13,703
edits
Changes
m
typo
* Use a glass carboy FermWrap™ heater or another carboy heater attached to a sensor thermowell through the cap and a temperature controller.
* Use a Brew Belt Fermentation Heating Belt and wrap a "hoody" sweater or some other fabric around it to insulate, and a temperature controller.
* Use an aquarium heater (Enheim band brand recommended), fill a large plastic cooler with water and keep the water warm with the aquarium heater. Set the souring vessel in the cooler.
* Use an [http://anovaculinary.com/ Anova sous vide device] - place the vessel in a larger vessel with water, and keep the heat applied to the outside water with the Anova. Works well for maintaining heat for starters too.
* Build an insulation box out of Styrofoam. See [https://www.facebook.com/groups/MilkTheFunk/permalink/1429055690455974/?comment_id=1429072997120910&comment_tracking=%7B%22tn%22%3A%22R9%22%7D this MTF post] and [https://www.facebook.com/groups/MilkTheFunk/permalink/1429055690455974/?comment_id=1429344713760405&comment_tracking=%7B%22tn%22%3A%22R4%22%7D this MTF post].