13,701
edits
Changes
→Fermentation of Spontaneous Beers
On a homebrew scale a fair amount of attention has been paid to the topic of oxygen permeability in different fermentation vessels and closures <ref>[https://www.homebrewtalk.com/media/raj-apte-o2-table.58958 Raj Apte's oxygen permeability table]</ref> <ref>[http://www.mocon.com/assets/documents/PPS_Article_highq.pdf Better Bottle closure study]</ref> <ref>[https://www.youtube.com/watch?v=boLqmFIzUZ0&list=PLibE2BjPG_8H0IZe4fS2FD4uidCFhgzBn&index=4 Dan's video discussing airlocks and fermenters]</ref>. It has been suggested that sealing a glass carboy with a wooden dowel or chair leg can result in similar oxygen permeability as a wine barrel. Although this was quite a clever idea for replicating oxygen exposure, this is not recommended as it can lead to breakage of the glass carboys <ref name="Mad Fermentationist Oak">[http://www.themadfermentationist.com/2007/02/8-homebrew-barrel.html Mad Fermentationist $8 homebrew barrel]</ref>. While micro-oxygenation may be an important part of some spontaneous production it may be getting too much attention in homebrew carboy conditions <ref name="Mad Fermentationist Oak">[http://www.themadfermentationist.com/2007/02/8-homebrew-barrel.html Mad Fermentationist $8 homebrew barrel]</ref> (see comments) relative to other controls such as temperature, microbes, and time. See the [[Barrel]] page for discussions on the barrels available to homebrewers. Since spontaneous fermentations can take several days to begin (generally 4-7 days, although we have seen reports of up to two weeks), some professional brewers and a microbiologist have recommended that carboys should be filled as close to the neck as possible to limit the initial headspace and oxygen in that headspace so as to avoid [[mold]] growth (lowering the wort pH to under 4.5 will also help prevent mold growth during the early stages of fermentation) <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1247501295278082/?comment_id=1247509875277224&comment_tracking=%7B%22tn%22%3A%22R%22%7D MTF post regarding mold growth in homebrew spontaneous fermentations. 03/06/2016.]</ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1442080252486851/?match=c3BvbnRhbmVvdXMsZmVybWVudGVkLDEwMA%3D%3D MTF post regarding limiting headspace to prevent mold growth. 10/19/2016.]</ref>.
Regarding fermentation temperature, commercial producers looking for balanced acidity and flavor/aroma complexity prefer cooler fermentation temperatures in the range of the high 50s to low 60s F °F (~13-18 Cbetween 10°C and 20°C) <ref name="Spontaneous Sour Hour" /> (~1:14 in)<ref name="Bongaerts_2021" />. Temperature control is very important to some Lambic producers. 3 Fonteinen had temperature controlled cellars, highlighting the importance of aging temperature. Unfortunately the temperature control thermostat failed and resulted in the brewery nearly going out of business <ref>[https://www.lambic.info/Brouwerij_3_Fonteinen lambic.info 3F]</ref>. This temperature range allows slow and balanced fermentation by the diverse array of microbes present. Warming the fermentation too much results in enhanced production of acidity which is out of line with what the lambic producer is aiming for. This can be used to the advantage of the brewer when producing certain non-lambic inspired spontaneously fermented beers (see below, [[Spontaneous_Fermentation#Alternative_Applications_of_Spontaneous_Fermentation|Alternative applications of spontaneous fermentation]]).
American brewers who use coolships for spontaneous fermentation have reported that the success rate for spontaneously fermented beer is around 90-80%. Brewers will often dump undrinkable beers from individual barrels or even beers from barrels that don't meet the expectations of the brewers <ref name="howat_comeandbrewit" />.