FAQ
This FAQ will be used to assist brewers in getting past first timer questions and over initial hurdles of brewing with bacterium and alternative yeast cultures. Please review this from time-to-time because it will be updated as often as necessary.
Quick Q&A
I have a question
Q. I am new. I want to learn more or have a question.
A: This wiki is a good place to search for answers, but you should also try to look up the answer to your question in the book "American Sour Beers" by Michael Tonsmeire. Many answers can be found in these two resources. If it is not, post your question in Milk The Funk!
Do I need separate equipment
Q: Do I need separate equipment for Brett/Pedio/Lacto beers?
A: There are many different opinions on this, but we will state here the best balance between practical and cautious advise. Brettanomyces can be cleaned and sanitized just like regular yeast. Bacteria such as Pediococcus can be a little more hardy, but they also still die from intense cleaning and sanitizing. Maintain a very good cleaning and sanitizing regiment, and you shouldn't need different fermenting vessels if they are glass or stainless steel. Plastic is prone to microscopic scratches, which can help bacteria survive cleaning/sanitizing regiments, so separate plastic fermenters for beers that have bacteria (Lactobacillus or Pediococcus) in them should be considered. Since cold side plastic equipment such as auto siphons and hosing are cheap, it is recommended to go ahead and get separate plastic.
I have a question about pellicles
Q: I don't see a pellicle, is my beer OK?
A: The presence or lack of presence of a pellicle are not direct indicators of a good beer. A Pellicle forms when beer comes in contact with oxygen. Limit oxygen by taking samples only occasionally and if you have access to CO2, inject your fermentation vessel after pulling a sample. See pellicle for more information.
Q: How long does a pellicle take to form?
A: There are many variables and there is no one. It's all about the yeast and bacteria involved, o2 exposure, and time. Depending on all this, you may also never see a pellicle form. In the end, a pellicle only means there has been some exposure to an unknown amount of oxygen. Otherwise, pellicles have little meaning. See pellicle for more information.
Q: Do I need to wait for the pellicle to drop out before I package my beer?
A: The pellicle dropping out has no bearing on the readiness of the beer for packaging, nor the quality of the beer. Don't worry so much about pellicles! Instead, wait for a stabilized gravity for at least two months before packaging. See pellicle for more information.
Q: Is breaking the pellicle bad?
A: Although we recommend trying not to disturb the pellicle too much during sampling or moving the fermentation vessel, doing so isn't the end of the world. It will reform if oxygen is still present. If it happens, don't worry about it.
Why did my Lacto beer not sour
Q: My lactobacillus based beer did not turn out sour or even the least bit tart. Why?
A: The biggest factor leading to lack of souring while using lacto is due to the amount of hops in your recipe. Even as much as 2-3 ibu's will inhibit lactic acid production. Try brewing or kettle souring with no hops. See Sour Worting for more information.
Why did my Roeselare beer not sour
Q: I used Roeselare (or some other commercial mixed culture) and it did not sour yet. What do I do?
A: Sometimes Roeselare and other mixed cultures don't get the acidity that you might want. If it hasn't been a year yet, waiting longer may help, but sometimes it doesn't. If after a year the acidity is not high enough for you, try adding fruit such as cherries or raspberries. The fruit has citric acid in it, and the sugar content will partially be turned into lactic acid by the surviving bacteria (the brewer's yeast will be dead after a year). Brewing with no hops and a very high mash temperature (158°F-160°F) is highly recommended for next time. For more information, see Mixed Cultures and Mixed Fermentation.
What happened to my head retention
Q: How can I improve head retention in sours?
A: Contrary to the belief that acid is the cause of poor head retention, it is actually probably more due to the degradation of head formation proteins by Lacto. See the Lacto Foam Degradation page to see what you can do about it.
Will Brett clean up off-flavors
Q: My beer has off-flavour _____; will it go away if I pitch Brettanomyces?
A: It depends on the off-flavor. Typical yeast character such as moderate amounts of diacetyl, banana, clove, and other esters will often be changed by Brett. However, many other flavors from things like fusel alcohols will not. As the old saying goes, garbage in, garbage out. It's better to brew a clean beer and then add Brett, rather than try to recover a badly brewed beer by adding Brett.
Can I add Brett at bottling time
Q: Can I add Brett at bottling time to my beer fermented with only brewer's yeast?
A: Some people have gotten away with this, but unless you have experience with this, we don't recommend it. Brett will continue to ferment the residual sugars that Saccharomyces left behind in the bottle, and this could result in gushing or bottle bombs. One thing you could do is to take a sample of the beer, and add it to a jug with an airlock and pitch the Brett you are going to use into this sample. After two months, measure the gravity change. Each gravity point gives you about 0.5 volumes of CO2. Adjust the priming sugar accordingly. Alternatively, you can rack to the beer into a fermentation vessel that you are comfortable exposing Brett to, add the Brett, and wait a few months for the gravity to stabilize.
Where did the mouse taint/cherrios/captain crunch taste come from
Q: Q: Where did that Cheerios/Captn Crunch/Toasted cereal flavor come from?
A: It can come from Brettanomyces or Lactobacillus. It generally appears after force carbonating in a keg and ages out in 2-3 months. See Tetrahydropyridine for details.
I used regular yeast and Brett, but my beer isn't sour
Q: I made a beer with Saccharomyces and Brettanomyces, but the beer isn't sour. What do I do?
A: Brett only makes a beer "funky" and fruity. It does not produce a lot of acidity. You need to brew a beer using a lactic acid bacteria such as Lactobacillus or Pediococcus. Check out the Sour Worting and Mixed Fermentation pages.
Alternative Bacteria sources (yogurt, probiotics, etc.)
Q: Will this bacteria source work? Has anyone tried souring a beer with this? What temperature do I use?
A: Check out Alternative Bacteria Sources for a list of what some members have tried so far and their experiences.
What temperature do I kettle sour at
Q: I am making a kettle sour beer. What temperature do I hold at for my bacteria?
A: It depends on your Lactobacillus. Check out our recommendations on the Lacto Culture Chart. The Sour Worting page may also be helpful.
What pitching rate do I use for Lacto or Brett
Q: What pitching rate do I use for Lacto or Brett?
A: For Lacto, use around 500 mL to 1 liter starter volume for 5 gallons of wort. See the Lacto Starter Guide for more info. For Brett, it depends on if you are using Brett in secondary or primary. For secondary, no starter is necessary, although you may choose to make a starter anyway. For 100% Brettanomyces Fermentation lager pitching rates have been used with success. See the Brett Starter Guide for more information.
How do I maintain a culture
Q: How to I maintain a blend/a culture of ____?
A: The best way of storing your culture will vary depending on the organisms it contains and the resources you have available. See the pages for the relevant organisms for more information: Brettanomyces, Lactobacillus, and Pediococcus.
Can I repitch my sour yeast cake
Q: Can I repitch my sour yeast cake?
A: It is difficult to preserve the exact character of a blend, as the ratio of organisms will vary over time. Try repitching and see how you like the results. Pitching a fresh pitch of Saccharomyces yeast is a good idea.
Should I make a starter for commercial blend ____
Q: Should I make a starter for commercial blend ____?
A: You might want to if your commercial blend is nearing it's expiration date or wasn't handled properly, but making a starter may alter the proportions of the various organisms included in the blend, which may or may not effect the flavor profile of the resulting beer. Changing proportions is less likely with blends consisting of a single type of organism. See advice from Yeast Bay as an example of how to make a starter for a commercial blend.
When can I bottle/blend
Q: My beer is at 1.XXX---can I bottle it? Can I blend it?
A: The best guide is long term stability: if your gravity has remained stable between several readings, then your beer may be ready for packaging. However since the different organisms involved in sour beer production grow at different rates, a beer that was stable over a short period may begin fermenting again. Ideally you should look for stable gravity readings over a period of two months. When blending (especially with a non-sour beer such as a clean Saison), it is best to rest the blend in a fermenter for two months to make sure the gravity is stable. Don't assume that a low gravity clean beer such as a very dry Saison won't further attenuate once blended with a sour beer with Brett in it.
I want to buy a ph meter
Q: I want to buy a pH meter. What is a good one to buy?
A: We recommend two tried and true models, the Hach Pocket pro+ and the Milwaukee MW102. See PH Meter for more information.
I am traveling to _____, and want to visit some good breweries
Q: I am traveling to another state in the US. Any good recommendations on sour/funky breweries that I should visit?
A: Matt Miller maintains a map for just this purpose! Click here to check it out.
I want to brew a _____
Kettle Sour
We have two great pages that help you brew your first kettle sour. See the Sour Worting page, and the Lacto Culture Charts!
Gose
So, you're looking to brew a Gose (Gose-uh)? A Gose has become a favorite first time tart beer to brew. The dominant flavors in Gose include a lemon tartness, a herbal characteristic from coriander, and saltiness (the result of either local water sources or added salt). Gose beers typically do not have prominent hop bitterness, flavors, or aroma. The beers typically have a moderate alcohol content of 4 to 5% ABV. Our Milk The Funk Gose is a great place to start.
Sour Brown Ale or Lambic
There are many approaches to these styles of beer. They can be difficult styles to make with traditional processes. We recommend reading this wiki page and deciding on a method to use.
Berliner Weissbier
Berliner Weissbier, or Berliner Weisse, is a light, tart, low ABV, and refreshing beer that originated in Germany. It has a simple grain bill consisting of mostly pilsner and wheat (although other adjuncts such as chit malt are sometimes used). It's a great style to choose as a first sour beer, but it's also a great style to have on hand for any brewer (especially in the summer time), and is typically soured with Lactobacillus. Check out the Milk The Funk Berliner Weisse page for an easy recipe.