View source for Eccentric Beekeeper Sampling Syringe and Purging Wand

The '''Eccentric Beekeeper Sampling Syringe''' and '''CO<sub>2</sub> Purging Wand''' are two simple devices for sampling/purging through a 3 piece airlock and for purging any sort of vessel, including those with a small opening, with the goal of minimizing oxygen exposure.  These were discussed on [https://www.milkthefunk.live/podcast/2018/10/8/wiki-kwiki-003-eccentric-beekeeper Milk The Funk "The Podcast" Wiki Kwiki Episode #003].   

==CO<sub>2</sub> Purging Wand==
The CO<sub>2</sub> Purging Wand can be hooked up to Cornelius type ball lock connector.  The stainless steel tubing is available on [https://www.amazon.com/Small-Parts-Stainless-Seamless-Tubing/dp/B007O2NCSO/ref=sr_1_1?ie=UTF8&qid=1540404178&sr=8-1&keywords=stainless+steel+304l+tubing+1%2F4%22 Amazon].  The drive regulator is optional for allowing a very precise flow rate of gas.
<gallery widths="240px" heights="200px">
File:Prugewandparts.jpg|Parts list.
File:Driveregulator.jpg|Drive regulator setup
</gallery>

Demonstration:
: <youtube width="300" height="200">a5fNAJ4Q71M</youtube>

==Sampling Syringe==
The sampling syringe is made up of the same [https://www.amazon.com/Small-Parts-Stainless-Seamless-Tubing/dp/B007O2NCSO/ref=sr_1_1?ie=UTF8&qid=1540404178&sr=8-1&keywords=stainless+steel+304l+tubing+1%2F4%22 stainless steel tubing] attached to a 100 cc plastic syringe with a small section of 1/4" ID, 3/8" OD plastic tubing.

Build and demonstration:
: <youtube width="300" height="200">R_s8ExQhgCE</youtube>

Demonstration with Sanke fermenter (for the sanke Fermenter build, see [[Sanke Fermenter]]):
: <youtube width="300" height="200">HZHTfyDc1zA</youtube>

==See Also==
===Additional Articles on MTF Wiki===
* [[Eccentric Beekeeper Bulldog]]
* [[Sanke Fermenter]]
* [[Mixed_Fermentation#Aging|Mixed Fermentation Aging]]
* [[Barrel]]

===External Resources===

==References==
<references/>

[[Category:Equipment]]