Mixed Fermentation

This article is about sour brewing methods using commercial cultures. For other sour brewing methods, see Brewing Methods.

For the purposes of this article, we are defining a mixed fermentation as any fermentation that consists of a combination of Saccharomyces, Brettanomyces, Lactobacillus, and Pediococcus cultures. Broadly speaking, there are two styles of mixed fermentations: "sour" fermentations and "funky" fermentations. "Sour" fermentations are characterized by their higher acidity and tart flavor, and require the use of a Lactic Acid Bacteria (LAB; generally Lactobacillus and/or Pediococcus). "Funky" fermentations generally do not contain LAB, but instead use a combination of Saccharomyces and Brettanomyces. Funky beers may be slightly tart, but are generally not considered sour. For both categories, the primary fermentation will be completed by yeasts such as Saccharomyces and/or Brettanomyces. For Funky Mixed Fermentations, see the Funky Mixed Fermentations page. For 100% Brettanomyces fermentations, see the 100% Brettanomyces Fermentation page.

It is important to mention that sour brewing in general has very few well-established "rules". Many methods can be used in conjunction with other Brewing Methods, and new methodologies are constantly being developed. Many of the methods used are determined by the types of microbes the brewer is working with. An article of this length cannot encompass all mixed fermentation methods. Instead it will provide a "big picture" view of the general methodologies. Towards this end, we divide mixed fermentation methods into two approaches: the traditional long fermentation method and an increasingly popular, short fermentation method. They are divided here as a device to illustrate the philosophy of each and facilitate the discussion of the techniques used for each methodology. The distinction of these two methods is however somewhat artificial, indeed many brewers use elements of both approaches to achieve their desired results. More detailed information can be found in Michael Tonsmeire's pivotal book on sour brewing, "American Sour Beers".

Sour Mixed Fermentation - The Basics

Sour fermentations require at least one Lactic Acid Bacteria (LAB), such as Lactobacillus or Pediococcus, and at least one yeast such as Saccharomyces or Brettanomyces. Many yeast companies offer Mixed Cultures that provide all of the microorganisms necessary to make a sour beer. The results of these commercial mixed cultures can be as varied as the cultures themselves. For example, some of these commercial mixed cultures produce lightly tart beer that may exhibit minimal funky flavors; others may produce intense sourness and assertive funk. This is dependent on the types of microbes in the mixed culture, their ratios, how old the cultures are, and what methods the brewer uses to encourage or discourage certain flavors. The brewer must understand that all of these microbes are complex organisms (some more complex than others). Not only do different species behave differently and produce different results under different conditions, but different strains of the same species also can also behave differently and produce different results under different conditions. Just as strains of Saccharomyces cerevisiae produce different results in clean beers (e.g., California Ale yeast versus Belgian Ale yeast), strains of Lactobacillus spp. and especially Brettanomyces spp. can also vary widely.

Beer styles that can be brewed using this method include Berliner Weissbier and the subcategories of American Wild Ale, which include Mixed-Fermentation Sour Beer and Soured Fruit Beer . Belgian sour styles such as Lambic, Gueuze, and Fruit Lambic, technically can only be produced by Spontaneous Fermentation. Flanders Red Ale and Oud Bruin styles can be brewed using pure cultures, but can also be brewed using spontaneous fermentation or a mix of using pure cultures and spontaneous fermentation.

Traditional Method - Long Fermentation

Introduction

The most basic method for making a mixed fermentation sour beer is to brew some simple wort (fresh extract or all grain) that is low in IBU's. Iso-alpha acids can inhibit many species and strains of LAB. Keeping the wort less than 6 IBU's is recommended in general, unless the brewer has information about their LAB culture that indicates that they can tolerate more. Mash hopping is one technique that can be used to limit the IBU's by about 70% . If hops are not required (commercial brewers may be required to use hops, while homebrewers aren't), they can be completely excluded from the recipe. The wort is often mashed at a high temperature to encourage the inclusion of complex carbohydrates in the final wort. The wort is then Primary fermented with a Saccharomyces strain to achieve the majority of attenuation, leaving behind the complex carbohydrates. The primary fermentation is then inoculated with a mixed culture of Brettanomyces, Lactobacillus and Pediococcus, either by moving the wort into barrels with active cultures or by inoculating the primary fermentation vessel (i.e. glass carboy when the method is used by home brewers). This inoculation then starts a secondary fermentation of the remaining complex carbohydrates which follows a slow progression between the microbes that are primarily active. This secondary fermentation may not show readily apparent sighs of active fermentation as in the primary fermentation but is often accompanied by the slow evolution of CO2 in the first 8 weeks and the eventual formation of a pellicle which may form quickly or very slowly. This method is still the most commonly used by commercial producers of modern and traditional belgian sour beer, with variations on the process occurring widely. While still widely used by homes brewers, fast fermentation methods such as Sour Worting other methods mentioned in this article are ever increasing in their use.

Wort Production

The grain bill and production for the wort doesn't have to be complex, in fact many sour breweries produce their full line of sours from 2-3 base sour recipes which are then modified after aging by blending, the addition of fruit, dry hops or simply packaging them without alteration. For sour blonde ales, a simple grain bill of about 70% Pilsner malt and 30% malted wheat can be used (these can be replaced by Pilsner and wheat unhopped extracts for the extract brewer. See Lambic Brewing by Steve Piatz for a good extract recipe). Some crystal and a small amount of roasted malts an be used for sour brown ales. Some higher chain sugars or even starches can be included for beers that will be aged for a long time and include Brettanomyces, or Brettanomyces and Pediococcus (Pediococcus generally should not be used without Brettanomyces. See the Pediococcus page for more details). Performing a Turbid Mash is the traditional way to include starches in the wort. However other methods such as steeping some oats or flaked wheat during the boil , or running off over a bag of flaked oats or wheat on the way to the kettle can also impart starches that won't be converted to sugars by the mash. This step is completely optional, however it may be very beneficial to make sure some higher chain sugars or starches are available in the wort if the brewer wants to rely on Pediococcus for producing most of the acidity. Extract brewers can use 0.25 lbs. (0.11 kg) of Maltodextrin , or hot steep a pound of flaked wheat, flaked oats, or carapils malt.

Bug Inoculation

Once the wort is produced and chilled, the mixed culture can be pitched as normal. If using a mixed culture from a commercial yeast lab, it is usually recommended to not make a yeast starter with it because the starter will throw off the intended ratios of the microbes. Instead of buying a single mixed culture, a brewer can create their own mixed culture by combining their own ratios from single cultures of yeast and bacteria. A single mixed culture can be supplemented by adding pure cultures from different yeast labs as well. Another suggestion that often helps produce a higher quality sour beer is to supplement the mixed culture with a Commercial Sour Beer Inoculation. In general, the more diversity of microbes, the more complex a sour beer can potentially be. Using a Sour Worting method in conjunction with this method can help increase acidity that may not otherwise be produced by some commercial blends (Wyeast Roeselare is known for this characteristic, for example).

Stages of Fermentation

Conceptual graph of traditional souring microbe and wort dynamics. Y-axis for each microbe group depicts relative activity which combines in a conceptual sense: growth, acidification of wort, attenuation and production of flavor compounds. Plot drawn by Drew Wham based on concepts discussed in American Sour Beer and Wild Brews .

Primary Fermentation

Primary Fermentation by Saccharomyces is generally conducted in the same way for a sour beer as for a non-sour beer. Depending on the intended final result the brewer might select a neutral ale strain (WLP 001-Wyeast 1056, WLP036-Wyeast 1007) to provide a neutral background for the souring microbes to act on. Alternatively, the brewer may use a belgian-farmhouse strain (see Saccharomyces page for a comprehensive list) to increase the phenol characters of the beer which can then be acted on by Brettanomyces. This primary fermentation can take place in any vessel suitable for a normal Saccharomyces fermentation, as always fermentation temperature control is of critical importance and temperature profiles for this fermentation step should match those suggested for the strain of Saccharomyces selected for this step. Once active fermentation has subsided the mostly attenuated wort can then be moved on to the secondary fermenting vessel. There is some variation in common practice as to whether or not the primary fermentation yeast should be carefully settled out, moving over bright clear beer only, or if un-settled cloudy high yeast population wort is moved to the secondary vessel. New Belgium moves their lager primary fermented beer after centrifuging, indicating that this centrifuged beer exhibits cleaner characters from secondary fermentation faster than un-centrifuged beer, allowing the resulting sour beer to be ready for packaging more quickly and Wild Brews . ]] Matt Miller outlines a three stage fermentation process on his blog article Understanding, Brewing, and Blending a Lambic Style Kriek . See the article for a much more detailed process. Matt was also interviewed about his process by James Spencer on the BasicBrewing Radio podcast. In summary, his process is as follows:

1. Produce a low hopped wort (see the Standard Method above).
2. After boiling the wort, cool it to 110-120°F (43.3-48.9°C), and run it into the fermenter.
3. If possible, purge the fermenter of oxygen with CO2. Pitch a pure culture of Lactobacillus, and if possible hold the temperature between 110-120°F (43.3-48.9°C) for 2-4 days (see the Souring in the Primary Fermenter page for more details).
4. After 2-4 days, cool the wort to 65-70°F (18.3-21.1°C), oxygenate the wort, and pitch a starter of Saccharomyces.
5. After primary fermentation has finished, transfer the beer to a secondary vessel for aging.
6. Add one or more cultures of Brettanomyces. Optionally, also pitch a culture of Pediococcus and/or bottle dregs from commercial sours (see Commercial Sour Beer Inoculation for more details on using commercial bottle dregs). For more funky Brett flavors, do not make a starter for the Brett.
7. Age for 6-18 months, or longer if desired.
8. For the last two months of aging, fruit, spices, and/or oak can be added directly into the fermenter. Also consider Blending with other sour beers.

Finishing Mixed Fermentations

Reusing a Sour Yeast Cake

Reusing a sour yeast cake can often provide great results. Brewers have reported success repitching on very old yeast cakes (2 years) without getting off flavors from yeast autolysis. After several months, Saccharomyces tends to die off due to the low pH in a sour beer. The bacterias and Brettanomyces tend to survive the lower pH, and their cell counts can be high in even an old yeast cake. By pitching new wort on an old sour yeast cake, these microbes (particularly the Lactobacillus) have access to the simple sugars in the wort . In general, washing the yeast cake is not necessary.

Some brewers will harvest a certain amount of trub from their fermenters (500ml for example), and use only this amount to inoculate a new batch of beer. This will allow the brewer to control the amount of dead trub material that goes into the fresh beer. Michael Tonsmeire often advises that the brewer also pitch a fresh culture of Saccharomyces .

Some brewers have good success reusing a yeast cake or a portion of a yeast cake by leaving the wort in contact with the old yeast cake for 3-4 days. After 3-4 days, a fresh culture of Saccharomyces is pitched to finish the fermentation. The 3-4 day head start gives the souring bacterias a head start and results in a low pH beer. The harvested yeast cake can also be pitched at the same time as a fresh culture of Saccharomyces, or afterwards. The decided timing on when to pitch the harvest sour yeast cake will effect the outcome of the sour beer. Early pitching of the sour yeast cake generally produces a more acidic beer, and later pitching generally produces a less acidic beer.

As with all methods, the species and strains of the microbes being used should always be taken into consideration. Experimentation and repeated processes should be carefully employed by the brewer in order to find the best results for their cultures. For example, using different strains of Saccharomyces cerevisiae as the primary fermenter can produce widely different results.

Adding Fruit

(To do)

When to Bottle

(To do)

Bottling

(To do)

See Also

Additional Articles on MTF Wiki

• Alternative Bacteria Sources
• Sour Worting
• Lactobacillus
• Pediococcus
• Brettanomyces
• Saccharomyces
• Spontaneous Fermentation