Changes

Producers of spontaneously fermented beer typically do not oxygenate their wort <ref name="Beer Temple interview with De Garde"></ref> (~27 minutes in) and traditional producers conduct fermentation for a long time period (1-3+ years) in wooden vessels. The long fermentation process allows the different microbes present to carry out their slow metabolism of the complex carbohydrates present in the beer, developing the flavors and acidity associated with spontaneous beers <ref name="Van Oevelen et al., 1976">[http://onlinelibrary.wiley.com/doi/10.1002/j.2050-0416.1975.tb06953.x/abstract Van Oevelen et al., 1976. Synthesis of aroma components during the spontaneous fermentation of lambic and gueuze]</ref> <ref name="Spaepen et al., 1978">[http://onlinelibrary.wiley.com/doi/10.1002/j.2050-0416.1978.tb03888.x/abstract Spaepen et al., 1978. Fatty acids and esters produced during the spontaneous fermentation of lambic and gueuze]</ref>. The wooden fermentation vessels are frequently oak wine barrels in the 220-400 L (58-105 gal) range but other woods such as chestnut are used and the vessels may also be large tuns or foudres holding upwards of 45 HL (about 1200 gal, or about 34 bbl). These barrels provide two primary benefits for the fermentation - they allow a small amount of oxygen permeability and they provide a an environment which houses some of the microbes active in the fermentation (notably ''Brettanomyces'', which can penetrate into the wood and in some cases can metabolize compounds present in the wood such as cellobiose, which is produced from toasting of the wood) <ref name="Vinnie on the Session Jan 2010">[http://www.thebrewingnetwork.com/post1940/ Vinnie Cilurzo of Russian River on the Brewing Network's Sunday Session, 17-January-2010]</ref>(~3:22 in). While a controlled micro-oxidation can be beneficial to the beer, too much oxygen exposure can lead to excessive acetic acid and/or ethyl acetate production (either from ''Brettanomyces'' or ''Acetobacter'') (<ref name="yakobson1">[http://www.brettanomycesproject.com/dissertation/pure-culture-fermentation/pure-culture-fermentation-discussion/ Yakobson, Chad. Pure Culture Fermentation Characteristics of Brettanomyces Yeast Species and Their Use in the Brewing Industry. Pure Culture Fermentation Discussion. 2011.]</ref)>. In addition the barrels may provide flavor and structure from tannins and, in some cases, what they previously held.

Regarding fermentation temperature, commercial producers looking for balanced acidity and flavor/aroma complexity prefer cooler fermentation temperatures in the range of the high 50s to low 60s F (~13-18 C) <ref name="Spontaneous Sour Hour">[http://www.thebrewingnetwork.com/membersarchive/sourhour2015_05_wildfriendship.mp3 The Sour Hour Episode 11 with Rob Tod and Jason Perkins from Allagash, Jean Van Roy from Cantillon, and Vinnie Cilurzo from Russian River]</ref> (~1:14 in) (3 Fonteinen had temperature controlled cellars, highlighting the importance of aging temperature. Unfortunately this the temperature control thermostat failed and resulted in the brewery nearly going out of business <ref>[https://www.lambic.info/Brouwerij_3_Fonteinen lambic.info 3F]</ref>). This temperature range allows slow and balanced fermentation by the diverse array of microbes present. Warming the fermentation too much results in enhanced production of acidity which is out of line with what the lambic producer is aiming for. This can be used to the advantage of the brewer when producing certain non-lambic inspired spontaneously fermented beers (see below, [[Spontaneous_Fermentation#Alternative_Applications_of_Spontaneous_Fermentation|Alternative applications of spontaneous fermentation]]).

Frequently a non-trivial amount of beer is dumped at spontaneous beer breweries. The exact amount depends on the conditions of the brewery and the willingness of the brewer to try to blend in batches that might not taste as good and/or have mild off flavors at the expense of the overall quality of the blend, but commercial brewers have reported duping dumping levels of 5% (and possibly up to 15%) of total production <ref name="Beer Temple interview with De Garde">[https://vimeo.com/127084279 The Beer Temple Interviews #264 with Trevor Rogers of De Garde]</ref> (~13 minutes in). This may be due to an imbalance in the microbes <ref name="Beer Temple interview with De Garde"></ref> (~14 minutes in) or a bad barrel resulting in off woody flavor <ref name="Spontaneous Sour Hour" /> (~1:31 in) or excessive O2 exposure. In addition to the beer inside such barrels being dumped, the barrel itself is also often discarded <ref name="Beer Temple interview with De Garde"></ref> (~14 minutes in). Homebrewers who are fermenting spontaneously may expect that from time to time they will need to dump a batch.

During the extended maturation phase, a beer may become "sick" or "ropey", though not all producers get this <ref name="Spontaneous Sour Hour" /> (~1:10 min in) <ref name="Vinnie sour beer talk">[http://www.thebrewingnetwork.com/post1863/ Recording of Vinnie's talk at NHC]</ref> (~1:44 in) <ref name="Vinnie on the Session Jan 2010"/> (~3:44 in). This is the result of exopolysaccaridesexopolysaccharides, which some ''Pediococcus'' strains are known to produce. These exopolysaccharides can be broken down by other microbes present in the beer relieving the beer of its "sickness" (this exopolysaccaride exopolysaccharide breakdown is generally attributed to ''Brettanomyces''). A beer may also become "sick" in the bottle during bottle conditioning. This is likely due to enhanced ''Pediococcus'' activity from additional fermentable sugar, in the form of simple sugars or beer which has not completely attenuated yet <ref name="Vinnie sour beer talk">[http://www.thebrewingnetwork.com/post1863/ Recording of Vinnie's talk at NHC]</ref> (~1:47 in). A beer which is sick in the bottle will generally clear through the same process as a younger aging beer when given appropriate time. See the [[Pediococcus#.22Ropy.22_or_.22Sick.22_Beer|Pediococcus]] page for more information.