Mold

(In progress)

Mold or mould are multicellular fungi that grow in the form of filaments called hyphae that appear like long branch-like structures under a microscope. Although not a taxonomic designation, there are an estimated 10,000 - 300,000 of species of molds that live in a wide variety of environments ^[1]. In general they cause biodegredation of foods and other natural materials (such as wood in buildings), which has a wide role of effects depending on the species of mold. For example, some species of mold can be the cause of food spoilage, and other species play an important role in food production such as in cheese and soy sauce production ^[2]. Certain species of mold are thought to contribute precursors that effect flavor production in the toasting of oak barrels ^[3] Molds have also been used in the pharmaceutical industry to produce antibiotics and other medicines. Certain molds can cause allergic reactions as well as diseases from mold growth within the body or from mycotoxin production in exposed foods or from breathing spores from mold growth in buildings ^[2].

Mold in Beer and Health Concerns

Mold Growth in Beer

Although little studying has been done on mold growth in beer, it has been known to occur in barrel aged beers are fruited sour beers. Oxygen generally needs to be present in order for mold to grow. Mold growth on fruit that is in sour beer can occur if the fruit is floating above the surface of the beer, and enough oxygen is present (either from vacuum suck-back, oxygen permeability of the vessel, or sampling). For this reason, many commercial sour brewers will "punch down" the fruit frequently with a dish-like tool.

Preventing Mold Growth

If aging sour beer on whole fruit, use a punch-down tool frequently so that the alcohol and low pH kills any mold that might be present before it begins to grow. Homebrewers can gently swirl their carboys to accomplish the same thing.
Limit oxygen exposure to the beer.
Use diligent sanitation practices.
Inspect barrels for mold prior to use; discard barrels that have mold growth, or disassemble the barrel and vigorously clean/sanitize the wood before use. See the Barrel page for details on storing and maintaining barrels.

Health Concerns

A small number of molds can produce mycotoxins, which are poisonous substances, or aflatoxins, which are cancer-causing poisons. Some molds that do not produce toxins can still cause allergic reactions or respiratory problems ^[1]. Their effects can be accumulative, rather than immediately toxic as in the case of pathogenic bacteria. As a general rule of thumb, pigmented molds (non-white/grey) are more likely to produce poisonous substances (especially black mold which could be Aspergillus), however there are exceptions to this rule ^[4].

Identifying mold based on what it looks like is not a reliable way to determine if a mold is a cause of concern for health (need ref). If mold is present in beer, it might be possible for commercial breweries to remove the mold and send it to a lab to check if it is a toxic mold before allowing the beer to be consumed (need ref). Some homebrewers may decide to risk taking a chance that the mold will not cause illness, however we recommend discarding beer that has come into contact with mold, especially if serving to others (mold growing on SOFT fruits and vegetables with high moisture content can be contaminated below the surface ^[1]).

See the USDA website for more information on the health concerns of mold that grows on food.

Identifying Mold

As mentioned above, identifying the species of mold based on what it looks like with the naked eye is not a reliable way to identify it at the species level, and thus not a reliable way to know if the mold growth is safe. It is, however, usually easy to tell the difference between general mold growth and pellicle or yeast growth. Mold tends to look "fuzzy" or "hairy", where as yeast activity or pellicles tend to have evidence of CO2 production, and looks "creamy", "powdery", or "chalky". We recommend taking a picture through a hand lens when posting an image of what might be mold as this will make it easier to identify. See the images below for examples.

Mold vs Pellicle Examples

The following table shows examples of mold or pellicles from the Milk The Funk Facebook group, and the consensus on whether mold is likely present or not based on the image.

Mold or Pellicle?	Determination
	Pellicle or yeast fermentation activity, not mold.
	Undetermined, but the brewer shook the carboy and the mass went away, so probably not mold.
	Undetermined; the small green area in the middle of the pellicle might be mold.
	Occurred in a clean dubbel after adding prunes; pellicle, not mold.
	Mold growth during kettle souring (Lactobacillus was the only microbe pitched into the wort).
	Mold growth on top of blackberries.
	Small amount of pellicle, not mold.
	Green and fuzzy mold.
	Mold growth on an oak barrel bung. Beer is ok if the mold is scrubbed and removed; recommended to use rubber or silicon for the bung instead.
	Pellicle on top of green grapes, not mold.
	Mold growth on fruit that is floating above the surface of the beer.
	Partial pellicle on a kettle sour; probably a wild yeast contamination from the added fruits. Not mold.
	Mold growth from under-pitching with only one bottle of commercial beer dregs.
	Brettanomyces activity, not mold.
	Probably mold or another potentially unwanted microorganism from an attempt at collecting wild yeast from dried camomile.
	Partial pellicle, not mold.
	Pellicle, not mold.
	Image of mold through a hand lens; photo taken with an iPhone by Mark Trent.
	Identified in a lab to be Penicillium (considered a mold).
	Mold in a barrel that made the beer taste like soy sauce; potentially Aspergillus (some can be carcinogenic).
	Mold growth on an agar plate from swabbing persimmon in an attempt to catch wild yeast; probably not a dangerous mold.