester King, pt. 1
- Jump up ↑ Raf Soef's tea strainer modification
- Jump up ↑ Conversation with Raf Soef on MTF regarding re-fermentation of fruit and dealing with blow off. 11/30/2015.
- Jump up ↑ MTF facebook thread about fruit caps
- ↑ Jump up to: 7.0 7.1 7.2 Conversation with Kyle Kohlmorgen on MTF regarding fruit. 10/23/2015.
- Jump up ↑ Thoughts from Raf Soef on using whole fruit in a MTF thread
- Jump up ↑ "Effects of freezing and thawing on texture, microstructure and cell wall composition changes in papaya tissues." Phothiset S, Charoenrein S. 2014.
- Jump up ↑ Conversation about freezing fruit on MTF. 05/10/2016.
- Jump up ↑ Conversation with Devin Bell on MTF. 01/17/2016.
- Jump up ↑ Conversation with Dara Rae on MTF regarding puree. 11/1/2015.
- Jump up ↑ Conversation with Ehren Schmidt about Perfect Purees having cane sugar and acids added to them on MTF. 05/18/2016.
- ↑ Jump up to: 14.0 14.1 Adi mango pulp discussion
- Jump up ↑ Pomegranate Margarita Gose. Ale of the Riverwards Blog. Ed Coffey. 11/13/2015. Retrieved 11/19/2015.
- Jump up ↑ MTF Thread on Lakewood Juice. 03/07/2016.
- ↑ Jump up to: 17.0 17.1 Conversation with Aiden Robert Jönsson regarding using apples on MTF. 06/01/2016.
- Jump up ↑ MTF conversation about cyanide in stones
- ↑ Jump up to: 19.0 19.1 Private conversation between Jean Van Roy and Richard Sigesmund.
- ↑ Jump up to: 20.00 20.01 20.02 20.03 20.04 20.05 20.06 20.07 20.08 20.09 20.10 20.11 20.12 20.13 20.14 20.15 20.16 20.17 20.18 20.19 20.20 20.21 20.22 20.23 20.24 20.25 Conversation on MTF about adding fruit to sour beer. 10/23/2015.
- Jump up ↑ Thread on MTF regarding blackberries and tannins. 08/16/2016.
- ↑ Jump up to: 22.0 22.1 Conversation with Dustin Carver on MTF for cranberry usage. 11/16/2015.
- Jump up ↑ "Searching for cyanide". Nordic Food Lab. 09/05/2013. Retrieved 07/27/2016.
- ↑ Jump up to: 24.0 24.1 Mike Karnowski and Josh Hockley. Milk The Funk Facebook group post on elderberry usage. 09/24/2017.
- Jump up ↑ [https://www.facebook.com/groups/MilkTheFunk/permalink/1886948014666737/?comment_id=1887134124648126&/reply_comment_id=1887137797981092&comment_tracking=%7B%22tn%22%3A%22R5%22%7D DeWayne Schaaf. MTF thread on persimmons. 11/17/2017.[
- ↑ Jump up to: 26.0 26.1 26.2 26.3 26.4 26.5 Conversation with Derek Springer, Murray Sharp, Steve Holat, Brandon Jones, and Dara Rae on MTF. 01/21/2016.
- Jump up ↑ Mad Fermentationist blending wine and lambic
- Jump up ↑ Mad Fermentationist New Zealand saison
- Jump up ↑ Conversation about lychee fruit on MTF. 04/14/2016.
- Jump up ↑ Passion fruit recommendation from Alex Aguillon. 11/13/2016.
- Jump up ↑ Paw Paw discussion on MTF FB page
- Jump up ↑ Conversation on MTF on prickly pear fruit. 02/20/2017.
- Jump up ↑ Conversation about prickly pear fruit on MTF. 09/17/2016.
- Jump up ↑ Bjarte Nataas. MilkThe Funk post on preparing rose hips. 09/09/2017.
- ↑ Jump up to: 35.0 35.1 MTF tips by Brett Ellis and Stephen Andrews on Sea Buckthorn usage. 08/29/2017.
- Jump up ↑ Discussion with James Sites on MTF regarding strawberries and 4EP precursor. 05/09/2016.
- Jump up ↑ Conversation with Kyle Pittser on MTF regarding the use of strawberries. 03/01/2017.
- Jump up ↑ Ingo Janssen, Thomas Creighton, and Ryan Adam Bickley. Milk The Funk Facebook group. 03/24/2017.
- ↑ Jump up to: 39.0 39.1 MTF thread recommendations by Nathan Peck, James Sites, Justin Amaral, Dustin Carver, and Rodney Beagle. 12/8/2016.
- Jump up ↑ Milk The Funk Facebook thread on vanilla beans. 03/05/2017.
- Jump up ↑ Conversation with Jeffrey Airman on watermelon use. 06/03/2016.
- Jump up ↑ Conversation with Steph Cope on watermelon usage. 06/03/2016.
- ↑ Jump up to: 43.0 43.1 "Introducing Jester King Hibernal Dichotomous". Jester King's Blog. Retrieved 11/13/2016.
- ↑ Jump up to: 44.0 44.1 44.2 Conversation with Thomas Morley about watermelon usage. 11/12/2016.
- Jump up ↑ Conversation with James Sites on watermelon usage. 05/06/2016.
- Jump up ↑ Sylvester, Bob. Milk The Funk Facebook group. 03/31/2017.
- ↑ Jump up to: 47.0 47.1 47.2 Conversation with Matt Bing and Dennis Lovelock on MTF. 01/28/2016.
- Jump up ↑ MTF Facebook comment from Raf about fruiting ratios
- Jump up ↑ Displacement (fluid). Wikipedia. Retrieved 05/05/2016.
- ↑ Jump up to: 50.0 50.1 Sour Hour episode 15 - Jester King pt. 2
- Jump up ↑ Cantillon Kriek
- Jump up ↑ Upright Special Herbs
- Jump up ↑ The Sour Hour episode 10
- Jump up ↑ Steve R on MTF facebook page
- Jump up ↑ Zinn, Andrew. Milk The Funk Facebook group. 03/26/2017.
- Jump up ↑ MTF Thread by Eccentric Beekeeper on using dried cherries. 01/16/2016.
- Jump up ↑ Conversation with James Sites on cranberry juice on MTF. 11/17/2015.
- Jump up ↑ Conversation with Richard Preiss on MTF regarding key lime juice. 01/21/2016.
- ↑ Jump up to: 59.0 59.1 MTF_Thread by Trey Rabinek
- Jump up ↑ MTF follow up by Trey Rabinek
- Jump up ↑ Conversation about passion fruit concentrate on MTF. 11/11/2016.
- Jump up ↑ Conversation with Allen Stone on passion fruit usage. 11/12/2016.
- Jump up ↑ Conversation with Manny Jannes and Kristopher Johnson (Green Bench brewer) on passion fruit additions on MTF. 10/22/2015.
- ↑ Jump up to: 64.0 64.1 MTF Paw Paw thread from 8-Sept-2016
- Jump up ↑ Conversation with Caroline Whalen Taggart on MTF regarding Persian limes. 12/06/2016.
- Jump up ↑ Tips from various brewers on using black lime on MTF. 05/07/2017.
- ↑ Jump up to: 67.0 67.1 MTF thread about plums, 14-Sept-2016
- Jump up ↑ Tilquin Facebook Post 22-Sept-15
- Jump up ↑ Ale of the Riverwards Blog by Ed Coffey, Pomegranate Margarita Gose. 11/13/2015.
- Jump up ↑ Mitch Ermatinger, Brian King, Matt Kent. Milk The Funk Facebook group post. 06/08/2017.
- Jump up ↑ Tim Borket. Milk The Funk post on rose hips usage. 09/06/2017.
- Jump up ↑ MTF thread by Kyle Hammock. 01/15/2016.
- ↑ Jump up to: 73.0 73.1 Steve Haumschild on strawberry guava usage. Milk The Funk. 09/04/2017.
- Jump up ↑ Conversation with Doug Stallard on MTF. 05/17/2016.]
- Jump up ↑ Russian River Consecration Description. Retrieved 10/21/2015.
- Jump up ↑ Matthew Smylie. Thread on MTF about filtering fruit. 09/08/2017.
- ↑ Jump up to: 77.0 77.1 Conversation with Alex Loijos and James Sites on pectinase usage. 08/17/2016.
- Jump up ↑ Brandon Jones. Milk THe Funk Facebook group. 07/11/2017.
- Jump up ↑ Conversation with James Sites and Nick Moench on MTF. 04/15/2016.
- Jump up ↑ Conversation with Ehren Schmidt and Daniel Addey Jibb on MTF. 04/16/2016.