13,701
edits
Changes
→Typical Mash Procedure
==Typical Mash Procedure==
Turbid mashing procedures are outlined well in [http://wwwfunkfactorybrewing.funkfactorygeuzeriablogspot.com/2011/12/cantillon-turbid-mash.html Levi's writeup of Cantillon's procedure] and Wild Brews by Jeff Sparrow (see the [[books]] page). Brewers conducting traditional turbid mashes usually have at least a 4 vessel system: a mash/lauter tun, a kettle to hold turbid wort, a hot liquor tank (or hot water on demand) and a boil kettle to receive the mash runnings. Many different specific turbid mashes may used by varying rest temperatures and the numbers and timings of turbid pulls. This was the case for historic turbid mashing (see, for example, Johnson, 1918<ref name='Johnson 1918'/>). An example of a modern turbid mash based on records and observations of Cantillon's process is as follows:
* The grist, which traditionally in lambic is malted barley and ~30-40% unmalted wheat (see [https://www.facebook.com/groups/MilkTheFunk/permalink/1874873632540842/ this MTF thread for tips for homebrewers and commercial brewers on milling raw wheat]), is doughed to reach a temperature of 45°C (113°F). At this point the mash is very thick.