Changes

'''Coolship''' (the Anglicized version of the Dutch/Flemish ''koelschip'') is a type of fermentation vessel used in the production of beer. Traditionally, a ''coolship'' is a broad, open-top, flat vessel in which wort cools, and . The large surface area in relation to volume allows for relatively efficient cooling. It is also an integral step in the process of making Belgian lambic and other [[Spontaneous_Fermentation|spontaneously fermented beers]]. The high surface to mass ratio allows Historically, coolships were constructed of wood, but later were lined with iron or copper for more efficient coolingbetter thermal conductivity. Most modern constructed coolships are made from stainless steel, although copper coolships are still used in many Belgian lambic breweries as well as a few breweries outside of Belgium. Some Pre-dating the specific application of coolships by Belgian lambic brewers for inoculation during cooling, some German and English brewers also still use copper coolships (''kühlschiff''in German and "cooler" in Great Britain) as chillers to partially cool wort to 55-75°C (131-167°F) before either chilling the wort in a closed system or transferring the hot warm wort to a fermenter to cool and finally pitch yeast, a process which was once common throughout Europe <ref>[http://craftybeergirls.com/2018/03/18/coolship-field-trip/ Lauren Lerch. "Coolship Field Trip". Crafty Beer Girls blog. Retrieved 03/18/2018.]</ref><ref>[http://www.uerige.de/brauerei-brauprozess.html "Malz – aus Gerste und Weizen ". Zum Uerige website. Retrieved 03/18/2018.]</ref>. Contemporary usage also includes using a coolship as an open fermentor for the production of non-sour beer, for example how <ref>[https://www.anchorbrewingfacebook.com/bloggroups/MilkTheFunk/permalink/2814130411948488/Various members of MTF. Milk The Funk thread on the use of coolships in historical German brewing-insights-open-fermentation. 07/28/ Anchor Brewing Co2019.] ferments beer openly (because wort is pre-chilled before entering the vessel, Anchor Steam no longer refers to these as "coolships" but as "open fermenters" </ref><ref>[httpshttp://wwwzythophile.anchorbrewingco.comuk/2019/10/blog18/anchordo-you-gyle-your-ale-after-it-leaves-terminologythe-cooler-and-finishes-fermenting-in-the-vat-or-krausen-your-beer-post-coolship/ "Anchor Terminology: Coolship"-when-its-run-out-of-the-foeder Martyn Cornell. Anchor Steam Zythophile website. 0410/1218/20122019. Retrieved 09retrieved 10/1018/20182019.]</ref>). This article will focus on Saison breweries used coolships during the use of 1800's in a coolship similar fashion to initiate spontaneous fermentation and will not significantly address the use of coolships German brewers to partially cool the wort as in the historically German methods of brewing or to conduct open fermentationbefore pitching yeast <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/2275507945810740/?comment_tracking=%7B%22tn%22%3A%22R%2317%22%7D Georges Lacambre. Dec, 1851. Translated by Lucas Blasty on Milk The Funk Facebook group.]</ref>.

TraditionallyContemporary usage also includes using a coolship as an open fermentor for the production of non-sour beer. For example, ''[https://web.archive.org/web/20220126000613/https://www.anchorbrewing.com/blog/brewing-insights-open-fermentation/ Anchor Brewing Co] fermented beer openly, but because the wort is pre-chilled before entering the vessel, Anchor Brewing no longer refers to these as "coolships'' were constructed " but as "open fermenters" <ref>[https://web.archive.org/web/20230326181248/https://www.anchorbrewing.com/blog/anchor-terminology-coolship/ "Anchor Terminology: Coolship". Anchor Steam website. 04/12/2012. Retrieved 09/10/2018.]</ref>. Contemporary experimental usage of woodcoolships includes allowing wort to cool and become inoculated with microbes from the environment, as well as adding cultured yeast at some point in the process, and optionally using the coolship as an open fermenter to conduct the primary fermentation in rather than conducting the primary fermenation in barrels like in Belgian lambic brewing. This is not considered to be full "spontaneous fermentation" since yeast and/or lactic acid bacteria are added to produce a more controlled fermentation, but later were lined with iron the resulting beer might benefit from or be otherwise altered by the wild microbes or copper for better thermal conductivity. See also the effects of the lack of head pressure/exposure to oxygen caused by cooling (and optionally fermenting) the wort in a coolship <ref>[httphttps://www.milkthefunkfacebook.com/cccgroups/MilkTheFunk/permalink/2987548407940020/ Brandon Jones of Yazoo Brewing Co. Milk The Funk Facebook group thread on using a coolship and pitching Bootleg Biology yeast. 10/18/ MTF Coolship Cooling Calculator2019.]</ref>. See [[Spontaneous_Fermentation#Cooling|Spontaneous Fermentation]] for information on dissolved oxygen A less common practice that has been gaining some traction in wort that the US is cooled overnight using a portable coolship. These coolships are designed to be transported, often in the back of pickup trucks. The coolship should have a baffle that prevents the dangerously hot wort from spilling out of the coolship. The coolshipcan then be transported anywhere to inoculate the wort. See [http://allaboutbeer.com/article/portable-coolships/ this All About Beer Magazine article].

A less common practice that has been gaining some traction in This article will focus on the US is using use of a portable coolship. These to initiate spontaneous fermentation and will not significantly address the use of coolships are designed to be transported, often partially cool wort as in the back German/English/saison methods of pickup trucks. The coolship should have a baffle that prevents the dangerously hot chilling wort from spilling out of the coolship. The coolship can then be transported anywhere or to inoculate the wortconduct open fermentation.  See also the [http://allaboutbeerwww.milkthefunk.com/articleccc/portable-coolships/ this All About Beer Magazine articleMTF Coolship Cooling Calculator]. See [[Spontaneous_Fermentation#Cooling|Spontaneous Fermentation]]for information on dissolved oxygen in wort that is cooled overnight in a coolship.

Abbreviated '''SA:V''', the surface area to volume ratio is the proportion between the surface area of the wort (the dimensions of the wort exposed to the sides of the vessel), and the volume of the wort. The SA:V affects the cooling rate of the wort. In addition to this, the surface area of the top of the vessel which is exposed to air in proportion to the volume of wort potentially affects the inoculation rate of the vessel, although this aspect has not been studied that we are aware of.

* [http://homebrewingfun.blogspot.com/2018/04/update-and-blend-of-spontaneous-beers.html Adam Kielich measures the cooling rate over time of small batches, and reports the results.] See also the associated [https://www.facebook.com/groups/MilkTheFunk/permalink/2094624910565712/ [MTF thread].* [https://www.facebook.com/groups/MilkTheFunk/permalink/3137607142934145/?comment_id=3137680236260169 Andrew Zinn's cooling rate data for a 45bbl coolship, 30 bbl brewhouse.]

This table shows the dimensions of various commercial coolships (sources noted below the table). The volume of the coolships has been calculated from the dimensions, and therefore it is slightly larger than the practical filling volume. Surface area:volume is calculated for the top surface exposed to air for both the maximum fill and the approximate batch sizes as well as the total surface area (including the walls and bottom of the coolship). Some breweries use multiple coolships at once. When multiple identical coolships are used, numbers in parentheses following brewery names indicate the number of coolships used and the volume given is the total combined volume of these coolships. Metric is used so that the calculations are easier. For brewers who prefer ft²:ft³, 10 cm²:L is equal to 0.305 ft²:ft³.

| Black Project (full)<nowiki>***</nowiki> (Closed) || Copper || 13.6 || 21.9 || 24.8 || 68.4 || 12 || 243.8 || 121.9 || 45.7

| Black Project (half) (Closed) || Copper || 6.8 || 21.9 || 24.8 || 76.6 || 6 || 121.9 || 121.9 || 45.7

| Mantra (Closed) || Stainless Steel || 18.9 || 32.8 || 35.2 || 83.1 || 17.6 || 381 || 162.6 || 30.5

Any metal tank manufacturer can generally build a coolship , so local resources are likely to be available <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1327576813937196/?comment_id=1327588103936067&comment_tracking=%7B%22tn%22%3A%22R3%22%7D Conversation with Joe Wells on MTF. 06/11/2016.]</ref>. However, below are manufacturers that specialize in their construction for commercial breweries: * [httphttps://www.foedercrafters.com/koelschip/ koelship Foedercrafters.]

* [https://web.archive.org/web/20150509102029/http://www.browneandbitter.com/2015/05/spontaneous-fermentation-ii-success.html Amos Browne's second attempt (Browne and Bitter blog) with lessons learned from the first attempt.]